journal article·2021-01

A promising photovoltaic material Cu2MnSn(S,Se)4: Film growth and its application in solar cell

Yali Sun, Xiuling Li, Weiliang Qiao, Li Wu, Shoushuai Gao, Hui Li, Fangfang Liu, Jianping Ao, Yi Zhang

Publisher page

Abstract

Abstract Chalcogenides, such as CdTe, Cu(In,Ga)(S,Se)2 and Cu2ZnSn(S,Se)4, have made significant progress in their thin-film photovoltaic performance, but the toxicity (CdTe) and scarcity (Cu(In,Ga)(S,Se)2) of the constituent elements, as well as the inevitable anti-site disorder (Cu2ZnSn(S,Se)4), limit the further improvement of efficiency. In this work, a new thin-film absorber, Cu2MnSn(S,Se)4, is studied in terms of both film growth and characterization. We prepare the precursor film by the sol-gel method followed by selenization at high temperature. The absorbance of the precursor film is higher than 98% at wavelengths of 200–1300 nm. The crystallinity and the phase transformation of the prepared film can be tailored greatly by modifying the selenization process. When the selenization temperature is 570 °C and the selenization time is 30 min, a highly-crystalline, stannite-structured Cu2MnSn(S,Se)4 film is obtained. A solar cell fabricated with such Cu2MnSn(S,Se)4 film as the absorber layer achieves efficiency of 1.79%, which is the highest efficiency reported to date for this material. This study demonstrates that Cu2MnSn(S,Se)4 is a promising photovoltaic material and has huge potential for the fabrication of low-cost solar cell.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Historical analysis of champion photovoltaic module efficiencies10.1109/JPHOTOV.2018.2794387 ↗
2. Cd-free Cu(In,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.35%10.1109/JPHOTOV.2019.2937218 ↗
3. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
4. Cu2ZnSnS4 solar cells with over 10% power conversion efficiency enabled by heterojunction heat treatment10.1038/s41560-018-0206-0 ↗
5. Influencing mechanism of cationic ratios on efficiency of Cu2ZnSn(S,Se)4 solar cells fabricated with DMF-based solution approach10.1016/j.solmat.2019.02.029 ↗
6. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
7. Effect of solid-H2S gas reactions on CZTSSe thin film growth and photovoltaic properties of a 12.62% efficiency device10.1039/C9TA08310C ↗
8. A review on pulsed laser deposited CZTS thin films for solar cell applications10.1016/j.jallcom.2014.09.018 ↗
9. Colloidal synthesis, optical properties and hole transport layer applications of Cu2BaSnS4 (CBTS) nanocrystals10.1021/acsaem.9b00473 ↗
10. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
11. Comparative study of the luminescence and intrinsic point defects in the kesterite Cu2ZnSnS4 and chalcopyrite Cu(In,Ga)Se2 thin films used in photovoltaic applications10.1103/PhysRevB.84.165324 ↗
12. Photovoltaic materials and devices based on the alloyed kesterite absorber (AgxCu1-x)2ZnSnSe410.1002/aenm.201502468 ↗
13. Engineering of interface band bending and defects elimination via a Ag-graded active layer for efficient (Cu,Ag)2ZnSn(S,Se)4 solar cells10.1039/C7EE01405H ↗
14. Ag2ZnSn(S,Se)4: a highly promising absorber for thin film photovoltaics10.1063/1.4943270 ↗
15. Growth of Cu2MnSnS4 PV absorbers by sulfurization of evaporated precursors10.1016/j.jallcom.2016.09.176 ↗
16. Efficient optimization of the performance of Mn2+-doped kesterite solar cell: machine learning aided synthesis of high efficient Cu2(Mn,Zn)Sn(S,Se)4 solar cells
17. Microstructural and morphological properties of spin-coated Cu2MnSn(S,Se)4 thin films for solar cell applications10.1016/j.matlet.2017.07.041 ↗
18. New earth-abundant thin film solar cells based on chalcogenides10.3389/fchem.2019.00297 ↗
19. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides
20. Effect of the post-selenization time on the structural and optical properties of Cu2MnSn(S,Se)4 thin films synthesized by sol-gel technique10.1016/j.matlet.2017.05.025 ↗
21. Fabrication of a Cu2MnSn(S,Se)4 thin film based on a low-cost degradable solution process
22. Non-vacuum prepared 9.1% efficient Cu2Zn(Sn,Ge)(S,Se)4 solar cells using a novel selenization process10.1016/j.matlet.2017.02.090 ↗
23. Tailoring Mo(S,Se)2 structure for high efficient Cu2ZnSn(S,Se)4 solar cells10.1016/j.solmat.2017.10.011 ↗
24. Relevant efficiency enhancement of emerging Cu2MnSnS4 thin film solar cells by low temperature annealing10.1016/j.solener.2017.03.087 ↗
25. Novel metal chalcogenide SnSSe as a high-capacity anode for sodium-ion batteries10.1002/adma.201603219 ↗
26. Preparation of narrow band-gap Cu2Sn(S,Se)3 and fabrication of film by non-vacuum process
27. Reducing the interfacial defect density of CZTSSe solar cells by Mn substitution10.1039/C7TA09668B ↗
28. Far-infrared reflectivity and Raman scattering study of α-MnSe10.1103/PhysRevB.73.155203 ↗
29. Raman scattering studies of SnS2 and SnSe2
30. The effects of SnS2 secondary phases on Cu2ZnSnS4 solar cells: a promising mechanical exfoliation method for its removal10.1039/C7TA08242H ↗
31. On the formation mechanisms of Zn-rich Cu2ZnSnS4 films prepared by sulfurization of metallic stacks10.1016/j.solmat.2013.01.015 ↗
32. The crystallisation of Cu2ZnSnS4 thin film solar cell absorbers from co-electroplated Cu-Zn-Sn precursors10.1016/j.tsf.2008.11.019 ↗
33. Chemical insights into the instability of Cu2ZnSnS4 films during annealing10.1021/cm202379s ↗
34. A temporary barrier effect of the alloy layer during selenization: tailoring the thickness of MoSe2 for efficient Cu2ZnSnSe4 solar cells
35. The influence of Na on low temperature growth of CIGS thin film solar cells on polyimide substrates10.1016/j.tsf.2008.10.085 ↗
36. Carrier concentration dependence of band gap shift in n-type ZnO: Al films10.1063/1.2721374 ↗
37. 11.2% efficient solution processed kesterite solar cell with a low voltage deficit10.1002/aenm.201500712 ↗
38. Beyond 11% efficiency: characteristics of state-of-the-art Cu2ZnSn(S,Se)4 solar cells10.1002/aenm.201200348 ↗
39. Insight into the role of post-annealing in air for high efficient Cu2ZnSn(S,Se)4 solar cells10.1016/j.solmat.2018.03.029 ↗