journal article·2017-03Open access

Easy and low-cost aqueous precipitation method to obtain Cu2ZnSn(S, Se)4 thin layers

Rafael Martí Valls, Teodora Stoyanova Lyubenova, Ivan Calvet Roures, Leonardo Oliveira, Diego Fraga Chiva, Juan B. Carda Castelló

Abstract

Abstract An easy method to obtain kesterite Cu2ZnSn(Se1−x,Sx)4 (CZTSSe) thin films as absorbers for photovoltaic solar cells is discussed in this report. Particular emphasis is directed towards preparation steps of CZTSSe, as well as its crystal structure and properties. The CZTSSe has been developed by a low-cost and sustainable aqueous precipitation method that included metal selenite´s precipitation, its reduction to metal selenides and further crystallization of kesterite. The use of an aqueous solution instead of organic compounds and sulfurization process at atmospheric conditions makes this process attractive for large-scale industrial fabrication of CZTSSe thin film solar cells. The kesterite CZTSSe solid solution has been characterized in terms of its chemical composition, structural and morphological transformations and optical and electrical properties, confirming the viability and effectiveness of the applied process. The optimal electrical parameters were found to be: 21.5 mA/cm2 short circuit current (Jsc), 532 mV open circuit voltage (Voc), 42.8% fill factor (FF) and total area efficiency of 4.9% (Eff) without antireflection coating.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Improved photocurrent in Cu(In,Ga)Se2 solar cells: from 20.8% to 21.7%. efficiency with CdS buffer and 21.0% Cd-free10.1109/JPHOTOV.2015.2458039 ↗
2. Materials challenges for CdTe and CuInSe2 photovoltaics10.1557/mrs2007.26 ↗
3. Band alignment at the Cu2ZnSn(SxSe1−x)4/CdS interface10.1063/1.3600776 ↗
4. On the Sn loss from thin films of the material system Cu–Zn–Sn–S in high vacuum10.1063/1.3273495 ↗
5. Inhibiting the absorber/Mo-back contact decomposition reaction in Cu2ZnSnSe4 solar cells: the role of a ZnO intermediate nanolayer10.1039/c3ta11419h ↗
6. Thermodynamic aspects of the synthesis of thin-film materials for solar cells10.1002/cphc.201200067 ↗
7. In-depth resolved Raman scattering analysis for the identification of secondary phases: characterization of Cu2ZnSnS4 layers for solar cell applications10.1063/1.3587614 ↗
8. Determination of secondary phases in kesterite Cu2ZnSnS4 thin films by x-ray absorption near edge structure analysis10.1063/1.3671994 ↗
9. High-Efficiency Solar Cell with Earth-Abundant Liquid-Processed Absorber10.1002/adma.200904155 ↗
10. Device Characteristics of CZTSSe Thin-Film Solar Cells with 12.6% Efficiency10.1002/aenm.201301465 ↗
11. Earth-abundant non-toxic Cu2ZnSnS4 thin films by direct liquid coating from metal–thiourea precursor solution10.1016/j.solmat.2012.02.012 ↗
12. Solution route to efficient Cu2ZnSn(S,Se)4 thin-film solar cells10.1021/cm504654t ↗
13. Novel non-hydrazine solution processing of earth-abundant Cu2ZnSn(S,Se)4 absorbers for thin-film solar cells10.1039/c3ta10566k ↗
14. Earth-abundant element photovoltaics directly from soluble precursors with high yield using a non-toxic solvent10.1002/aenm.201100140 ↗
15. Solution-based preparation of CZTSSe for solar cells-comparison of SnSe2 and elemental Se as chalcogen source10.1109/JPHOTOV.2015.2392935 ↗
16. Cu2ZnSn(S1–xSex)4 thin film solar cells prepared by water-based solution process10.1002/pssr.201308215 ↗
17. Síntesis de kesterita Cu2ZnSn (S, Se) 4 mediante métodos de hot-injection y solvotermal10.3989/cyv.312014 ↗
18. Hot-injection synthesis and characterization of quaternary Cu2ZnSnSe4 nanocrystals10.1016/j.matlet.2010.03.034 ↗
19. Solution-based synthesis and characterization of Cu2ZnSnS4 nanocrystals10.1021/ja9044168 ↗
20. Synthesis and characterization of copper zinc tin chalcogenide nanoparticles: influence of reactants on the chemical composition10.1016/j.solmat.2012.02.025 ↗
21. Fabrication of 7.2% efficient CZTSSe solar cells using CZTS nanocrystals10.1021/ja108427b ↗
22. 9.0% efficient Cu2ZnSn(S,Se)4 solar cells from selenized nanoparticle inks10.1002/pip.2472 ↗
23. A mild solvothermal route to kesterite quaternary Cu2ZnSnS4 nanoparticles10.1016/j.jcrysgro.2010.10.071 ↗
24. D. Fraga, R. Marti, T. Lyubenova, L. Oliveira, A. Rey, S. Kozhukharov, J. Carda, Solvothermal synthesis of CZTSSe for photovoltaic technology, Annual Proceedings of Angel Kanchev University of Ruse (Bulgaria), 51 (46–49, 2012.
25. Fabrication of Cu2ZnSnS4 screen printed layers for solar cells10.1016/j.solmat.2010.06.010 ↗
26. Quaternary Cu2ZnSnS4 nanocrystals: facile and low cost synthesis by microwave-assisted solution method10.1016/j.jallcom.2011.11.143 ↗
27. Noninjection synthesis and characterization of Cu2ZnSnSe4 nanocrystals in triethanolamine reaction media10.1016/j.matlet.2011.04.106 ↗
28. Fine-tuning the Sn content in CZTSSe thin films to achieve 10.8% solar cell efficiency from spray-deposited water–ethanol-based colloidal inks10.1002/aenm.201501404 ↗
29. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
30. An alternative route towards low-cost Cu2ZnSnS4 thin film solar cells10.1016/j.surfcoat.2013.04.052 ↗
31. Green synthesis of nanocrystalline Cu2ZnSnS4 powder using hydrothermal route10.1155/2013/685836 ↗
32. Hydrazine-free surface modification of CZTSe nanocrystals with all-inorganic ligand10.1021/jp510558b ↗
33. Development of CZTS-based thin film solar cells10.1016/j.tsf.2008.11.002 ↗
34. Cu2ZnSnS4 thin film solar cells from electroplated precursors: novel low-cost perspective10.1016/j.tsf.2008.11.061 ↗
35. Effect of sodium diffusion on the structural and electrical properties of Cu2ZnSnS4 thin films10.1016/j.solmat.2010.12.012 ↗
36. On the formation mechanisms of Zn-rich Cu2ZnSnS4 films prepared by sulfurization of metallic stacks10.1016/j.solmat.2013.01.015 ↗
37. Impact of Sn(S,Se) secondary phases in Cu2ZnSn(S,Se)4 solar cells: a chemical route for their selective removal and absorber surface passivation10.1021/am502609c ↗
38. Preparation of Cu(In,Ga)Se2 photovoltaic absorbers by an aqueous metal selenite co-precipitation route10.1016/j.jallcom.2015.08.014 ↗
39. J.B. Cardá, P. Escribano, T.K. Todorov, D. Lincot, E. Chassaing, Inks for the In-situ Production of Chalcogens And/or Chalcogenides That Form Semiconductor Layers, Production Method Thereof and Use of Same, in, Google Patents, 2015.
40. Zhou · 2007
41. Sakka · 2005
42. Handbook of X-Ray Photoelectron Spectroscopy
43. Interface effects for Cu, CuO, and Cu2O deposited on SiO2 and ZrO2. XPS determination of the valence state of copper in Cu/SiO2 and Cu/ZrO2 catalysts10.1021/jp014618m ↗
44. F. Nishida, T. Yamada, N. Suzuki, T. Takeda, T. Yanagihara, K. Adachi, T. Asanabe, K.Ohsato, K.Tsuda, Process for Removal of Nitrogen Oxides from Waste Gas, in, Google Patents, 1978.
45. The catalytic oxidation of ammonia: influence of water and sulfur on selectivity to nitrogen over promoted copper oxide/alumina catalysts10.1016/S0920-5861(99)00238-2 ↗
46. Synthesis of Selenides and Tellurides. I. The reduction of selenites by hydrazine10.1021/ja01544a015 ↗
47. J.J. Lin, Y.H. Wu, Method for Producing Complex of Metallic Nanoparticle and Inorganic Clay and Ethanolamine Promoter, in, Google Patents, 2012.
48. One-step electrodeposited CuInSe2 thin films studied by Raman spectroscopy10.1016/j.tsf.2007.02.109 ↗
49. Secondary phase formation in Zn-rich Cu2ZnSnSe4-based solar cells annealed in low pressure and temperature conditions10.1002/pip.2473 ↗
50. Study of polycrystalline Cu2ZnSnS4 films by Raman scattering10.1016/j.jallcom.2011.04.097 ↗
51. Dependence of copper concentration on the properties of Cu2ZnSnS4 thin films prepared by electrochemical method10.1016/S1452-3981(23)14026-0 ↗
52. X. Fontane, Caracterización por espectroscopía Raman de semiconductores Cu2ZnSnS4 para nuevas tecnología fotovoltaicas in, Universidad de Barcelona, España, 2013.
53. Growth and Raman scattering characterization of Cu2ZnSnS4 thin films10.1016/j.tsf.2008.11.031 ↗
54. The role of secondary phase precipitation on grain boundary electrical activity in Cu2ZnSnS4 (CZTS) photovoltaic absorber layer material10.1063/1.4769738 ↗
55. Recent trends in direct solution coating of kesterite absorber layers in solar cells10.1016/j.solmat.2013.06.038 ↗
56. Vacuum-free preparation of 7.5% efficient Cu2ZnSn(S,Se)4 solar cells based on metal salt precursors10.1016/j.solmat.2013.06.021 ↗
57. Novel solution processing of high-efficiency earth-abundant Cu2ZnSn(S,Se)4 solar cells10.1002/adma.201201785 ↗
58. Compositional dependence of structural and electronic properties of Cu 2 ZnSn (S, Se) 4 alloys for thin film solar cells10.1103/PhysRevB.83.125201 ↗
59. The role of nanoparticle inks in determining the performance of solution processed Cu2ZnSn(S,Se)4 thin film solar cells10.1002/pip.2756 ↗
60. Electrodeposited Cu2ZnSnSe4 thin film solar cell with 7% power conversion efficiency10.1002/pip.2332 ↗
61. 8% efficient Cu2ZnSn(S,Se)4 solar cells from redox equilibrated simple precursors in DMSO10.1002/aenm.201301823 ↗
62. 8.3% efficient Cu2ZnSn(S,Se)4 solar cells processed from sodium-containing solution precursors in a closed reactor10.1016/j.tsf.2014.10.043 ↗
63. Characterization of defects in 9.7% efficient Cu2ZnSnSe4-CdS-ZnO solar cells10.1063/1.4826448 ↗
64. Control of an interfacial MoSe2 layer in Cu2ZnSnSe4 thin film solar cells: 8.9% power conversion efficiency with a TiN diffusion barrier10.1063/1.4740276 ↗
65. Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4 absorber10.1002/pip.1174 ↗