journal article·2019-07

All-polymer solar cells based on photostable bis(perylene diimide) acceptor polymers

Ruben Lenaerts, Tom Cardeynaels, Ivan Sudakov, Jurgen Kesters, Pieter Verstappen, Jean Manca, Benoît Champagne, Laurence Lutsen, Dirk Vanderzande, Koen Vandewal, Etienne Goovaerts, Wouter Maes

Publisher page

Abstract

Fullerene-free organic photovoltaics have recently reached impressive power conversion efficiencies above 14% for single junctions, increasing their competitiveness with respect to alternative thin-film technologies. In most record devices, electron-donating conjugated polymers are combined with novel generation small molecule acceptors. All-polymer organic solar cells, on the other hand, still lag behind in efficiency, although they have specific advantages in terms of ink formulation and long-term operational stability. Another point of attention is the synthetic complexity of the active layer materials, notably on the side of the new acceptor molecules. Therefore, the present study focuses on the implementation of the stable and cost-effective perylene diimide structure as the key component of high-performance electron-accepting polymers. The synthesis, structural and optoelectronic characterization of four push-pull type copolymers containing the electron-deficient bis(perylene diimide) (bis-PDI) unit is reported, as well as the photovoltaic analysis of these acceptor materials in combination with a well-known donor polymer (PTB7-Th). The acceptor polymers differ in the electron-rich part of the alternating push-pull structure and their solar cell power conversion efficiencies range from 3.2 to 4.7%. The maximum efficiency - the best performance achieved with a bis-PDI polymer so far - is obtained for the structurally most simple polymer, containing merely thiophene as the electron-rich building block. Controlled degradation under blue light in air is monitored by the bleaching of the relevant UV–Vis absorption bands, demonstrating high stability for the bis-PDI-thiophene containing polymers as compared to some prototype small molecule acceptors (FBR and ITIC).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. The future of organic photovoltaics10.1039/C4CS00227J ↗
2. Recent advances in high performance donor-acceptor polymers for organic photovoltaics10.1016/j.progpolymsci.2017.03.003 ↗
3. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
4. Fluorination-enabled optimal morphology leads to over 11% efficiency for inverted small-molecule organic solar cells10.1038/ncomms13740 ↗
5. Over 11% efficiency in tandem polymer solar cells featured by a low-band-gap polymer with fine-tuned properties10.1002/adma.201600373 ↗
6. Polymer homo-tandem solar cells with best efficiency of 11.3%10.1002/adma.201404220 ↗
7. Life cycle analyses of organic photovoltaics: a review10.1039/c3ee42653j ↗
8. Toward bulk heterojunction polymer solar cells with thermally stable active layer morphology10.1117/1.JPE.4.040997 ↗
9. Reducing the efficiency-stability-cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells10.1038/nmat4797 ↗
10. Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
11. Roll-coated fabrication of fullerene-free organic solar cells with improved stability10.1002/advs.201500096 ↗
12. Non-fullerene acceptors for organic photovoltaics: an emerging horizon10.1039/C4MH00042K ↗
13. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
14. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
15. A wide band gap polymer with a deep highest occupied molecular orbital level enables 14.2% efficiency in polymer solar cells10.1021/jacs.8b02695 ↗
16. Organic and Solution-Processed Tandem Solar Cells with 17.3% Efficiency10.1126/science.aat2612 ↗
17. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
18. Molecular electron acceptors for efficient fullerene-free organic solar cells10.1039/C6CP07465K ↗
19. 9.0% power conversion efficiency from ternary all-polymer solar cells10.1039/C7EE01858D ↗
20. Li · 2018
21. All-polymer solar cells based on a conjugated polymer containing siloxane-functionalized side chains with efficiency over 10%10.1002/adma.201703906 ↗
22. Thermally stable All-polymer solar cells with high tolerance on blend ratios10.1002/aenm.201800029 ↗
23. Morphology optimization via side chain engineering enables all-polymer solar cells with excellent fill factor and stability10.1021/jacs.8b05038 ↗
24. “All that glisters is not gold”: an analysis of the synthetic complexity of efficient polymer donors for polymer solar cells10.1021/ma501894w ↗
25. Perylene imides for organic photovoltaics: yesterday, today, and tomorrow10.1002/adma.201104447 ↗
26. Chemical reaction between an ITIC electron acceptor and an amine-containing interfacial layer in non-fullerene solar cells10.1039/C7TA10306A ↗
27. Perylenediimides as non-fullerene acceptors in bulk-heterojunction solar cells (BHJSCs)10.1039/C6TA02045C ↗
28. Influence of molecular geometry of perylene diimide dimers and polymers on bulk heterojunction morphology toward high-performance nonfullerene polymer solar cells10.1002/adfm.201501971 ↗
29. Bisperylene bisimide based conjugated polymer as electron acceptor for polymer-polymer solar cells10.1007/s10118-017-1870-4 ↗
30. Facile approach to perylenemonoimide with short side chains for nonfullerene solar cells10.1021/acs.joc.7b00272 ↗
31. A perylene bisimide derivative with a LUMO level of −4.56 eV for non-fullerene solar cells10.1039/C6TC01045H ↗
32. Bay-linked perylene bisimides as promising non-fullerene acceptors for organic solar cells10.1039/C3CC47204C ↗
33. Fused perylenebisimide-carbazole: new ladder chromophores with enhanced third-order nonlinear optical activities10.1039/c1cc14071j ↗
34. A unique concept of copolymer composed of main chain donor and side chain acceptor for promising bulk heterojunction solar cells10.1016/j.synthmet.2015.04.012 ↗
35. Synthesis of donor–acceptor poly(perylene diimide-altoligothiophene) copolymers as n-type materials for polymeric solar cells10.1016/j.polymer.2010.03.040 ↗
36. Linear side chains in benzo[1,2-b:4,5-b']dithiophene-thieno[3,4-c]pyrrole-4,6-dione polymers direct self-assembly and solar cell performance10.1021/ja400365b ↗
37. Bandgap and molecular energy level control of conjugated polymer photovoltaic materials based on benzo[1,2-b:4,5-b′]dithiophene10.1021/ma800820r ↗
38. Poly(4,8-bis(2-ethylhexyloxy)benzo[1,2-b:4,5-b′]dithiophene vinylene): synthesis, optical and photovoltaic properties10.1002/pola.23952 ↗
39. Frisch · 2009
40. Zhao · Theor. Chem. Accounts · 2007 · 120 · 21510.1007/s00214-007-0310-x ↗
41. All-polymer solar cell performance optimized via systematic molecular weight tuning of both donor and acceptor polymers10.1021/jacs.5b10735 ↗
42. Open circuit voltage of organic solar cells: an in-depth review10.1039/C5EE02871J ↗
43. Synthesis and characterization of a series of bis(dimethyl-n-octylsilyl)oligothiophenes for organic thin film transistor applications10.1016/j.synthmet.2009.04.022 ↗
44. A rhodanine flanked nonfullerene acceptor for solution-processed organic photovoltaics10.1021/ja5110602 ↗