The fundamental operation mechanisms of nc-SiOX≥0:H based tunnel recombination junctions revealed
Source abstract
Abstract
Two terminal multi-junction (MJ) photovoltaic (PV) devices are well established concepts to increase the solar-to-electrical power conversion in reference to single PV junctions. In multi-junction PV devices two consecutive sub-cells are interconnected using a tunnel recombination junction (TRJ) in which the light excited holes of one sub-cell recombine with the light excited electrons of the other sub cell. An ideal TRJ is an ohmic contact with non-rectifying behaviour. TRJ’s based on p- and n-doped silicon-oxides have been successfully applied in a variety of hybrid multi-junction PV devices in which tunnelling and trap-assisted tunnelling over width of 5–20 nm rules the TRJ’s recombination kinetics. In this contribution the qualitative fundamental working principles of tunnel recombination junctions based on p- and n-doped silicon and silicon-oxide alloys are revealed using both electrical modelling and experiments based on a unique set of tandem lab cells (four types based on four different PV materials) combined with structural variations in TRJ architectures. The study results in design rules for the integration of silicon-oxide based TRJ’s and provides fundamental insights into the sensitivity of the electrical performance of the TRJ’s to doping concentrations, to alignment of the conduction and valence bands of consecutive sub-cells, to the nature of interface defects, to the growth of amorphous and crystalline phases and its dependence on substrate or seed layers and to the nanoscale thicknesses of the TRJ layers.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Energy yield of bifacial textured perovskite/silicon tandem photovoltaic modules
2. Toward scalable perovskite-based multijunction solar modules
3. Structure and physical properties evolution of ITO film during amorphous-crystalline transition using a highly effective annealing technique10.1016/j.ceramint.2019.05.143 ↗
4. Monolithic thin-film chalcogenide–silicon tandem solar cells enabled by a diffusion barrier
5. III–V-On-silicon solar cells reaching 33% photoconversion efficiency in two-terminal configuration10.1038/s41560-018-0125-0 ↗
6. 20%-efficient epitaxial GaAsP/Si tandem solar cells
7. Designing a hybrid thin-film/wafer silicon triple photovoltaic junction for solar water splitting10.1002/pip.3085 ↗
8. Wafer surface tuning for a-Si:H/μc-Si:H/c-Si triple junction solar cells for application in water splitting10.1016/j.egypro.2016.11.327 ↗
9. In situ silicon oxide based intermediate reflector for thin-film silicon micromorph solar cells10.1063/1.2794423 ↗
10. Properties of mixed phase n-doped silicon oxide layers and application in micromorph solar cells10.1016/j.solmat.2013.05.030 ↗
11. Improved conversion efficiencies of thin-film silicon tandem (MICROMORPH™) photovoltaic modules10.1016/j.solmat.2015.08.022 ↗
12. Inverted pyramidally-textured PDMS antireflective foils for perovskite/silicon tandem solar cells with flat top cell10.1016/j.nanoen.2018.11.018 ↗
13. High-stable-efficiency tandem thin-film silicon solar cell with low-refractive-index silicon-oxide interlayer10.1109/JPHOTOV.2014.2357495 ↗
14. Implications of TCO topography on intermediate reflector design for a-Si/μc-Si tandem solar cells—Experiments and rigorous optical simulations10.1109/JPHOTOV.2013.2279204 ↗
15. Low-refractive-index and high-transmittance silicon oxide with a mixed phase of n-type microcrystalline silicon as intermediate reflector layers for tandem solar cells10.1016/j.solmat.2013.10.036 ↗
16. The relation between precursor gas flows, thickness dependent material phases and opto-electrical properties of doped a/nc-SiOX≥0:H films
17. Doped hydrogenated nanocrystalline silicon oxide layers for high-efficiency c-Si heterojunction solar cells10.1002/pip.3256 ↗
18. Modulated surface textured glass as substrate for high efficiency microcrystalline silicon solar cells10.1016/j.solmat.2014.11.013 ↗
19. Micro-textures for efficient light trapping and improved electrical performance in thin-film nanocrystalline silicon solar cells10.1063/1.4826639 ↗
20. An expedient semi-empirical modelling approach for optimal bandgap profiling of stoichiometric absorbers: A case study of thin film amorphous silicon germanium for use in multijunction photovoltaic devices
21. Advanced textured monocrystalline silicon substrates with high optical scattering yields and low electrical recombination losses for supporting crack-free nano- to poly-crystalline film growth
22. Synopsys · 2018
23. The role of heterointerfaces and subgap energy states on transport mechanisms in silicon heterojunction solar cells10.1002/pip.3300 ↗
24. Schicho · 2011
25. Theoretical evaluation of contact stack for high efficiency IBC-SHJ solar cells10.1016/j.solmat.2018.06.021 ↗
26. Substrate dependent stability and interplay between optical and electrical properties in μc-Si:H single junction solar cells10.1016/j.solmat.2010.04.043 ↗
27. Microcrystalline silicon oxide (μc-Siox:H) alloys: A versatile material for application in thin film silicon single and tandem junction solar cells10.1016/j.jnoncrysol.2011.12.019 ↗
28. Chemical stability and performance of doped silicon oxide layers for use in thin film silicon solar cells10.1109/JPHOTOV.2018.2882650 ↗
29. Current matching optimization in high-efficiency thin-film silicon tandem solar cells
30. Correlation of current mismatch and fill factor in amorphous and nanocrystalline silicon based high efficiency multi-junction solar cells
31. Doped microcrystalline silicon oxide alloys for silicon-based photovoltaics: Optoelectronic properties, chemical composition, and structure studied by advanced characterization techniques10.1002/pssa.201533022 ↗
32. Silicon filaments in silicon oxide for next-generation photovoltaics10.1002/adma.201104578 ↗
33. Resolving the nanostructure of plasma-enhanced chemical vapor deposited nanocrystalline SiOx layers for application in solar cells10.1063/1.4953566 ↗
34. Effects of doping concentration on the microstructural and optoelectrical properties of boron doped amorphous and nanocrystalline silicon films10.1016/j.matchemphys.2013.07.017 ↗
35. Nano-composite microstructure model for the classification of hydrogenated nanocrystalline silicon oxide thin films10.1016/j.surfcoat.2015.09.016 ↗
36. Influence of microstructure and composition on hydrogenated silicon thin film properties for uncooled microbolometer applications
37. Real-time studies of amorphous and microcrystalline Si:H growth by spectroscopic ellipsometry and infrared spectroscopy10.1016/j.tsf.2003.11.233 ↗
38. Hydrogenated amorphous silicon oxide containing a microcrystalline silicon phase and usage as an intermediate reflector in thin-film silicon solar cells10.1063/1.3592208 ↗
39. An improved silicon-oxide-based intermediate-reflector for micromorph solar cells10.1002/pssc.201200243 ↗
40. Development of wider bandgap n-type a-Siox:H and μc-SiOx:H as both doped and intermediate reflecting layer for a-Si:H/a-Si1−XGeX:H tandem solar cells10.1007/s13391-016-4004-1 ↗
41. Transport in tunneling recombination junctions: A combined computer simulation study10.1063/1.1811375 ↗
42. Design and optimization of hole collectors based on nc-SiOx :H for high-efficiency silicon heterojunction solar cells10.1016/j.solmat.2020.110779 ↗