Depth-resolved analysis of the effect of RbF post deposition treatment on CIGSe with two different Cu concentrations
Source abstract
Abstract
Abstract Photovoltaic devices based on Cu(In,Ga)Se2 (CIGSe) absorbers are among the most attractive non-Si alternatives. The key to their steadily increasing efficiency is a post-deposition treatment (PDT) with alkali salts. For co-evaporated CIGSe, a RbF-PDT was demonstrated as the most efficient, however, the mechanism of the RbF influence on the CIGSe absorber is not completely understood. Here, we focus on the impact of RbF on the surface of co-evaporated CIGSe absorbers in dependence on their bulk composition. Surface-as well as bulk-sensitive methods with overlapping information depths are used to examine an overall depth profile of RbF-free and RbF-treated CIGSe samples with different Cu contents. We show a gradual depletion of copper towards the surface for the as-deposited CIGSe absorber layers. The following RbF-PDT sharpens this effect especially for the sample grown with the overall lower Cu content. Under the Cu-depleted surface layer, the composition of the CIGSe gradually changes until it reaches the respective bulk composition. As a result of the RbF-PDT, Ga diffuses towards the surface and Rb gets incorporated at the surface where GaF3 and RbInSe2 secondary phases are formed, respectively. A higher Cu content leads to less surface oriented Ga diffusion, less Rb incorporation and to a thinner RbInSe2 layer. A thinner RbInSe2 barrier layer, in turn, maintains the gain in open-circuit voltage and prevents the fill factor loss of the CIGSe device.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. In-depth analysis of chloride treatments for thin-film CdTe solar cells10.1038/ncomms13231 ↗
2. Postdeposition processing of SnS thin films and solar cells: prospective strategy to obtain large, sintered, and doped SnS grains by recrystallization in the presence of a metal halide flux10.1021/acsami.9b03213 ↗
3. New world record efficiency for Cu(In,Ga)Se2 thin‐film solar cells beyond 20%10.1002/pip.1078 ↗
4. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
5. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
6. Cd-free Cu(In,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.35%10.1109/JPHOTOV.2019.2937218 ↗
7. Effectiveness of a RbF post deposition treatment of CIGS solar cells in dependence on the Cu-content of the absorber layer10.1109/JPHOTOV.2019.2929418 ↗
8. Group III elemental composition dependence of RbF post deposition treatment effects on Cu(In,Ga)Se2 thin films and solar cells10.1021/acs.jpcc.8b00079 ↗
9. Diffusion of Rb in polycrystalline Cu(In,Ga)Se2 layers and effect of Rb on solar cell parameters of Cu(In,Ga)Se2 thin-film solar cells10.1063/1.5044629 ↗
10. Effects of rubidium fluoride and potassium fluoride postdeposition treatments on Cu(In,Ga)Se2 thin films and solar cell performance10.1021/acs.chemmater.7b03412 ↗
11. Impact of a RbF postdeposition treatment on the electronic structure of the CdS/Cu(In,Ga)Se2 heterojunction in high-efficiency thin-film solar cells10.1021/acsenergylett.7b00720 ↗
12. Evaluation of recombination losses in thin film solar cells using an LED sun simulator - the effect of RbF post-deposition on CIGS solar cells10.1051/epjpv/2018006 ↗
13. Analysis of recombination mechanisms in Rbf-treated CIGS solar cells10.1109/JPHOTOV.2018.2877596 ↗
14. Direct insights into RbInSe2 formation at Cu(In,Ga)Se2 thin film surface with RbF postdeposition treatment10.1063/1.5044244 ↗
15. Effect of alkali metal atom doping on the CuInSe2-based solar cell absorber10.1021/acs.jpcc.7b03083 ↗
16. In vacuo XPS investigation of Cu(In,Ga)Se2 surface after RbF postdeposition treatment10.1016/j.tsf.2018.09.026 ↗
17. Elucidating the mechanism of a RbF post deposition treatment in CIGS thin film solar cells10.1002/solr.201800156 ↗
18. Injection current barrier formation for RbF postdeposition-treated Cu(In,Ga)Se2-based solar cells10.1002/admi.201701007 ↗
19. Evolution of opto-electronic properties during film formation of complex semiconductors10.1038/srep45463 ↗
20. The high kinetic energy photoelectron spectroscopy facility at BESSY progress and first results10.1016/j.nima.2008.12.244 ↗
21. Glow discharge optical emission spectrometry for quantitative depth profiling of CIGSe thin-films10.1039/C9JA00075E ↗
22. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
23. Chemical bath deposition of Zn(O,S) and CdS buffer: influence of Cu(In,Ga)Se2 grain orientation10.1063/1.4788717 ↗
24. A closer look at initial CdS growth on high-efficiency Cu(In,Ga)Se2 absorbers using surface-sensitive methods
25. Effects of KF and RbF post deposition treatments on the growth of the CdS buffer layer on CIGS thin films - a comparative study10.1016/j.solmat.2019.109997 ↗
26. Defect-induced nonpolar-to-polar transition at the surface of chalcopyrite semiconductors10.1103/PhysRevB.64.241304 ↗
27. Reconstruction and energetics of the polar (112) and (1-1-2-) versus the nonpolar (220) surfaces of CuInSe210.1103/PhysRevB.65.081402 ↗
28. Stability of surfaces in the chalcopyrite system10.1063/1.2192638 ↗
29. Solar cell fill factors: general graph and empirical expressions10.1016/0038-1101(81)90062-9 ↗
30. Kodalle · 2020
31. Tougaard · 2002
32. Photoelectron angular distribution parameters for elements z = 1 to z = 54 in the photoelectron energy range 100–5000 eV10.1006/adnd.2002.0886 ↗
33. A one-dimensional Fickian model to predict the Ga depth profiles in three-stage Cu(In,Ga)Se210.1063/1.4880298 ↗
34. Surface Cu depletion of Cu(In,Ga)Se2 films: an investigation by hard X-ray photoelectron spectroscopy10.1016/j.actamat.2009.04.029 ↗
35. In situ X-ray photoelectron spectroscopy study of the oxidation of CuGaSe210.1016/j.susc.2005.01.054 ↗
36. Reliable wet-chemical cleaning of natively oxidized high-efficiency Cu(In,Ga)Se2 thin-film solar cell absorbers10.1063/1.4903976 ↗
37. Na-Induced effects on the electronic structure and composition of Cu(In,Ga)Se2 thin film surfaces10.1063/1.115783 ↗
38. Rubidium distribution at atomic scale in high efficient Cu(In,Ga)Se2 thin-film solar cells, Appl
39. Preparation and characterization of gallium (iii) fluoride thin films10.1016/0040-6090(89)90140-5 ↗
40. Synchrotron-based spectroscopy for the characterization of surfaces and interfaces in chalcopyrite thin-film solar cells10.1016/j.solmat.2010.12.042 ↗
41. KF post deposition treatment in co-evaporated Cu(In,Ga)Se2 thin film solar cells: beneficial or detrimental effect induced by the absorber characteristics10.1002/pip.2924 ↗
42. Properties of co-evaporated RbInSe2 thin films10.1002/pssr.201800564 ↗
43. Composition dependence of defect energies and band alignments in the Cu(In1-xGax)(Se1-ySy)2 alloy system10.1063/1.1432126 ↗
44. Band alignment at the CdS/Cu(In,Ga)S2 interface in thin-film solar cells10.1063/1.1861958 ↗
45. On the combined effects of window/buffer and buffer/absorber conduction-band offsets, buffer thickness and doping on thin-film solar cell performance10.1016/j.solmat.2013.10.037 ↗
46. Band-gap engineering in CdS/Cu(In,Ga)Se2 solar cells10.1063/1.362533 ↗