journal article·2018-03

Light-induced current mapping in oxide based solar cells with nanoscale resolution

Shrabani Panigrahi, Tomás Calmeiro, Rodrigo Martins, Elvira Fortunato

Publisher page

Abstract

Abstract Transport properties of photo-induced charge carriers through different grains in the polycrystalline photovoltaic devices strongly depend on the microstructural pattern of the active layers. Therefore, photocurrent mapping with nanoscale resolution is important to know about the electrical responses of the different grains in the polycrystalline photovoltaic devices. Here, we have used photoconductive atomic force microscopy for mapping the photocurrent with nanoscale resolution of two types of ZnO nanorods/Cu2O based solar cells. The morphology and current have been measured simultaneously with nanoscale resolution from the top surfaces of the devices at different applied voltages. It is demonstrated that the nanostructure of the active layers is one of the most important variables determining device performances. Different local photovoltaic performances have been observed from these two devices due to various microstructural and electrical phenomena of their seed layers. On the other hand, significant variations in short-circuit current have been observed from different grains of the devices which appeared more alike in the micrograph owing to various transport properties of photocarriers. It is observed that the grain boundaries are more preferable for charge collection over the grain interiors. It shows a higher short circuit current close to the boundary than the grain inside. This study illustrates an important area for future fundamental research to enhance the performances of the polycrystalline photovoltaic devices through better control of morphology and improving the inherent properties of the active layers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Copper-based nanomaterials and applications · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells10.1038/nature18306 ↗
2. Flexible high power-per-weight perovskite solar cells with chromium oxide-metal contacts for improved stability in air10.1038/nmat4388 ↗
3. High efficiency graphene solar cells by chemical doping10.1021/nl204414u ↗
4. Interfacial degradation of planar lead halide perovskite solar cells10.1021/acsnano.5b03687 ↗
5. Approaching truly sustainable solar cells by the use of water and cellulose derivatives10.1039/C6GC02625G ↗
6. Toward totally flexible dye-sensitized solar cells based on titanium grids and polymeric electrolyte10.1109/JPHOTOV.2016.2514702 ↗
7. Construction of nanowire CH3NH3PbI3-based solar cells with 17.62% efficiency by solvent etching technique10.1016/j.solmat.2017.04.018 ↗
8. P3HT as a pinhole blocking back contact for CdTe thin film solar cells10.1016/j.solmat.2017.07.005 ↗
9. Luminescent downshifting by photo-induced sol-gel hybrid coatings: accessing multifunctionality on flexible organic photovoltaics via ambient temperature material processing10.1002/aelm.201600288 ↗
10. K.H. Kim, M.S. Kim, B.T. Ahn, J.H. Yun, K. HoonYoon, in: Proceedings of the IEEE Photovoltaic Energy Conversion, 2006, pp. 575–578.10.1109/WCPEC.2006.279521 ↗
11. Synthesis and characterization of ZnO nanowires grown on different seed layers: the application for dye-sensitized solar cells10.1016/j.renene.2013.05.006 ↗
12. Improving device efficiency of polymer/fullerene bulk heterojunction solar cells through enhanced crystallinity and reduced grain boundaries induced by solvent additives10.1002/adma.201101274 ↗
13. Microscopic investigation of grain boundaries in organolead halide perovskite solar cells10.1021/acsami.5b09801 ↗
14. Current collecting grids for ITO-free solar cells10.1002/aenm.201100552 ↗
15. An applied light-beam induced current study of dye-sensitised solar cells: photocurrent uniformity mapping and true photoactive area evaluation10.1063/1.4890935 ↗
16. Perovskite solar cell stability in humid air: partially reversible phase transitions in the PbI2-CH3NH3I-H2O system10.1002/aenm.201600846 ↗
17. Morphology of polymer/fullerene bulk heterojunction solar cells10.1039/B510618B ↗
18. Study of the growth morphology of TiO2 thin films by AFM and TEM10.1016/S0257-8972(01)01029-5 ↗
19. Scanning transmission X-ray microscopy of polymer nanoparticles: probing morphology on sub-10 nm length scales10.1088/0957-4484/22/26/265710 ↗
20. Quantitative nanoscale mapping with temperature dependence of the mechanical and electrical properties of poly(3-hexylthiophene) by conductive atomic force microscopy10.1021/acs.jpcc.5b02197 ↗
21. Layer number dependence of MoS2 photoconductivity using photocurrent spectral atomic force microscopic imaging10.1021/nn506924j ↗
22. Variable wavelength photocurrent mapping on PbS quantum dot: fullerene thin films by conductive atomic force microscopy10.1088/0268-1242/26/9/095002 ↗
23. Mapping the photoresponse of CH3NH3PbI3 hybrid perovskite thin films at the nanoscale10.1021/acs.nanolett.5b04157 ↗
24. Mapping local photocurrents in polymer/fullerene solar cells with photoconductive atomic force microscopy10.1021/nl062989e ↗
25. Nanoscale imaging of photo current and efficiency in CdTe solar cells10.1021/nn5052585 ↗
26. Spatially resolved photocurrent mapping of operating organic photovoltaic devices using atomic force photovoltaic microscopy10.1063/1.2830695 ↗
27. Origin of nanoscale variations in photoresponse of an organic solar cell10.1021/nl9040516 ↗
28. Probing the photovoltage and photocurrent in perovskite solar cells with nanoscale resolution10.1002/adfm.201504451 ↗
29. High-efficiency oxide solar cells with ZnO/Cu2O heterojunction fabricated on thermally oxidized Cu2O sheets10.1143/APEX.4.062301 ↗
30. Oxide-based solar cell: impact of layer thicknesses on the device performance10.1021/acscombsci.6b00154 ↗
31. Effect of different dopant elements on the properties of ZnO thin films10.1016/S0042-207X(01)00322-0 ↗
32. Ga-doping effects on electrical and luminescent properties of ZnO:(La,Eu)OF red phosphor thin films10.1063/1.1594817 ↗
33. Properties of ZnO:Al films prepared by spin coating of aged precursor solution10.5012/bkcs.2010.31.01.112 ↗
34. The physical properties of Al-doped zinc oxide films prepared by RF magnetron sputtering10.1016/S0040-6090(97)00215-0 ↗
35. Effect of AZO seed layer on electrochemical growth and optical properties of ZnO nanorod arrays on ITO glass10.1088/0957-4484/22/44/445602 ↗
36. Effect of AZO substrates on self-seeded electrochemical growth of vertically aligned ZnO nanorod arrays and their optical properties10.1155/2012/457904 ↗
37. Growth and optical properties of ZnO nanorod arrays on Al-doped ZnO transparent conductive film10.1186/1556-276X-8-158 ↗
38. Uniform arrays of ZnO 1D nanostructures grown on Al: ZnO seeds layers by hydrothermal method10.1166/jnn.2013.7773 ↗
39. Structural properties of zinc oxide nanorods grown on Al-doped zinc oxide seed layer and their applications in dye-sensitized solar cells10.3390/ma7042522 ↗
40. Al-doped ZnO thin film: a new transparent conducting layer for ZnO nanowire-based dye-sensitized solar cells10.1021/jp1008412 ↗
41. Investigating the role of grain boundaries in CZTS and CZTSSe thin film solar cells with scanning probe microscopy10.1002/adma.201103470 ↗
42. Benefit of grain boundaries in organic–inorganic halide planar perovskite solar cells10.1021/acs.jpclett.5b00182 ↗
43. The impact of charged grain boundaries on thin-film solar cells and characterization10.1063/1.2042530 ↗
44. Enhanced electrical properties at boundaries including twin boundaries of polycrystalline CdTe thin-film solar cells10.1039/C5CP00564G ↗
45. Influence of seed layers on the vertical growth of ZnO nanowires by low-temperature wet chemical bath deposition on ITO-coated glass substrate10.1111/j.1747-1567.2012.00817.x ↗