Stoichiometric dependence of TiOx as a cathode modifier on band alignment of polymer solar cells
Source abstract
Abstract
Abstract In this study, we systematically investigated the stoichiometric dependence of titanium oxide (TiOx, x=1.56–1.93) as a cathode modifier on the device performance of polymer solar cells. Electronic structures of the synthesized TiOx modifier layers were controlled by tuning the compositions of various O/Ti ratios. The effective cathode work-functions and the corresponding device performances of polymer solar cells are systematically changed as a result of inserting the TiOx modification layers. Interfacial modification of the Al cathode with a low O/Ti ratio of TiOx layer yields the best performing photovoltaic device as a result of a largest built-in potential. The correlation of power conversion efficiencies and carrier dynamics of these devices by inserting various TiOx modification layer is further examined by using the Mott-Schottky analysis and the impedance spectroscopy technique. The consistent result shows an enhanced carrier collection efficiency and a reduced charge recombination rate of the device via adequate band alignment between the photoactive layer and the cathode using the TiOx modification layer with an optimized O/Ti ratio.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Silicon solar Cells10.1002/(SICI)1099-159X(199601/02)4:1<3::AID-PIP117>3.0.CO;2-S ↗
2. Solution-processed small-molecule solar cells with 6.7% efficiency10.1038/nmat3160 ↗
3. High-efficiency amorphous silicon solar cell on a periodic nanocone back reflector10.1002/aenm.201100514 ↗
4. Analysis of the series resistance in pin-type thin-film silicon solar cells10.1063/1.4798393 ↗
5. Organic small molecule solar cells with a homogeneously mixed copper phthalocyanine: C60 active layer10.1063/1.1755833 ↗
6. Hybrid nanorod-polymer solar cells10.1126/science.1069156 ↗
7. Synthesis, characterization, and photovoltaic properties of a low band gap polymer based on silole-containing polythiophenes and 2,1,3-benzothiadiazole10.1021/ja806687u ↗
8. Outlook brightens for plastic solar cells10.1126/science.332.6027.293 ↗
9. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
10. Efficient tandem polymer solar cells fabricated by all-solution rocessing10.1126/science.1141711 ↗
11. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
12. Exciton diffusion measurements in Poly (3-hexylthiophene)10.1002/adma.200800982 ↗
13. Conjugated polymer nanostructures for organic solar cell applications10.1039/c1py00275a ↗
14. Atomic-scale interfacial band mapping across vertically phased-separated polymer/fullerene hybrid solar cells10.1021/nl400091f ↗
15. Small molecule organic semiconductors on the move: promises for future solar energy technology10.1002/anie.201102326 ↗
16. Poly(3,4-ethylenedioxythiophene) and its derivatives: past, present, and future10.1002/(SICI)1521-4095(200004)12:7<481::AID-ADMA481>3.0.CO;2-C ↗
17. Enhancing the stability of polymer solar cells by improving the conductivity of the nanostructured MoO3 hole-transport layer10.1039/c3cp50994j ↗
18. Low-temperature, solution-processed, layered V2O5 hydrate as the hole-transport layer for stable organic solar cells10.1039/c3ee42204f ↗
19. Solution-processable graphene oxide as an efficient hole transport layer in polymer solar cells10.1021/nn100551j ↗
20. Optimized inverted polymer solar cells incorporating Cs2CO3-doped C60 as electron transport layer10.1063/1.4807388 ↗
21. Inverted polymer solar cells integrated with a low‐temperature‐annealed sol–gel‐derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
22. Efficacy of TiOx optical spacer in bulk-heterojunction solar cells processed with 1,8-octanedithiol10.1063/1.2937844 ↗
23. New architecture for high‐efficiency polymer photovoltaic cells using solution‐based titanium oxide as an optical spacer10.1002/adma.200501825 ↗
24. High performance polythiophene/fullerene bulk-heterojunction solar cell with a TiOx hole blocking layer10.1063/1.2730746 ↗
25. Enhanced diode characteristics of organic solar cells using titanium suboxide electron transport layer10.1063/1.3409116 ↗
26. Self-encapsulated doping of n-type graphene transistors with extended air stability10.1021/nn301639j ↗
27. Sol–gel synthesis and hydrothermal processing of anatase and rutile titania nanocrystals10.1021/cm990180f ↗
28. Sol–gel synthesis of heterogeneous catalysts from aqueous solutions10.1016/S0920-5861(98)00034-0 ↗
29. Lithium intercalation in nanoporous anatase TiO2 studied with XPS10.1021/jp9639399 ↗
30. The adsorption of liquid and vapor water on TiO2 (110) surfaces: the role of defects10.1016/0039-6028(95)00859-4 ↗
31. Intrinsically formed trivalent titanium ions in sol-gel titania10.1111/j.1151-2916.2001.tb00667.x ↗
32. Porous titania with heavily self-doped Ti3+ for specific sensing of CO at room temperature10.1021/ic400109j ↗
33. Optical properties and electronic structure of amorphous Ge and Si10.1016/0025-5408(68)90023-8 ↗
34. Flexible large area polymer solar cells based on poly (3-hexylthiophene)/fullerene
35. Effect of P3HT:PCBM concentration in solvent on performances of organic solar cells10.1016/j.solmat.2009.01.019 ↗
36. D.A. Neamen, Semiconductor physics and device, isbn:0071198628.
37. Unusual electromechanical effects in organic semiconductor Schottky contacts: between piezoelectricity and electrostriction
38. Biased internal potential distributions in a bulk-heterojunction organic solar cell incorporated with a TiOx interlayer10.1063/1.4722802 ↗
39. Impendence spectroscopy on organic bulk-heterojunction solar cells10.1002/pssa.200521149 ↗
40. Origin of the open circuit voltage of plastic solar cells10.1002/1616-3028(200110)11:5<374::AID-ADFM374>3.0.CO;2-W ↗
41. Cathode dependence of the open-circuit voltage of polymer: fullerene bulk heterojunction solar cells10.1063/1.1620683 ↗
42. Charge carrier mobility and lifetime of organic bulk heterojunctions analyzed by impedance spectroscopy10.1016/j.orgel.2008.06.007 ↗