A study of green Sn–xZn photovoltaic ribbons for solar cell application
Source abstract
Abstract
Abstract Sn– x Zn ( x =9, 25, and 50 wt%) alloy solders were applied in a photovoltaic (PV) ribbon. The effects of intermetallic compounds (IMCs) on series resistance and bond reliability of Sn– x Zn PV modules were investigated. Cu 5 Zn 8 and AgZn 3 IMCs were found at the interfaces (solder/Cu and solder/Ag). The Zn content in the solder dominated the growth behavior of IMCs at the interface. The IMC thickness increased with increasing Zn content in the solder, and thus the bond reliability of the PV module deteriorated. After a bias was applied for a long duration, the interfacial characteristics and solder matrix were affected by the bias-induced thermal diffusion. In addition, the evolution in IMCs due to thermal diffusion during bias changed the original series resistance of the ribbon material and affected the series resistance of the PV module.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Inhibiting MoS2 formation by introducing a ZnO intermediate layer for Cu2ZnSnS4 solar cells10.1016/j.matlet.2014.05.089 ↗
2. High performance and high stability mechanisms of microcrystalline silicon-based thin-film solar cells deposited by laser-assisted plasma-enhancement chemical vapor deposition system10.1016/j.solener.2014.05.039 ↗
3. Progress in laser-crystallized thin-film polycrystalline silicon solar cells: intermediate layers, light trapping, and metallization10.1109/JPHOTOV.2013.2280016 ↗
4. Effects of electrical current on microstructure and interface properties of Sn–Ag–Cu photovoltaic ribbons10.2320/matertrans.M2013110 ↗
5. Interfacial reactions between Cu and SnAgCu solder doped with minor Ni10.1016/j.jallcom.2014.10.121 ↗
6. Durability of Pd-free solder between copper interconnect and silicon in photovoltaic cells10.1002/pip.944 ↗
7. Development of high-temperature solders: review10.1016/j.microrel.2012.02.018 ↗
8. Temperature dependence of surface tension of Sn–Ag alloys10.1007/s11665-013-0858-7 ↗
9. Effect of polarization on Sn–Zn solders alloys in alkaline electrolyte10.1016/j.jallcom.2014.04.034 ↗
10. Microstructure and electrical mechanism of Sn–xAg–Cu PV-ribbon for solar cells10.1016/j.mee.2013.10.012 ↗
11. Hansen · 1989
12. Interfacial reaction of Sn–Ag–Cu lead-free solder alloy on Cu: a review10.1155/2013/123697 ↗
13. Mechanical strength and failure characterization of Sn–Ag–Cu intermetallic compound joints at the microscale10.1007/s11664-011-1836-1 ↗
14. Creep, stress relaxation, and plastic deformation in Sn–Ag and Sn–Zn eutectic solders10.1007/s11664-997-0252-z ↗
15. Comparative study of wetting behavior and mechanical properties (microhardness) of Sn–Zn and Sn–Pb solders10.1016/j.mejo.2005.12.010 ↗
16. Effect of zinc content on microstructural evolution and electrification-fusion-induced failure mechanism of Sn–xZn alloys10.2320/matertrans.M2010259 ↗
17. Effect of thermal aging on the interfacial structure of SnAgCu solder joints on Cu10.1016/j.microrel.2006.12.006 ↗
18. Adhesion strength of the Sn–9Zn–xAg/Cu interface10.1007/s11664-003-0136-9 ↗
19. Thermoelectric characteristics and tensile properties of Sn–9Zn–xAg lead-free solders10.1016/j.jallcom.2005.11.011 ↗