journal article·2023-08

24.18% efficiency TOPCon solar cells enabled by super hydrophilic carbon-doped polysilicon films combined with plated metal fingers

Haojiang Du, Taiqiang Wang, Wei Liu, Yali Ou, Mengchao Xing, Weiguang Yang, Jiang Sheng, Mingdun Liao, Zhijie Gu, Baojie Yan, Zhenhai Yang, Yuheng Zeng, Jichun Ye

Publisher page

Abstract

Electroplating technology which has the potential of reducing silver consumption and lowering fabrication costs has been widely used in the photovoltaic (PV) devices. However, the poor wettability of the polysilicon film limits the application of the electroplating technology on tunnel oxide passivated contact (TOPCon) solar cells (SCs). In this work, we propose a carbon (C)-doped polysilicon with highly polar C–Si bonds to improve the surface wettability of polysilicon film. By reducing the hydrogen bubble retention during plating, a uniform, dense, and void-free Ni seed layer can be obtained. To maintain the good conductivity of polysilicon, a double-layer polysilicon structure consisting of a C-doped and a C-free polysilicon films was constructed for TOPCon device fabrication. The new design shows an excellent passivation quality with an implied open-circuit voltage ( iV oc) of 745 mV for the lifetime sample and a good contact performance with a low contact resistivity ( ρ c) of 2–3 mΩ cm 2 between plated grids and polysilicon films. Finally, the proof-of-concept TOPCon devices with the double-layer polysilicon structure and plated metal electrodes deliver a remarkable power conversion efficiency (PCE) of 24.18%. Therefore, the C-doped polysilicon combined with the electroplating technology demonstrated in this work shows great potential to obtain high-efficiency and low-cost TOPCon SCs in the PV industry.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and devices · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. High-efficiency crystalline silicon solar cells: status and perspectives10.1039/C5EE03380B ↗
2. Passivating contacts for crystalline silicon solar cells10.1038/s41560-019-0463-6 ↗
3. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
4. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
5. Mass production of industrial tunnel oxide passivated contacts (i‐TOPCon) silicon solar cells with average efficiency over 23% and modules over 345 W10.1002/pip.3180 ↗
6. 24.4% industrial tunnel oxide passivated contact solar cells with ozone-gas oxidation Nano SiOx and tube PECVD prepared in-situ doped polysilicon10.1016/j.solmat.2022.111803 ↗
7. On the chances and challenges of combining electroncollecting nPOLO and hole-collecting Al-p+ contacts in highly efficient p-type c-Si solar cells10.1002/pip.3545 ↗
8. Industrially viable diffused IBC solar cells using APCVD dopant glass layers10.1016/j.solmat.2022.112111 ↗
9. Design considerations for multi-terawatt scale manufacturing of existing and future photovoltaic technologies: challenges and opportunities related to silver, indium and bismuth consumption10.1039/D1EE01814K ↗
10. Laser ablation and Ni/Cu plating approach for tunnel oxide passivated contacts solar cells with variate polysilicon layer thickness: gains and possibilities in comparison to screen printing10.1002/pssa.202000474 ↗
11. Direct contact electroplating sequence without initial seed layer for bifacial TOPCon solar cell metallization10.1109/JPHOTOV.2021.3051636 ↗
12. Progress of plated metallization for industrial bifacial TOPCon silicon solar cells10.1002/pip.3528 ↗
13. Enabling savings in silver consumption and poly-Si thickness by integration of plated Ni/Cu/Ag contacts for bifacial TOPCon solar cells10.1016/j.solmat.2022.111889 ↗
14. Plated TOPCon solar cells & modules with reliable fracture stress and soldered module interconnection10.1051/epjpv/2021010 ↗
15. Metal contact recombination in monoPoly™ solar cells with screen-printed & fire-through contacts10.1016/j.solmat.2018.12.026 ↗
16. Characterization of screen printed and fire-through contacts on LPCVD based passivating contacts in monoPoly™ solar cells10.1016/j.solener.2020.03.087 ↗
17. Markus Fischer · 2021
18. Plated NI/CU/ag for topcon solar cell metallization
19. On the recombination behavior of p+-type polysilicon on oxide junctions deposited by different methods on textured and planar surfaces10.1002/pssa.201700058 ↗
20. Influence of silicon substrate surface finish on the screen‐printed silver metallization of polysilicon‐based passivating contacts10.1002/pssa.202100869 ↗
21. Study of surface treatment processes for improvement in the wettability of silicon-based materials used in high aspect ratio through-via copper electroplating10.1016/j.apsusc.2007.04.067 ↗
22. Improved contact quality for silver-free silicon heterojunction solar cells by phosphoric acid treatment10.1016/j.solener.2023.01.048 ↗
23. Electrochemistry - building on bubbles in metal electrodeposition10.1038/417139a ↗
24. A strong-oxidizing mixed acid derived high-quality silicon oxide tunneling layer for polysilicon passivated contact silicon solar cell10.1016/j.solmat.2018.09.001 ↗
25. Improvement of surface passivation of tunnel oxide passivated contact structure by thermal annealing in mixture of water vapor and nitrogen environment10.1002/solr.201900105 ↗
26. Contact resistance and contact resistivity10.1149/1.2404240 ↗
27. Dual-functional carbon-doped polysilicon films for passivating contact solar cells: regulating physical contacts while promoting photoelectrical properties10.1039/D1EE02011K ↗
28. Effects of carbon impurities on the performance of silicon as an anode material for lithium ion batteries: an ab initio study10.1063/5.0079945 ↗
29. Blistering-free polycrystalline silicon carbide films for double-sided passivating contact solar cells10.1016/j.solmat.2022.111586 ↗
30. Polysilicon contact structures for silicon solar cells using atomic layer deposited oxides and nitrides as ultra‐thin dielectric interlayers10.1002/pip.3485 ↗
31. Influence of the carbon concentration on (p) poly-SiCx layer properties with focus on parasitic absorption in front side poly-SiCx/SiOx passivating contacts of solar cells10.1109/JPHOTOV.2020.3023506 ↗
32. Phosphorous-doped silicon carbide as front-side full-area passivating contact for double-side contacted c-Si solar cells10.1109/JPHOTOV.2018.2886234 ↗
33. Interplay of annealing temperature and doping in hole selective rear contacts based on silicon-rich silicon-carbide thin films10.1016/j.solmat.2017.06.039 ↗
34. Silicon-Rich silicon carbide hole-selective rear contacts for crystalline-silicon-based solar cells10.1021/acsami.6b12714 ↗
35. Monolithic perovskite/black-silicon tandems based on tunnel oxide passivated contacts10.1016/j.joule.2022.09.006 ↗
36. Balancing charge‐carrier transport and recombination for perovskite/TOPCon tandem solar cells with double‐textured structures
37. Application of polycrystalline silicon carbide thin films as the passivating contacts for silicon solar cells10.1016/j.solmat.2019.110329 ↗
38. Passivating contact with phosphorus‐doped polycrystalline silicon‐nitride with an excellent implied open‐circuit voltage of 745 mV and its application in 23.88% efficiency TOPCon solar cells10.1002/solr.202100644 ↗