journal article·2018-08

Morphology and electrical characteristics of polymer: Fullerene films deposited by electrospray

Xin-Yan Zhao, Zui Tao, Weiwei Yang, Kaichen Xu, Lu Wang, Yuanyuan Jiang, Qianchen Zhang, Zhiqiang Gao, Baoxiu Mi, Minghui Hong, Weiwei Deng

Publisher page

Abstract

Abstract Electrospray (ES) has emerged as an attractive approach to fabricate thin-film organic photovoltaic devices. However, the morphological properties and their implication to electrical characteristics of polymer:fullerene blends deposited by this method have not been clearly understood yet. In order to uncover the interplay of nanoscale morphology and electrical properties of ES-deposited films, both the residues of single droplets and thin films from the overlapping of multiple droplets were investigated by various characterization techniques. The surface morphology was demonstrated in details by the optical microscope (OM) and atom force microscope (AFM). The ordering structures and aggregation of the polymer were identified by the Raman and UV–vis spectroscopic investigations. The spatially distribution map of the P3HT aggregation states was analyzed by fitting the C˭C mode of P3HT with Lorentzian functions. The conductive atomic force microscopy (C-AFM) was used to quantify local currents and reveal the correlation between the nanostructure and charge-transport mobility. Both surface morphology and aggregation of the P3HT were found to strongly depend on the overlapping boundaries formed by the dry residues of individual droplets. More P3HT aggregation present at the boundaries. However, boundaries also show significantly higher charge-transport resistance thus lower current. Thin films deposited with less droplet evaporation exhibit more homogenous morphology, more uniform phase segregation, and consequently higher charge mobility.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Organic Electronics and Photovoltaics · Carbon Nanotubes in Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. F.C.S.P. Thanks, Heliatek sets new OPV world record efficiency of 13.2% 〈http://www.heliatek.com/en/press/press-releases/details/heliatek-sets-new-organic-photovoltaic-world-record-efficiency-of-13-2〉, 2016.
2. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
3. Single-junction binary-blend nonfullerene polymer solar cells with 12.1% efficiency10.1002/adma.201700144 ↗
4. Perovskite and organic solar cells fabricated by inkjet printing: progress and prospects10.1002/adfm.201703704 ↗
5. Inkjet printing of organic electronics – comparison of deposition techniques and state-of-the-art developments10.1039/c2tc00255h ↗
6. Screen printing as a scalable and low-cost approach for rigid and flexible thin-film transistors using separated carbon nanotubes10.1021/nn505979j ↗
7. Large-area screen-printed internal extraction layers for organic light-emitting diodes10.1021/acsphotonics.6b01027 ↗
8. Fast printing and in situ morphology observation of organic photovoltaics using slot-die coating10.1002/adma.201404040 ↗
9. 3D printer based slot-die coater as a lab-to-fab translation tool for solution-processed solar cells10.1002/aenm.201401539 ↗
10. Fully spray-coated organic solar cells on woven polyester cotton fabrics for wearable energy harvesting applications10.1039/C5TA03389F ↗
11. Optically monitored spray coating system for the controlled deposition of the photoactive layer in organic solar cells10.1063/1.4906454 ↗
12. High-performance flexible perovskite solar cells by using a combination of ultrasonic spray-coating and low thermal budget photonic curing10.1021/acsphotonics.5b00119 ↗
13. Mask-less patterning of organic light emitting diodes using electrospray and selective biasing on pixel electrodes10.1063/1.4919382 ↗
14. Electrospray deposition of polymer thin films for organic light-emitting diodes10.1186/1556-276X-7-52 ↗
15. High mobility transistors based on electrospray-printed small-molecule/polymer semiconducting blends10.1039/C6TC00238B ↗
16. Enhancement of the performance of organic solar cells by electrospray deposition with optimal solvent system10.1016/j.solmat.2013.10.020 ↗
17. Effects of Damkhöler number of evaporation on the morphology of active layer and the performance of organic heterojunction solar cells fabricated by electrospray method10.1016/j.solmat.2014.11.029 ↗
18. Controlled donor-accepter ratio for application of organic photovoltaic cells by alternative intermittent electrospray co-deposition10.1016/j.orgel.2016.03.011 ↗
19. Performance optimization of polymer solar cells using electrostatically sprayed photoactive layers10.1002/adfm.201000433 ↗
20. Fabrication of ordered bulk heterojunction organic photovoltaic cells using nanopatterning and electrohydrodynamic spray deposition methods10.1039/c2nr32165c ↗
21. Realization of solution processed multi-layer bulk heterojunction organic solar cells by electro-spray deposition10.1016/j.orgel.2012.06.016 ↗
22. Bulk heterojunction organic photovoltaic cell fabricated by the electrospray deposition method using mixed organic solvent10.1002/pssr.201105232 ↗
23. Morphology controlled bulk-heterojunction layers of fully electro-spray coated organic solar cells10.1016/j.solmat.2012.06.027 ↗
24. Spray deposition of electrohydrodynamically atomized polymer mixture for active layer fabrication in organic photovoltaics10.1016/j.solmat.2010.04.057 ↗
25. Molecular ordering of spin-coated and electrosprayed P3HT:PCBM thin films and their applications to photovoltaic cell10.1016/j.tsf.2016.06.019 ↗
26. Improved performance of organic photovoltaic cells with PTB7-Th:PC 71 BM by optimized solvent evaporation time in electrospray deposition10.1016/j.orgel.2017.05.049 ↗
27. Stability enhancement of polymer solar cells in trilayer configuration10.1016/j.tsf.2017.08.040 ↗
28. Design and fabrication of photonic structured organic solar cells by electrospraying10.1021/acs.jpcc.7b01698 ↗
29. Multilayer organic photovoltaic devices fabricated by electrospray deposition technique and the role of the interlayer10.1016/j.tsf.2017.06.026 ↗
30. Precise morphology control and continuous fabrication of perovskite solar cells using droplet-controllable electrospray coating system10.1021/acsami.6b15095 ↗
31. Electrospray-assisted fabrication of moisture-resistant and highly stable perovskite solar cells at ambient conditions10.1002/aenm.201700210 ↗
32. Electrospray technique in fabricating perovskite-based hybrid solar cells under ambient conditions10.1039/C6RA27704G ↗
33. Electrospray as a fabrication tool in organic photovoltaics10.1166/rnn.2012.1011 ↗
34. Fundamentals of cone-jet electrospray, the aerosol measurement: principles
35. Spectroscopic investigations of three-phase morphology evolution in polymer: fullerene solar cell blends10.1021/acs.jpcc.6b02898 ↗
36. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
37. Structural order in bulk heterojunction films prepared with solvent additives10.1002/adma.201003690 ↗
38. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
39. The Marangoni effects10.1038/187186a0 ↗
40. Marangoni effect reverses coffee-ring depositions10.1021/jp0609232 ↗
41. The importance of fullerene percolation in the mixed regions of polymer-fullerene bulk heterojunction solar cells10.1002/aenm.201200637 ↗
42. Inter-diffused ordered bulk heterojunction organic photovoltaics: optimized morphology for efficient exciton dissociation and charge transport10.1016/j.solmat.2013.10.019 ↗
43. Impact of mesoscale order on open-circuit voltage in organic solar cells10.1038/nmat4167 ↗
44. Scanning near-field and confocal Raman microscopic investigation of P3HT-PCBM systems for solar cell applications10.1021/ma052590x ↗
45. Probing the annealing induced molecular ordering in bulk heterojunction polymer solar cells using in-situ Raman spectroscopy10.1016/j.solmat.2013.09.034 ↗
46. Resonance chemical imaging of polythiophene/fullerene photovoltaic thin films: mapping morphology-dependent aggregated and unaggregated C˭C species10.1021/ja900636z ↗
47. The nature of in-plane skeleton Raman modes of P3HT and their correlation to the degree of molecular order in P3HT:PCBM blend thin films10.1021/ja2013104 ↗