Electrical properties of patterned photoactive layers in organic photovoltaic modules
Source abstract
Abstract
The scaling of thin film photovoltaics to a commercially viable size relies on the series connection of multiple small cells into modules. These interconnections are typically formed by three patterning steps, each of which have an impact on the series resistance and consequently on the total module performance. Here, we implement the transmission line method for the complete analysis of the P2 patterning step of the photoactive layer in organic photovoltaic modules. Devices are investigated with a sample design that allows for a comparative study of the P2 connection on the solar cell performance. We compare subtractive mechanical scribing to a newly developed additive pre-patterning method for the P2 step. Aerosol Jet printed pre-patterning lines of low surface energy and conductive poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) modified with a fluorosurfactant repel the subsequently spray coated photoactive layer. Furthermore, the influence of MoO3 in the P2 pattern is elucidated, displaying a substantial increase in series resistance and decrease in device performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Solar cell efficiency tables (version 46)10.1002/pip.2637 ↗
2. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
3. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
4. Polymer homo-tandem solar cells with best efficiency of 11.3%10.1002/adma.201404220 ↗
5. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
6. Upscaling from single cells to modules – fabrication of vacuum- and ITO-free polymer solar cells on flexible substrates with long lifetime10.1039/C3TC31859A ↗
7. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
8. Ultrasonic spray coating of 6.5% efficient diketopyrrolopyrrole-based organic photovoltaics10.1109/JPHOTOV.2014.2352153 ↗
9. Concurrently pumped ultrasonic spray coating for donor: acceptor and thickness optimization of organic solar cells10.1016/j.orgel.2013.01.023 ↗
10. Ultrasonic spray deposition for production of organic solar cells10.1016/j.solmat.2008.10.026 ↗
11. High-volume processed, ito-free superstrates and substrates for roll-to-roll development of organic electronics
12. Roll-to-roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
13. Determination of solvent systems for blade coating thin film photovoltaics10.1002/adfm.201501039 ↗
14. High precision processing of flexible P3HT/PCBM modules with geometric fill factor over 95%10.1016/j.orgel.2014.06.006 ↗
15. Semitransparent OPV modules pass environmental chamber test requirements10.1016/j.solmat.2012.09.031 ↗
16. Perovskite solar cells and large area modules (100cm2) based on an air flow-assisted PbI2 blade coating deposition process10.1016/j.jpowsour.2014.12.008 ↗
17. Optimal geometric design of monolithic thin-film solar modules: architecture of polymer solar cells10.1016/j.solmat.2011.09.037 ↗
18. Rand · 2014
19. Patterning of organic photovoltaic modules by ultrafast laser
20. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
21. Obtaining the specific contact resistance from transmission line model measurements10.1109/EDL.1982.25502 ↗
22. Schroder · 1990
23. Contact resistance and contact resistivity10.1149/1.2404240 ↗
24. Four-terminal organic solar cell modules with increased annual energy yield10.1117/12.2024023 ↗
25. Fabrication of fully-spray-processed organic photovoltaic modules by using an automated process in air10.1002/ente.201300107 ↗
26. Absorptive carbon nanotube electrodes: consequences of optical interference loss in thin film solar cells10.1039/C5NR01119A ↗
27. Solution processed large area fabrication of Ag patterns as electrodes for flexible heaters, electrochromics and organic solar cells10.1039/c4ta00301b ↗
28. Digital fabrication of organic solar cells by Inkjet printing using non-halogenated solvents10.1016/j.solmat.2014.12.014 ↗
29. Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes10.1039/c2nr31508d ↗
30. Gravure printed flexible organic photovoltaic modules10.1016/j.solmat.2010.12.020 ↗
31. Surface treatment patterning of organic photovoltaic films for low-cost modules10.1016/j.orgel.2012.11.018 ↗
32. Uniform aerosol jet printed polymer lines with 30μm width for 140ppi resolution rgb organic light emitting diodes10.1016/j.orgel.2015.03.034 ↗
33. Metal aerosol jet printing for solar cell metallization10.1002/pip.759 ↗
34. Printable ion-gel gate dielectrics for low-voltage polymer thin-film transistors on plastic10.1038/nmat2291 ↗
35. Microelectronic engineering using single-walled carbon nanotube solution10.1016/j.mee.2009.05.034 ↗
36. Aerosol Jet printed grid for ITO-free inverted organic solar cells10.1016/j.solmat.2012.06.042 ↗
37. Preparation of active layers in polymer solar cells by Aerosol Jet printing10.1021/am200907k ↗
38. D. Keicher, Aerosol Jet Technology For Printing Electronics: Optomec Summary, 2011
39. Analytical methods for the extraction of solar-cell single- and double-diode model parameters from I–V characteristics10.1109/T-ED.1987.22920 ↗