journal article·2023-08Open access

Tungsten nanodisc-based spectrally-selective polarization-independent thermal emitters

Anisha Chirumamilla, Fei Ding, Yuanqing Yang, Murugan Senthil Mani Rajan, Sergey I. Bozhevolnyi, Duncan S. Sutherland, Kjeld Pedersen, Manohar Chirumamilla

Abstract

Thermophotovoltaic (TPV) cells convert thermally emitted photons into electrical power using photovoltaic (PV) detectors. To realize highly efficient thermal energy harvesting using TPV conversion, high-temperature stable spectrally-selective emitters are needed. The deployment of TPV technology lags behind conventional solar-PV technology due to the lack of large-scale fabrication of efficient thermal emitters, which would preferentially emit in the PV cell absorption band. In this work, we demonstrate a simple large-area nanofabrication method based on the hole-mask colloidal lithography and sputtering, which allows one to fabricate tungsten (W) nanodisc spectrally-selective emitters (consisting of a metal-insulator-metal configuration) with a high emissivity below the InGaAsSb PV-cell cut-off wavelength of 2.25 μm and a gradually decreasing emissivity (down to < 10%) in the mid-infrared region. Frequency-domain time-domain (FDTD) simulations reveal that the spectral selectivity is achieved due to the localized surface plasmon resonance of W nanodiscs strongly influenced by the insulator thickness. Importantly, the W emitters show thermal stability at temperatures of up to 1100 °C, and emissivity invariance to changes in polarization and incidence angles up to 65°. This work represents a significant step towards the realization of high-temperature stable efficient thermal emitters by a facile and cost-effective fabrication method, thereby promoting the implementation of photonic/plasmonic thermal emitters in the next-generation thermal energy harvesting systems. The method proposed in this study holds potential for scalability; however, empirical evidence to demonstrate this scalability has not yet been established. Subsequent studies are needed to confirm the scalability of the proposed method and its extensive applicability.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Thermal Radiation and Cooling Technologies · solar cell performance optimization · Quantum Electrodynamics and Casimir Effect

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Thermophotovoltaic efficiency of 4010.1038/s41586-022-04473-y ↗
2. Efficient and scalable GaInAs thermophotovoltaic devices10.1016/j.joule.2022.10.002 ↗
3. Air-bridge Si thermophotovoltaic cell with high photon utilization10.1021/acsenergylett.2c01075 ↗
4. Highly confined spectrally selective absorber-emitter for effective solar thermophotovoltaics10.1016/j.solmat.2022.111878 ↗
5. Tungsten–carbon nanotube composite photonic crystals as thermally stable spectral-selective absorbers and emitters for thermophotovoltaics10.1002/aenm.201801471 ↗
6. Refractory plasmonics with titanium nitride: broadband metamaterial absorber10.1002/adma.201401874 ↗
7. Metallic photonic crystal absorber-emitter for efficient spectral control in high-temperature solar thermophotovoltaics10.1002/aenm.201400334 ↗
8. Controlling thermal emission with refractory epsilon-near-zero metamaterials via topological transitions10.1038/ncomms11809 ↗
9. Metamaterial emitter for thermophotovoltaics stable up to 1400 °C10.1038/s41598-019-43640-6 ↗
10. Thermal stability of tungsten based metamaterial emitter under medium vacuum and inert gas conditions10.1038/s41598-020-60419-2 ↗
11. Unprecedented thermal stability of plasmonic titanium nitride films up to 1400 °C10.1002/adom.202100323 ↗
12. High-efficiency thermophotovoltaic energy conversion enabled by a metamaterial selective emitter10.1364/OPTICA.5.000213 ↗
13. Enhanced photovoltaic energy conversion using thermally based spectral shaping10.1038/nenergy.2016.68 ↗
14. Thermophotovoltaic applications in waste heat recovery systems: example of GaSb cell10.1093/ijlct/ctz049 ↗
15. Improved performance of a near-field thermophotovoltaic device by a back gapped reflector10.1016/j.solmat.2021.111562 ↗
16. Ultraefficient thermophotovoltaic power conversion by band-edge spectral filtering10.1073/pnas.1903001116 ↗
17. Practical emitters for thermophotovoltaics: a review10.1117/1.JPE.9.032713 ↗
18. Overview and status of thermophotovoltaic systems10.1016/j.egypro.2014.01.018 ↗
19. Chubb · 2007
20. High-temperature refractory metasurfaces for solar thermophotovoltaic energy harvesting10.1021/acs.nanolett.8b03322 ↗
21. Enabling ideal selective solar absorption with 2D metallic dielectric photonic crystals10.1002/adma.201403302 ↗
22. All-metallic three-dimensional photonic crystals with a large infrared bandgap10.1038/417052a ↗
23. Three-dimensional self-assembled photonic crystals with high temperature stability for thermal emission modification10.1038/ncomms3630 ↗
24. A high-performance, metallodielectric 2D photonic crystal for thermophotovoltaics10.1016/j.solmat.2021.111536 ↗
25. Silicon-based spectrally selective emitters with good high-temperature stability on stepped metasurfaces10.1039/D2NR02299K ↗
26. Taming the blackbody with infrared metamaterials as selective thermal emitters10.1103/PhysRevLett.107.045901 ↗
27. Hole–mask colloidal lithography10.1002/adma.200700680 ↗
28. Spectrally selective emitters based on 3D Mo nanopillars for thermophotovoltaic energy harvesting
29. Large-area ultrabroadband absorber for solar thermophotovoltaics based on 3D titanium nitride nanopillars10.1002/adom.201700552 ↗
30. Multilayer tungsten-alumina-based broadband light absorbers for high-temperature applications10.1364/OME.6.002704 ↗
31. Which factor determines the optical losses in refractory tungsten thin films at high temperatures?10.1016/j.apsusc.2022.152927 ↗
32. Palik · 1997
33. Light extinction and scattering from individual and arrayed high-aspect-ratio trenches in metals10.1103/PhysRevB.93.075413 ↗
34. Selective emitter materials and designs for high-temperature thermophotovoltaic applications10.1016/j.solmat.2021.111554 ↗
35. Pareto optimal spectrally selective emitters for thermophotovoltaics via weak absorber critical coupling10.1002/aenm.201801035 ↗
36. Design of emitter structures based on resonant perfect absorption for thermophotovoltaic applications10.1364/OE.23.0A1373 ↗
37. Spectrally shaping high-temperature radiators for thermophotovoltaics using Mo-HfO2 trilayer-on-substrate structures10.1364/OE.26.004346 ↗
38. High-temperature selective emitter design and materials: titanium aluminum nitride alloys for thermophotovoltaics10.1021/acsami.9b13944 ↗
39. Thermal degradation of refractory layered metamaterial for thermophotovoltaic emitter under high vacuum condition10.1364/OE.27.003039 ↗