Enhancing poly-Si contact through a highly conductive and ultra-thin TiN layer for high-efficiency passivating contact silicon solar cells
Source abstract
Abstract
High-performance passivating contacts with excellent electron selective property is a prerequisite for silicon solar cells with high power conversion efficiency. In this work, a highly conductive, ultra-thin electron-selective titanium nitride (TiN) film is prepared by reactive magnetron sputtering for tunnel oxide passivated contact (TOPCon) solar cells. The deposition parameters, crystal structure, and chemical state were systematically investigated. A higher TiN content and stronger TiN (111) diffraction peak resulted in higher conductivity. We demonstrated that the TiN film possessed a conductivity as high as 5000 S/cm and a relatively low work function of 4.26 eV. An ultra-thin TiN film (1–2 nm) was inserted between the n + poly-Si and rear electrode to reduce the interface contact resistance and interface barrier height and subsequently obtain better electron transport. The cross-sectional morphology and elemental distribution of the n + poly-Si/TiN/Ag interface were tested using high-resolution transmission electron microscopy. The developed TiN film was a proof of concept, and it demonstrated an impressive cell efficiency of 24.6% ( V oc = 707.1 mV, J sc = 41.62 mA/cm 2, FF = 83.7%) on TOPCon solar cells. Our work provides vital insights and a detailed supplement toward the optimization of electron contact for silicon solar cells or perovskite solar cells. The outcomes of the study indicate the potential for use in applications involving high fill factor photovoltaic devices.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and devices · Nanowire Synthesis and Applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Boron spin-on doping for poly-Si/SiOx passivating contacts
2. Poly-silicon passivating contacts for silicon solar cells: interface passivation and carrier transport mechanism10.1021/acsaem.8b02149 ↗
3. Solution-doped polysilicon passivating contacts for silicon solar cells
4. Glunz · 2013
5. On the limiting efficiency for silicon heterojunction solar cells10.1016/j.solmat.2021.111291 ↗
6. Ultrathin SiO2 layer formed by the nitric acid oxidation of Si (NAOS) method to improve the thermal-SiO2/Si interface for crystalline Si solar cells10.1016/j.apsusc.2016.06.001 ↗
7. Passivation properties of tunnel oxide layer in passivated contact silicon solar cells10.1016/j.apsusc.2017.02.195 ↗
8. Simple cleaning and conditioning of silicon surfaces with UV/ozone sources10.1016/j.egypro.2014.08.067 ↗
9. Screen-printed n-type industry solar cells with tunnel oxide passivated contact doped by phosphorus diffusion10.1016/j.spmi.2020.106720 ↗
10. Nanoscale SiOx tunnel oxide deposition techniques and their influence on cell parameters of TOPCon solar cells10.1007/s42341-021-00356-7 ↗
11. Polysilicon contact structures for silicon solar cells using atomic layer deposited oxides and nitrides as ultra-thin dielectric interlayers10.1002/pip.3485 ↗
12. Development of conductive SiCx:H as a new hydrogenation technique for tunnel oxide passivating contacts
13. Passivating contact with phosphorus-doped polycrystalline silicon-nitride with an excellent implied open-circuit voltage of 745 mV and its application in 23.88% efficiency TOPCon solar cells10.1002/solr.202100644 ↗
14. Frigge · 2016
15. 2022
16. Low-temperature synthesis TiOx passivation layer for organic-silicon heterojunction solar cell with a high open-circuit voltage10.1016/j.nanoen.2017.02.024 ↗
17. One-step formation of low work-function, transparent and conductive MgFxOy electron extraction for silicon solar cells
18. Modulation-doped ZnO as high performance electron-selective layer for efficient silicon heterojunction solar cells10.1016/j.nanoen.2018.10.010 ↗
19. Dual-function electron-conductive, hole-blocking titanium nitride contacts for efficient silicon solar cells10.1016/j.joule.2019.03.008 ↗
20. Centimetre-scale perovskite solar cells with fill factors of more than 86 per cent10.1038/s41586-021-04216-5 ↗
21. Investigation of electrical and optical properties of low temperature titanium nitride grown by rf-magnetron sputtering10.1088/1742-6596/917/5/052025 ↗
22. Titanium nitride electron-conductive contact for silicon solar cells by radio frequency sputtering from a TiN target10.1021/acsami.0c04439 ↗
23. Silicon CVD deposition for low cost applications in photovoltaics10.1016/j.surfcoat.2007.04.089 ↗
24. Nitrogen pulsing to modify the properties of titanium nitride thin films sputter deposited10.1023/A:1020600502303 ↗
25. Influence of nitrogen gas flow rate on the structural, morphological and electrical properties of sputtered TiN films10.1007/s10854-012-0905-4 ↗
26. Spectroscopic analysis of ultra-thin TiN as a diffusion barrier for lithium-ion batteries by ToF-SIMS, XPS, and EELS
27. Doping-free titanium nitride carrier selective contacts for efficient organic–inorganic hybrid solar cells10.1021/acsaem.0c01517 ↗
28. Contact resistivity and adhesion of copper alloy seed layer for copper-plated silicon heterojunction solar cells10.7567/JJAP.57.08RB13 ↗
29. An abnormal correlation between electron work function and corrosion resistance in Ti-Zr-Be-(Ni/Fe) metallic glasses10.1016/j.corsci.2019.108392 ↗
30. Modulation of the TCO/MoOx front contact enables >21% high-efficiency dopant-free silicon solar cells10.1021/acsaem.2c02933 ↗