0.4% absolute efficiency increase for inline-diffused screen-printed multicrystalline silicon wafer solar cells by non-acidic deep emitter etch-back
Source abstract
Abstract
Abstract Emitter formation is one of the most critical and crucial process steps in the fabrication of standard silicon wafer solar cells. Typically the photovoltaic industry uses tube based phosphorus diffusion, using phosphorus oxychloride as the dopant source. Alternately, a low-cost inline diffusion using phosphoric acid as a dopant source can be used. However, proper process conditions must be used to meet solar cell energy conversion efficiencies obtained by tube diffusion. In this work, we present the application of a non-acidic homogeneous emitter etch-back process – the ‘SERIS etch’ – for inline-diffused emitters in order to raise the efficiency of multicrystalline silicon (multi-Si) wafer solar cells. We apply both light and heavy emitter etch-backs on inline-diffused emitters with sheet resistance ( R sq ) values in the 40–60 Ω/sq range to achieve emitters with a target R sq of ~70 Ω/sq. The emitter surface reflectance and doping uniformity are maintained even after an etch-back that results in a R sq change of ~30 Ω/sq. An average cell efficiency gain of 0.4% (absolute) is reported for cells with heavy etch-back when compared to the as-diffused non-etch-back screen-printed full-area aluminum back surface field solar cells and efficiencies up to 17.9% are achieved. Besides, best lot of the etch-back inline-diffused cells shows a 0.2% (absolute) efficiency gain over the standard tube-diffused cells. These results show that the ‘SERIS etch’ etch-back process can enable higher-efficiency industrial inline-diffused multi-Si wafer solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. The low cost multicrystalline silicon solar cells10.1016/j.mseb.2009.08.009 ↗
2. A. Ebong, B. Rounsaville, I.B. Cooper, K. Tate, A. Upadhyaya, A. Rohatgi, B. Bunkenburg, J. Cathey, S. Kim, D. Ruf, Optimizing the in-line emitters for higher high efficiency silicon solar cells, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC), Hamburg (2009), pp. 1937–1940.
3. High efficiency in-line diffused emitter (ILDE) solar cells on mono-crystalline CZ silicon10.1002/pip.982 ↗
4. Methods of emitter formation for crystalline silicon solar cells
5. Characterization of the PSG/Si interface of H3PO4 doping process for solar cells10.1016/j.solmat.2011.06.042 ↗
6. J. Hoornstra, W. Van Strien, M. Lamers, K. Tool and A. Weeber, High throughput in-line diffusion: emitter and cell results, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC), Milan (2007) pp. 1586–1589.
7. 18.7% efficient inline-diffused screen-printed silicon wafer solar cells with deep homogeneous emitter etch-back10.1016/j.solmat.2013.06.046 ↗
8. P.J. Richter, F.J. Bottari, and D.C. Wong, PSG trapping of metal contaminants during belt furnace in-line phosphorous diffusion in crystalline Si wafers, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference (IEEE PVSC), Honolulu (2010), pp. 3593–3597.
9. J. Horzel, B. Schum, A. Lachowicz, J. Rossa, K. Vaas, M. Jahn, Y. Gassenbauer, H. Von Campe, H. Boubekeur, G. Blendin, U. Weber, A. Seidl, A. Armigliato, F. Seidel and T. Hantsche, On anomalous emitter regions forming during phosphorus diffusion processing of crystalline silicon solar cells, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference (EU PVSEC), Valencia (2010), pp. 1882–1891.
10. C. Voyer, D. Biro, K. Wagner, J. Benick and R. Preu, Fabrication of textured solar cells using sprayed phosphoric acid as the dopant source for the in-line diffusion, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference (EU PVSEC), Dresden (2006), pp. 1157–1160.
11. A.F. Stassen, M. Koppes, Y. Komatsu, A. Weeber, J. Hoogboom, J. Oosterholt, S. Ritmeijer and L. Groenewoud, Further improvements in surface modification of mc silicon solar cells: comparison of different post-PSG cleans suitable for in-line emitters, Proceedings of the 24th European Photovoltaic Solar Energy Conference (EU PVSEC), Hamburg (2009), pp. 1657–1659.
12. B. Rounsaville, A. Ebong, D.S. Kim, I.B. Cooper and A. Rohatgi, Tailoring the in-line diffused emitter (ILDE) profiles for high efficiency screen-printed silicon solar cells, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC), Valencia (2010), pp. 2408–2411.
13. A. Dastgheib-Shirazi, H. Haverkamp, B. Raabe, F. Book and G. Hahn, Selective emitter for industrial solar cell production: A wet chemical approach using a single side diffusion process, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference and Exhibition, Valencia (2008), pp. 1197–1199.
14. B. Raabe, F. Book, A. Dastgheib-Shirazi and G. Hahn, The development of etch-back processes for industrial silicon solar cells, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference and Exhibition/5th World Conference on Photovoltaic Energy Conversion, Valencia (2010), pp. 1174–1178.
15. Selective emitter using a screen printed etch barrier in crystalline silicon solar cell10.1186/1556-276X-7-410 ↗
16. Effect of porous Si and an etch-back process on the performance of a selective emitter solar cell10.1016/j.solmat.2012.10.009 ↗
17. H. Haverkamp, A. Shirazi, B. Raabe, F. Book and G. Hahn, Minimizing the electrical losses on the front side: development a selective emitter process from a single diffusion, in: Proceedings of the 33rd IEEE Photovoltaic Solar Energy Conference and Exhibition, San Diego (2008), pp. 430–433.10.1109/PVSC.2008.4922443 ↗
18. F. Book, S. Braun, A. Herguth, A. Dastgheib-Shirazi, B. Raabe and G. Hahn, The etchback selective emitter technology and its application to multicrystalline silicon, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference (IEEE PVSC), Honolulu (2010), pp. 1309-1314.
19. 19% efficient inline-diffused large-area screen-printed Al-LBSF silicon wafer solar cells10.1016/j.egypro.2012.07.091 ↗
20. P.K. Basu, M.B. Boreland, V. Shanmugam and D. Sarangi, Non-acidic isotropic etch-back method for silicon wafer solar cells, US Prov. Patent Appl. No. 61/644,730 (2012).
21. Novel selective emitter process using non-acidic etch-back for inline-diffused silicon wafer solar cells10.1016/j.renene.2013.11.062 ↗
22. Efficacy of phosphorous gettering and hydrogenation in multicrystalline silicon10.1109/JPHOTOV.2014.2322276 ↗
23. A fill factor loss analysis method for silicon wafer solar cells10.1109/JPHOTOV.2013.2270348 ↗
24. Series resistance effects on solar cell measurements10.1016/0365-1789(63)90063-8 ↗