journal article·2023-12Open access

Shingling meets perovskite-silicon heterojunction tandem solar cells

Veronika Nikitina, Christian Reichel, Denis Erath, Simon Kirner, Alexei Richter, Torsten Rößler, Angela De Rose, Achim Kraft, Holger Neuhaus

Abstract

The current work focuses on the question if shingling can be a suitable interconnection method for perovskite-silicon tandem (PVST) cells. Cell-to-module (CTM) analysis was conducted to investigate the effect of the number of the metallization fingers and cut size (1/4, 1/5, 1/6 and 1/7 of the original wafer) on the I–V characteristics of PVST shingle cells, defining an optimum number of fingers for each of the cut sizes. The simulation was based on M6 wafers with an edge length of 166 mm, showing that smaller cut size with more fingers exhibit lower current, but higher fill factor and efficiency. Furthermore, power gains and losses from cell to module depending on the shingle size were analyzed. The simulation was based on a module design with 10 strings in parallel and shingles of 1/4, 1/5 and 1/6 cut sizes. CTM analysis revealed that smaller shingle cut sizes result in higher module efficiencies due to their higher initial efficiency and optical gains from overlap. According to the performed simulations, assuming an initial cell efficiency of 25.0 % (1/6 cut with 95 fingers), a module efficiency of 23.4 % can be reached. In order to demonstrate the feasibility of shingle interconnection and full-format module integration of PVST cells, low-temperature silver metallization with a screen-printing approach was utilized on M6 precursors provided by Oxford PV. After metallization, cells were cut (166 mm × 33.2 mm) and interconnected into shingle strings with an automatic process. They were then integrated in glass-glass (GG) solar modules. The prototype modules exhibited no visual defects and demonstrated performance in line with the initial cell efficiency. The highest achieved module efficiency was 22.8 % based on the aperture area of 1.5 m2 and exhibited a power PMPP of 336.5 W. Throughout the whole prototype fabrication process, only commercially available materials and industrial manufacturing equipment was used. To conclude, shingling has been demonstrated as a viable interconnection approach for PVST cells. Simulation and prototype production confirmed the potential of shingle modules to achieve high efficiencies.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Perovskite Materials and Applications · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Photovoltaics reaching for the shockley–queisser limit10.1021/acsenergylett.0c01790 ↗
2. Fundamental efficiency limit of lead iodide perovskite solar cells10.1021/acs.jpclett.7b03054 ↗
3. Efficiency limit of perovskite/Si tandem solar cells10.1021/acsenergylett.6b00405 ↗
4. A 2-terminal perovskite/silicon multijunction solar cell enabled by a silicon tunnel junction10.1063/1.4914179 ↗
5. magazine · 2023
6. Oxford
7. Low-temperature metallization & interconnection for silicon heterojunction & perovskite silicon tandem solar cells
8. Roessler · 2022
9. Progress in shingle interconnection based on electrically conductive adhesives at Fraunhofer ISE
10. All set for efficient and reliable perovskite/silicon tandem photovoltaic modules?10.1002/solr.202270031 ↗
11. Electrode metallization for scaled perovskite/silicon tandem solar cells: challenges and opportunities10.1002/pip.3499 ↗
12. A comprehensive study of module layouts for silicon solar cells under partial shading10.1109/JPHOTOV.2022.3144635 ↗
13. Design of shading‐ and hotspot‐resistant shingled modules10.1002/pip.3507 ↗
14. Stability challenges for the commercialization of perovskite–silicon tandem solar cells10.1038/s41578-022-00521-1 ↗
15. Methodology of energy yield modelling of perovskite-based multi-junction photovoltaics10.1364/OE.27.00A507 ↗
16. Analytical modeling of industrial-related silicon solar cells10.1109/JPHOTOV.2013.2281105 ↗
17. Shabanzadeh · 2022
18. Optimized front TCO and metal grid electrode for module‐integrated perovskite–silicon tandem solar cells10.1002/pip.3491 ↗
19. TOPCon shingle solar cells: thermal laser separation and passivated edge technology10.1002/pip.3680 ↗
20. Printing technologies for silicon solar cell metallization: a comprehensive review10.1002/pip.3674 ↗
21. Cell-to-module analysis beyond standard test conditions
22. Unified methodology for determining CTM ratios: systematic prediction of module power10.1016/j.solmat.2014.06.025 ↗
23. Monolithic perovskite-silicon tandem solar cells: from the lab to fab?10.1002/adma.202106540 ↗
24. Low-temperature screen-printed metallization for the scale-up of two-terminal perovskite–silicon tandems10.1021/acsaem.9b00502 ↗
25. Application of SHJ and TOPCon shingle cells in full format and integrated modules