journal article·2022-05

Improving the properties of MA-based wide-bandgap perovskite by simple precursor salts engineering for efficiency and ambient stability improvement in solar cells

Jadel Tsiba Matondo, Maurice Davy Malouangou, Luyun Bai, Yifan Yang, Yujing Zhang, Manala Tabu Mbumba, Muhammad Waleed Akram, Mina Guli

Publisher page

Abstract

The morphology and optoelectronic properties of wide-bandgap halide perovskites have profound influence on the performance of tandem solar cells in which these materials hold a great potential to push the efficiency beyond the maximum in single junction devices. Typically, alkali metals such as Cs + are employed to overcome photo-instability in mixed-halide hybrid perovskites. However, while using the popular CsI in precursor solutions, small grain size (~250 nm) along with high densities of grain boundaries and their associated trap states are usually observed in polycrystalline films, leading to low photovoltaic performance. Here, we develop a non-stoichiometric one-step solution casting method to prepare wide-bandgap Cs XMA 1-XPb(I 0 · 6Br 0.4) 3 films with reduced grain boundaries and high crystallinity using CsCl which plays a double role of Cs + source and crystallization controller. The resulting films exhibit improved carrier lifetime and mobility, and reduced carrier trap states. Elemental analysis revealed that some Cl ions remains in the final films, passivating the defect states. All these benefits led to high open circuit voltages and improved the power conversion efficiency (PCE) of Cs 0.1MA 0.9Pb(I 0 · 6Br 0.4) 3 perovskite solar cells from 13.20% to 15.16%. Moreover, the developed method is also found to enhance the hydrophobicity and moisture resistance of Cs XMA 1-XPb(I 0 · 6Br 0.4) 3 films, which enabled the improvement in the device ambient stability.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Solid-state spectroscopy and crystallography

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Organometallic halide perovskites: sharp optical absorption edge and its relation to photovoltaic performance10.1021/jz500279b ↗
2. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
3. Unusual defect physics in CH 3 NH 3 PbI 3 perovskite solar cell absorber10.1063/1.4864778 ↗
4. Charge carrier lifetimes exceeding 15 μs in methylammonium lead iodide single crystals10.1021/acs.jpclett.6b00269 ↗
5. What remains unexplained about the properties of halide perovskites?10.1002/adma.201800691 ↗
6. Origin rate in metal halide perovskitesigin of low electron-hole recombin10.1039/C7EE01981E ↗
7. Microstructures of organometal trihalide perovskites for solar cells: their evolution from solutions and characterization10.1021/acs.jpclett.5b01843 ↗
8. Synthetic approaches for halide perovskite thin films10.1021/acs.chemrev.8b00318 ↗
9. Methodologies toward highly efficient perovskite solar cells
10. A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells10.1002/anie.201405334 ↗
11. Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells10.1038/nmat4014 ↗
12. Higly reproducible perovskite solar cells with average efficiency of 18.3% and best efficiency of 19.7% fabricated via lewis baseh adduct of lead(II) iodide10.1021/jacs.5b04930 ↗
13. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
14. Cesium lead halide perovskites with improved stability for tandem solar cells10.1021/acs.jpclett.6b00002 ↗
15. A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells10.1126/science.aad5845 ↗
16. Tailoring in situ healing and stabilizing post-treatment agent for high-performance inverted CsPbI3Perovskite solar cells with efficiency of 16.6710.1021/acsenergylett.0c01728 ↗
17. Dual-protection strategy for high-efficiency and stable CsPbI 2 Br inorganic perovskite solar cells10.1021/acsenergylett.9b02716 ↗
18. Perovskite-perovskite tandem photovoltaics with optimized band gaps
19. Thermodynamically stabilized b-CsPbI3–based perovskite solar cells with efficiencies >18%10.1126/science.aav8680 ↗
20. Opportunities and challenges for tandem solar cells using metal halide perovskite semiconductors10.1038/s41560-018-0190-4 ↗
21. Highly efficient perovskite–perovskite tandem solar cells reaching 80% of the theoretical limit in photovoltage10.1002/adma.201702140 ↗
22. Achieving a high open-circuit voltage in inverted wide-bandgap perovskite solar cells with a graded perovskite homojunction10.1016/j.nanoen.2019.04.069 ↗
23. A 2-terminal perovskite/silicon multijunction solar cell enabled by a silicon tunnel junction10.1063/1.4914179 ↗
24. Dipolar cations confer defect tolerance in wide-bandgap metal halide perovskites10.1038/s41467-018-05531-8 ↗
25. The role of potassium in the segregation of MAPb(Br0.6I0.4)3 mixed-halide perovskite in different environments10.1002/pssr.202000335 ↗
26. Homogenized halides and alkali cation segregation in alloyed organic-inorganic perovskites10.1126/science.aah5065 ↗
27. Room-temperature formation of highly crystalline multication perovskites for efficient, low-cost solar cells10.1002/adma.201606258 ↗
28. Improving the performance of formamidinium and cesium lead triiodide perovskite solar cells using lead thiocyanate additives10.1002/cssc.201601027 ↗
29. Insights about the absence of Rb cation from the 3D perovskite lattice: effect on the structural, morphological, and photophysical properties and photovoltaic performance10.1002/smll.201802033 ↗
30. Tailoring the grain boundaries of wide-bandgap perovskite solar cells by molecular engineering10.1002/solr.202000384 ↗
31. FA-assistant iodide coordination in organic–inorganic wide-bandgap perovskite with mixed halides10.1002/smll.201907226 ↗
32. How lead halide complex chemistry dictates the composition of mixed halide perovskites10.1021/acs.jpclett.6b00433 ↗
33. Perovskite solar cells with a DMSO-treated PEDOT:PSS hole transport layer exhibit higher photovoltaic performance and enhanced durability10.1039/C6NR08375G ↗
34. Synergistic effect of pseudo-halide thiocyanate anion and cesium cation on realizing high-performance pinhole-free MA-based wide-band gap perovskites10.1021/acsami.9b06315 ↗
35. Revealing the crystallization process and realizing uniform 1.8 eV MA-based wide-bandgap mixed-halide perovskites via solution engineering10.1007/s12274-019-2336-5 ↗
36. Manipulating crystallization of organolead mixed-halide thin films in antisolvent baths for wide-bandgap perovskite solar cells10.1021/acsami.5b10987 ↗
37. How contact layers control shunting losses from pinholes in thin-film solar cells10.1021/acs.jpcc.8b09400 ↗
38. Soldering grain boundaries yields inverted perovskite solar cells with enhanced open-circuit voltages10.1002/admi.201900474 ↗
39. Chlorine doping for black γ-CsPbI 3 solar cells with stabilized efficiency beyond 16%10.1016/j.nanoen.2019.01.034 ↗
40. J. Ma, M. Qin, Y. Wu, G. Fang, X. Lu, J. Ma, M. Qin, Y. Li, X. Wu, Z. Qin, Y. Wu, G. Fang, Article Unraveling the Impact of Halide Mixing on Crystallization and Phase Evolution in CsPbX 3 Perovskite Solar Cells Unraveling the Impact of Halide Mixing on Crystallization and Phase Evolution in CsPbX 3 Perovskite Solar Cells, Matter. 4 (n.d.) 313–327. https://doi.org/10.1016/j.matt.2020.10.023.10.1016/j.matt.2020.10.023 ↗
41. Cesium-doped methylammonium lead iodide perovskite light absorber for hybrid solar cells10.1016/j.nanoen.2014.04.017 ↗
42. Structural, optical and excitonic properties of MAxCs1-xPb(IxBr1-x)3 alloy thin films and their application in solar cells10.1016/j.solmat.2020.110478 ↗
43. Regulation of interfacial charge transfer and recombination for efficient planar perovskite solar cells10.1002/solr.201900198 ↗
44. Structurally reinforced all‐inorganic CsPbI 2 Br perovskite by nonionic polymer via coordination and hydrogen bonds10.1002/solr.202000216 ↗
45. MACl-induced intermediate engineering for high-performance mixed-cation perovskite solar cells10.1021/acsami.9b22719 ↗
46. Origin of high electronic quality in structurally disordered CH 3 NH 3 PbI 3 and the passivation effect of Cl and O at grain boundaries10.1002/aelm.201500044 ↗
47. Lead acetate (PbAc2)-derived and chloride-doped MAPbI 3 solar cells with high fill factor resulting from optimized charge transport and trap state properties10.1016/j.solener.2021.09.010 ↗
48. How methylammonium cations and chlorine dopants heal defects in lead iodide perovskites10.1002/aenm.201702754 ↗
49. CH3NH3Pb1-: XEuxI3 mixed halide perovskite for hybrid solar cells: the impact of divalent europium doping on efficiency and stability10.1039/C7RA12754E ↗
50. Bilayer SnO 2 as electron transport layer for highly efficient perovskite solar cells10.1021/acsaem.8b01076 ↗
51. Enhancing air-stability and reproducibility of lead-free formamidinium-based tin perovskite solar cell by chlorine doping10.1016/j.solmat.2021.111072 ↗
52. A solution-processed bathocuproine cathode interfacial layer for high-performance bromine-iodine perovskite solar cells10.1039/C5CP03995A ↗
53. Understanding the role of the electron-transport layer in highly efficient planar perovskite solar cells10.1002/cphc.201601245 ↗
54. Suppression of atomic vacancies via incorporation of isovalent small ions to increase the stability of halide perovskite solar cells in ambient air10.1038/s41560-018-0192-2 ↗
55. Scaling behavior of moisture-induced grain degradation in polycrystalline hybrid perovskite thin films10.1039/C6EE02941H ↗
56. Effect of alkaline earth metal chloride additives BCl2(B = Mg, Ca, Sr and Ba) on the photovoltaic performance of FAPbI3based perovskite solar cells10.1039/D0NH00263A ↗
57. Methylammonium chloride as an interface modificator for planar-structure perovskite solar cells with a high open circuit voltage of 1.19V10.1016/j.jpowsour.2020.229073 ↗