journal article·2022-09

Composite material incorporating protective coatings for photovoltaic cell encapsulation

Naiara Yurrita, Jon Aizpurua, Werther Cambarau, Gorka Imbuluzqueta, Juan M. Hernández, Francisco J. Cano, Irene Huerta, Elena Rico, Teodosio del Caño, Sarah Wölper, Florian Haacke, Oihana Zubillaga

Publisher page

Abstract

Photovoltaic modules consisting of one back-contact cell were manufactured by vacuum resin infusion process using glass reinforced epoxy composite as encapsulant where the cells are embedded. Incorporation of three coatings onto the composite surface was studied with the aim to improve the electrical performance stability of the modules under ultraviolet (UV), thermal cycling and damp-heat environmental weathering. Photovoltaic and aging performance were examined through the short-circuit current density values and colour change of the composite. Decrease in the initial photovoltaic performance of the modules was caused by the coating deposition. The highest drop in the initial values was observed for the varnish type coating, showing a decrease of 2.6% in short-circuit current. Regarding the performance stability, the decrease was more pronounced in the damp-heat test, presenting the varnish type coating the minimum loss of 1.4% in short-circuit current and a variation of 87% in b* chromatic parameter after 1000 h exposure at 85 °C and 85% relative humidity. The study concluded that the protective coating should be selected to provide the composite modules with an optimal trade-off between the initial electrical performance and the desired stability, with further research work targeted to improve moisture barrier properties. This work was supported by Eurostars Programme (Grant Agreement E12409) and Basque Government Elkartek 2021 Programme (Grant Agreement KK-2021/00066).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photovoltaic System Optimization Techniques · Photovoltaic Systems and Sustainability · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Additive manufacturing of continuous fiber reinforced polymer composites: design opportunities and novel applications10.1016/j.coco.2021.100907 ↗
2. Structural composites for multifunctional applications: current challenges and future trends10.1016/j.pmatsci.2017.04.005 ↗
3. Multifunctional application of carbon fiber reinforced polymer composites: electrical properties of the reinforcing carbon fibers – a short review10.1016/j.compositesb.2018.10.098 ↗
4. Composite material with enhanced ultraviolet performance stability for photovoltaic modules10.1016/j.solmat.2019.109947 ↗
5. Photovoltaic modules encapsulated in composite material modified with ultraviolet additives10.1016/j.solmat.2021.111250 ↗
6. Govaerts · 2021 · vols. 6–10
7. PVCOM project: manufacture of PV modules encapsulated in composite materials for integration in urban environments
8. Households with fibre reinforced composite BIPV modules in southern europe under net metering scheme10.1016/j.renene.2017.09.068 ↗
9. Lamination process and encapsulation materials for glass-glass PV module design
10. Polyolefin as PID-resistant encapsulant material in PV modules10.1016/j.solmat.2015.10.009 ↗
11. The causes and effects of degradation of encapsulant ethylene vinyl acetate copolymer (EVA) in crystalline silicon photovoltaic modules: a review10.1016/j.rser.2017.06.039 ↗
12. Optically transparent continuous glass fibre-reinforced epoxy matrix composite: fabrication, optical and mechanical properties10.1016/S0266-3538(02)00156-2 ↗
13. Transparent fiber glass reinforced composites10.1016/j.compscitech.2012.12.010 ↗
14. Preparation of high-performance transparent glass-fiber reinforced composites based on refractive index-tunable epoxy-functionalized siloxane hybrid matrix10.1016/j.compscitech.2020.108527 ↗
15. Degradation of the encapsulant polymer in outdoor weathered photovoltaic modules: spatially resolved inspection of EVA ageing by fluorescence and correlation to electroluminescence10.1016/j.solmat.2012.03.022 ↗
16. A review of the environmental factors degrading the performance of silicon wafer-based photovoltaic modules: failure detection methods and essential mitigation techniques10.1016/j.rser.2019.04.024 ↗
17. Comparative investigation and analysis of delaminated and discolored encapsulant degradation in crystalline silicon photovoltaic modules10.1016/j.solener.2020.04.041 ↗
18. Review on material selection, tailoring of material properties and ageing of composites with special reference to applicability in automotive suspension10.1016/j.matpr.2020.10.741 ↗
19. Synersgistic environmental degradation of glass reinforced polymer composites10.1016/j.polymdegradstab.2016.06.025 ↗
20. Effects of accelerated aging on mechanical, thermal and morphological behavior of polyurethane/epoxy/fiberglass composites10.1016/j.polymertesting.2016.01.010 ↗
21. Effect of methytrimethoxy silane modification on yellowing of epoxy coating on UV(B) exposure
22. Versatile protection of exterior coatings by the aid of graphene oxide nano-sheets; comparison with conventional UV absorbers10.1016/j.porgcoat.2017.11.020 ↗
23. Investigating the effects of surface treatments on adhesion properties of protective coatings on carbon fiber reinforced composite laminates10.1016/j.surfcoat.2019.125006 ↗
24. Scratch and wear resistance of transparent topcoats on carbon laminates10.1016/j.porgcoat.2009.10.015 ↗
25. A review of anti-reflection and self-cleaning coatings on photovoltaic panels10.1016/j.solener.2020.01.084 ↗
26. Modelling water vapour permeability through atomic layer deposition coated photovoltaic barrier defects10.1016/j.tsf.2014.08.042 ↗
27. Combined and sequential accelerated stress testing for derisking photovoltaic modules
28. International standard IEC 61215 Terrestrial photovoltaic (PV) modules-Design qualification and type approval; Part1: test requirements; Part1-1: special requirements for testing of crystalline silicon photovoltaic (PV) modules
29. Modeling of rates of moisture ingress into photovoltaic modules10.1016/j.solmat.2006.04.002 ↗
30. Moisture ingress in photovoltaic modules: a review10.1016/j.solener.2021.06.055 ↗
31. X. Jiang et al., Study on UV Induced EVA Discoloration for Crystalline Silicon Solar Modules, IEEE 7th World Conference on Photovoltaic Energy Conversion (WCPEC), 10-15 June 2018, Waikoloa Village, HI, USA.10.1109/PVSC.2018.8547677 ↗
32. Changes in solar cell parameters during damp-heat exposure10.1002/pip.2793 ↗