journal article·2020-07

Glass rod-sliding and low pressure assisted solution processing composition engineering for high-efficiency perovskite solar cells

Duo Wang, Cuncun Wu, Wei Luo, Xuan Guo, Xin Qi, Yuqing Zhang, Zehao Zhang, Bo Qu, Lixin Xiao, Zhijian Chen

Publisher page

Abstract

Abstract High-efficiency perovskite solar cells (PSCs) have experienced rapid development and attracted significant attention in recent years. The PSCs based on doctor bladed or slot-die coated perovskite films usually have lower power conversion efficiency (PCE) than that based on spin-coated perovskite films. In this work, we have developed an effective method, called glass rod-sliding and low pressure assisted solution processing composition engineering (GRS-LPASP), to manufacture high quality perovskite film in air. GRS-LPASP composition engineering effectively increases the grain size and thickness of perovskite films and reduces the defect density by increasing the contact area between the perovskite layer and the hole transport layer, thus leading an increased current density (Jsc) of perovskite solar cells. The device with GRS-LPASP composition engineering achieves a maximum PCE of 19.78%. The experimental results demonstrates that GRS-LPASP composition engineering is a feasible method to prepare high-efficiency PSCs. Moreover, GRS-LPASP composition engineering also provides a potential approach for the commercial production of PSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
3. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites
4. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
5. Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells10.1038/nmat4014 ↗
6. Compositional engineering of perovskite materials for high-performance solar cells10.1038/nature14133 ↗
7. Organometallic halide perovskites: sharp optical absorption edge and its relation to photovoltaic performance10.1021/jz500279b ↗
8. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
9. Long-range balanced electron- and hole-transport lengths in organic-inorganic CH3NH3PbI310.1126/science.1243167 ↗
10. Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals10.1126/science.aaa2725 ↗
11. Organic–inorganic hybrid lead halide perovskites for optoelectronic and electronic applications10.1039/C4CS00458B ↗
12. To greatly reduce defect via photo-annealing for high quality perovskite film10.1021/acsami.9b06873 ↗
13. Thermally stable MAPbI 3 perovskite solar cells with efficiency of 19.19% and area over 1 cm2 achieved by additive engineering10.1002/adma.201701073 ↗
14. Highly reproducible perovskite solar cells with average efficiency of 18.3% and best efficiency of 19.7% fabricated via lewis base adduct of lead(II) iodide10.1021/jacs.5b04930 ↗
15. Planar heterojunction perovskite solar cells via vapor-assisted solution process10.1021/ja411509g ↗
16. Efficient planar heterojunction mixed-halide perovskite solar cells deposited via spray-deposition10.1039/C4EE01546K ↗
17. Soft-cover deposition of scaling-up uniform perovskite thin films for high cost-performance solar cells10.1039/C6EE01411A ↗
18. Scalable fabrication of efficient organolead trihalide perovskite solar cells with doctor-bladed active layers10.1039/C4EE03907F ↗
19. High efficiency flexible perovskite solar cells using superior low temperature TiO 210.1039/C5EE02155C ↗
20. Toward large scale roll‐to‐roll production of fully printed perovskite solar cells10.1002/adma.201404598 ↗
21. Inkjet printable processes for dye-sensitized and perovskite solar cells and modules based on advanced nanocomposite materials10.1002/9781119283720.ch11 ↗
22. Perovskite ink with wide processing window for scalable high-efficiency solar cells10.1038/nenergy.2017.38 ↗
23. A vacuum flash–assisted solution process for high-efficiency large-area perovskite solar cells
24. The dawn of lead-free perovskite solar cell: highly stable double perovskite Cs2AgBiBr6 film10.1002/advs.201700759 ↗
25. Lewis acid–base adduct approach for high efficiency perovskite solar cells10.1021/acs.accounts.5b00440 ↗
26. Chemical pathways connecting lead (II) iodide and perovskite via polymeric plumbate (II) fiber10.1021/jacs.5b10599 ↗
27. FAPbI 3 flexible solar cells with a record efficiency of 19.38% fabricated in air via ligand and additive synergetic process10.1002/adfm.201902974 ↗
28. Efficient and stable perovskite solar cell with high open-circuit voltage by dimensional interface modification10.1021/acsami.8b22040 ↗
29. High crystallization of perovskite film by a fast electric current annealing process10.1021/acsami.7b07775 ↗
30. ZnO/SnO2 double electron transport layer guides improved open circuit voltage for highly efficient CH3NH3PbI3-based planar perovskite solar cells10.1021/acsaem.8b00293 ↗
31. TiO2/SnOxCly double layer for highly efficient planar perovskite solar cells10.1016/j.orgel.2017.07.050 ↗