High boiling point solvent-based dye solar cells pass a harsh thermal ageing test
Source abstract
Abstract
Abstract Dye solar cells (DSCs) have emerged as one of the most efficient third-generation photovoltaic (PV) technologies, whose commercialization is mainly hampered by the lack of sufficient long-term stability compared to conventional PV devices. In this work, it is demonstrated that solvent based DSCs using tetraglyme as a non-nitrile, high boiling point, organic solvent for the iodide/triiodide redox shuttle, can pass a harsh accelerated thermal ageing test of 3000 h light soaking followed by additional 2000 h thermal ageing at 85 °C. Electrochemical and spectroscopic analysis on thermal degradation effects revealed that a conduction band edge shift towards more negative potentials for tetraglyme-DSCs underlies the enhanced photopotential of aged cells, compensating for the thermally induced photocurrent reduction due to slight triiodide loss. The tetraglyme-based solar cells (in contrast to cells based on methoxypropionitrile-MPN) showed exceptional stability, compatible with the established IEC61646 protocol for thin film PVs, keeping ca. 90% of their initial performance under 1 sun illumination. Quite notably, the cells even increased their initial efficiency by 4% when illuminated under 0.1 sun. This is the first time in literature that such a stability record is accomplished for solvent based DSCs utilizing commercially available and cost-effective materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Sensitization of charge injection into semiconductors with large band gap10.1016/0013-4686(68)80076-3 ↗
2. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
3. Solar cell efficiency tables (version 41)10.1002/pip.2352 ↗
4. Porphyrin-sensitized solar cells with cobalt (II/III)–based redox electrolyte exceed 12 percent efficiency10.1126/science.1209688 ↗
5. Efficient inorganic–organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors10.1038/nphoton.2013.80 ↗
6. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
7. A cobalt complex redox shuttle for dye-sensitized solar cells with high open-circuit potentials10.1038/ncomms1655 ↗
8. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
9. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
10. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
11. Review of stability for advanced dye solar cells10.1039/b922801b ↗
12. Commercialization of dye sensitized solar cells: present status and future research needs to improve efficiency, stability, and manufacturing10.1116/1.3676433 ↗
13. Photovoltaic performance and long-term stability of dye-sensitized mesoscopic solar cells10.1016/j.crci.2005.06.037 ↗
14. Stable high efficiency dye-sensitized solar cells based on a cobalt polymer gel electrolyte10.1039/c3cc44555k ↗
15. M. Grätzel, Nanostructured photosystems for the generation of electricity from sunlight, in: Presentation at E-MRS 2013 Spring Meeting, 201310.1063/1.4794710 ↗
16. Overcoming ultraviolet light instability of sensitized TiO2 with meso-superstructured organometal tri-halide perovskite solar cells10.1038/ncomms3885 ↗
17. Dye-sensitized solar cells10.1021/cr900356p ↗
18. Long-term stability testing of dye-sensitized solar cells10.1016/j.jphotochem.2003.12.017 ↗
19. Dye molecules in electrolytes: new approach for suppression of dye-desorption in dye-sensitized solar cells10.1038/srep01712 ↗
20. Thermal stress effects on dye-sensitized solar cells (DSSCs)10.1016/j.microrel.2011.07.061 ↗
21. Degradation mechanisms investigation for long-term thermal stability of dye-sensitized solar cells10.1016/S1452-3981(23)13430-4 ↗
22. Degradation mechanisms of Pt counter electrodes for dye sensitized solar cells10.1016/j.solmat.2012.04.021 ↗
23. Degradation analysis of thermal aged back-illuminated dye-sensitized solar cells10.1149/2.111204jes ↗
24. Thermal stability of dye-sensitized solar cells with current collecting grid10.1016/j.solmat.2009.01.008 ↗
25. High temperature stability of dye solar cells10.1016/j.solmat.2013.04.017 ↗
26. IEC 61646, Thin-Film Terrestrial Photovoltaic (PV) Modules-Design Qualification and Type Approval, 2008
27. Packaging, scale-up and commercialisation of dye solar cells
28. Highly durable dye-sensitized solar cells
29. Long-term stability of dye solar cells10.1016/j.solener.2010.10.016 ↗
30. A thiophene-based anchoring ligand and its heteroleptic Ru(II)-complex for efficient thin-film dye-sensitized solar cells10.1002/adfm.201001863 ↗
31. Size effect of synthetic saponite-clay in quasi-solid electrolyte for dye-sensititized solar cells10.1016/j.solmat.2013.05.012 ↗
32. Prolonged light and thermal stress effects on industrial dye-sensitized solar cells: a micro-Raman investigation on the long-term stability of aged cells10.1021/jp901185f ↗
33. Heteroleptic ruthenium complex containing substituted triphenylamine hole-transport unit as sensitizer for stable dye-sensitized solar cell10.1016/j.nantod.2010.02.003 ↗
34. Quasi-solid-state dye-sensitized solar cells using room temperature molten salts and a low molecular weight gelator10.1039/b110019j ↗
35. Synthesis, purification and characterization of ionic liquids10.1007/128_2008_31 ↗
36. Development of large area photovoltaic dye cells at 3G solar10.1016/j.solmat.2009.11.019 ↗
37. Worldwide first fully up-scaled fabrication of 60×100cm2 dye solar module prototypes10.1002/pip.1213 ↗
38. Long-term thermal stability of liquid dye solar cells10.1021/jp400060d ↗
39. Asghar · Sol. Energy Mater. Sol. Cells · 2014 · 128 · 33510.1016/j.solmat.2014.05.048 ↗
40. The perils of solar cell efficiency measurements10.1038/nphoton.2012.119 ↗
41. Resonance Raman scattering of a dye-sensitized solar cell: mechanism of thiocyanato ligand exchange10.1021/jp011062u ↗
42. Iodide chemistry in dye-sensitized solar cells: making and breaking I−I bonds for solar energy conversion10.1021/jz101311d ↗
43. Reverse bias degradation in dye solar cells10.1063/1.4754116 ↗
44. The mechanism behind the beneficial effect of light soaking on injection efficiency and photocurrent in dye sensitized solar cells10.1039/c1ee01443a ↗
45. In situ image processing method to investigate performance and stability of dye solar cells10.1016/j.solener.2011.10.006 ↗
46. Aligned carbon nanotube/polymer hybrid electrolytes for high performance dye sensitized solar cell applications10.1039/C5RA10843H ↗
47. Photoelectrochemical properties of N-incorporated ZnO films deposited by reactive RF magnetron sputtering10.1149/1.2754074 ↗
48. Stable high efficiency dye-sensitized solar cells based on a cobalt polymer gel electrolyte10.1039/c3cc44555k ↗
49. Significant enhancement of power conversion efficiency for dye sensitized solar cell using 1D/3D network nanostructures as photoanodes10.1038/srep09305 ↗
50. Determination of the electron lifetime in nanocrystalline dye solar cells by open-circuit voltage decay measurements10.1002/cphc.200200615 ↗
51. Characterization of nanostructured hybrid and organic solar cells by impedance spectroscopy10.1039/c0cp02249g ↗
52. Influence of electrolyte in transport and recombination in dye-sensitized solar cells studied by impedance spectroscopy10.1016/j.solmat.2004.07.017 ↗
53. Correlation between photovoltaic performance and impedance spectroscopy of dye-sensitized solar cells based on ionic liquids10.1021/jp066178a ↗
54. Influence of fluorine plasma treatment of TiO2 Films on the behavior of dye solar cells employing the Co(II)/(III) redox couple10.1021/jp412766f ↗
55. Interface stability of a TiO2/3-methoxypropionitrile-based electrolyte: first evidence for solid electrolyte interphase formation and implications10.1002/cphc.201300904 ↗
56. In situ micro- and macro-Raman investigations of the redox couple behaviour in DSSCs10.1016/j.ica.2007.06.018 ↗
57. Degradation analysis of dye-sensitized solar cell module after long-term stability test under outdoor working conditions10.1016/j.solmat.2008.10.022 ↗
58. Fabrication and reliability of dye solar cells: a resonance Raman scattering study10.1016/j.microrel.2012.06.150 ↗
59. Patterns of efficiency and degradation in dye sensitization solar cells measured with imaging techniques10.1016/S0927-0248(01)00121-0 ↗
60. Solvent effects on the adsorption geometry and electronic structure of dye-sensitized TiO2: a first-principles investigation10.1021/jp209420h ↗
61. Resonance micro-Raman spectrophotoelectrochemistry on nanocrystalline TiO2 thin film electrodes sensitized by Ru(II) complexes10.1016/j.ccr.2004.03.023 ↗
62. Dye stability and performances of dye-sensitized solar cells with different nitrogen additives at elevated temperatures – can sterically hindered pyridines prevent dye degradation?10.1016/j.solmat.2010.04.076 ↗
63. Molecular photovoltaics10.1021/ar980112j ↗
64. Characteristics of the iodide/triiodide redox mediator in dye-sensitized solar cells10.1021/ar900138m ↗
65. Solvent effects at the photoelectrode/electrolyte interface of a DSC: A combined spectroscopic and photoelectrochemical study10.1021/jp2007864 ↗