Experimental study of 3D solid-liquid interfaces and their influence on directional solidification silicon ingot
Source abstract
Abstract
Abstract The three dimensions (3D) Solid/Liquid (S/L) interface is hard to be directly detected during the directional solidification silicon ingot growth, making it an obstacle to study their influence on the defect density and electrical properties of the solar cells. In this work, we firstly release a method to identify and measure the 3D S/L interface shape of G6 size silicon ingots for the photovoltaic (PV) industry. Secondly, we study the relations between the 3D S/L interface shape and the hot zone structure, the growth of the defect density in the ingots, and the conversion efficiency of the solar cells. A highly symmetrical and mild convex 3D S/L interface shape is obtained by optimization of the heat dissipation structure and the type of the heater power (AC/DC) of the hot zone, while it presents distorted at the periphery of the ingots grown by the conventional hot zone. The formation mechanism of the distorted 3D S/L interface shapes is discussed with the spatial distribution of the growth speed derived from a modified Stefans’ equation at the interface. The distribution of defect densities within the optimized ingot is uniform and lower than that of the conventional ingot. And as a consequence, the weighted average solar cell efficiency of the optimized ingot is increased by 0.08%, and the deviation of the cell conversion efficiency decreases from 0.13% to 0.07%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Multicrystalline silicon for solar cells10.1016/j.tsf.2005.01.061 ↗
2. Floating cast method to realize high-quality Si bulk multicrystals for solar cells10.1016/j.jcrysgro.2008.10.098 ↗
3. Growth of structure-controlled polycrystalline silicon ingots for solar cells by casting10.1016/j.actamat.2006.03.014 ↗
4. Multicrystalline silicon crystal assisted by silicon flakes as seeds10.1016/j.solmat.2017.09.004 ↗
5. Influence of temperature gradient at interface on defect multiplication in seed-assisted multicrystalline silicon
6. Comparison of defect formations in solar silicon growth from small random and large oriented seeds10.1016/j.jcrysgro.2015.02.087 ↗
7. The emergence of high-performance multi-crystalline silicon in photovoltaics10.1016/j.jcrysgro.2016.10.072 ↗
8. Control of ingot quality and solar cell appearance of cast mono-like silicon by using seed partitions10.1016/j.jcrysgro.2017.06.014 ↗
9. The electrical properties of high performance multicrystalline silicon and mono-like silicon: material limitations and cell potential
10. Seed-assisted cast quasi-single crystalline silicon for photovoltaic application: towards high efficiency and low cost silicon solar cells10.1016/j.solmat.2012.02.024 ↗
11. Designing functional Σ13 grain boundaries at seed junctions for high-quality cast quasi-single crystalline silicon
12. Mono-like silicon growth using functional grain boundaries to limit area of multicrystalline grains10.1109/JPHOTOV.2013.2281730 ↗
13. Higher quality mono-like cast silicon with induced grain boundaries10.1016/j.solmat.2015.03.027 ↗
14. Towards high-efficiency industrial p-type mono-like Si PERC solar cells
15. Seed-assisted growth of cast-mono silicon for photovoltaic application: challenges and strategies10.1002/solr.201900486 ↗
16. Numerical and experimental investigation of sectional heater for improving multi-crystalline silicon ingot quality for solar cells10.1016/j.jcrysgro.2020.125606 ↗
17. Thermal stress induced dislocation distribution in directional solidification of Si for PV application10.1016/j.jcrysgro.2014.09.017 ↗
18. Numerical analysis of thermal stress and dislocation density distributions in large size multi-crystalline silicon ingots during the seeded growth process10.1016/j.jcrysgro.2016.09.061 ↗
19. Evaluation of improvement strategies of grain structure properties in high performance multi-crystalline silicon ingots10.1016/j.jcrysgro.2019.03.005 ↗
20. Effect of the crystal–melt interface on the grown-in defects in silicon CZ growth10.1016/j.jcrysgro.2006.11.217 ↗
21. Influence of seed/crystal interface shape on dislocation generation in Czochralski Si crystal growth10.1016/j.physb.2007.09.021 ↗
22. The effect of curved interface shape on thermal stress during Czochralski crystal growth %10.1016/0022-0248(93)90080-G ↗
23. Numerical study of the influence of forced melt convection on the impurities transport in a silicon directional solidification process10.1016/j.jcrysgro.2016.11.122 ↗
24. Modeling analysis of unsteady three-dimensional turbulent melt flow during Czochralski growth of Si crystals10.1016/S0022-0248(01)01314-8 ↗
25. Analysis of 3D unsteady melt flow and crystallization front geometry during a casting process for silicon solar cells10.1016/j.jcrysgro.2006.12.050 ↗
26. Unsteady coupled 3D calculations of melt flow, interface shape, and species transport for directional solidification of silicon in a traveling magnetic field10.1016/j.jcrysgro.2012.12.135 ↗
27. Optimization of magnetically driven directional solidification of silicon using artificial neural networks and Gaussian process models10.1016/j.jcrysgro.2017.05.007 ↗
28. Numerical study of melt flow under the influence of heater-generating magnetic field during directional solidification of silicon ingots10.1016/j.jcrysgro.2017.12.033 ↗
29. The effect of the growth rate on the microstructure of multi-crystalline silicon10.1016/j.jcrysgro.2012.08.028 ↗
30. Controlling solidification front shape and thermal stress in growing quasi-single-crystal silicon ingots: process design for seeded directional solidification10.1016/j.applthermaleng.2015.08.023 ↗