Determination of defect states and surface photovoltage in PTB7:PC71BM based bulk heterojunction solar cells
Source abstract
Abstract
Abstract Defects formed during the device processing acts as recombination centers and shows adverse effects on the photovoltaic performance of the organic solar cells (OSCs). In this manuscript, a study on the effect of defect states on the characteristics of bulk heterojunction (BHJ) solar cells, consisted of unannealed or thermally annealed active layer (ActL) of PTB7:PC71BM blend, have been performed by using the illumination intensity-dependent current-voltage and frequency dependent impedance spectroscopy measurements. Our results indicate that the photovoltaic performance of devices based on annealed ActL is superior than the bench dried ActL due to thermal annealing induced improvement in the thin film morphology. The measured low-frequency capacitance-voltage (C–V) characteristics under varying illumination intensities show strong dependency on the photoexcitation however, the change in the C–V characteristics is found to be quite different for unannealed and annealed devices. The C–V characteristics are analyzed using the drift-diffusion model to extract the effective built-in voltage (Vbi) and the surface photovoltage as a function of illumination intensity. The capacitance-frequency characteristics under illumination reveal that the change in the capacitance is associated with the photo-induced carrier occupation in the intermixture donor-acceptor phases, which act as the defect states in such devices. Further, it is modeled to quantify the defect states and to demonstrate the importance of thermal annealing for improving the OSCs device performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Silicon and Solar Cell Technologies · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. 25th anniversary article: bulk heterojunction solar cells: understanding the mechanism of operation10.1002/adma.201304373 ↗
2. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
3. Light harvesting for organic photovoltaics10.1021/acs.chemrev.6b00215 ↗
4. A review of non-fullerene polymer solar cells: from device physics to morphology control10.1088/1361-6633/ab0530 ↗
5. Effects of thermal annealing upon the morphology of polymer-fullerene blends10.1002/adfm.201000975 ↗
6. Different device architectures for bulk-heterojunction solar cells10.3389/fmats.2016.00039 ↗
7. Morphology characterization of bulk heterojunction solar cells10.1002/smtd.201700229 ↗
8. Bimolecular recombination in polymer/fullerene bulk heterojunction solar cells
9. Origin of reduced polaron recombination in organic semiconductor devices10.1103/PhysRevB.80.075203 ↗
10. Recombination via tail states in polythiophene:fullerene solar cells10.1103/PhysRevB.83.115209 ↗
11. Understanding the role of thickness and morphology of the constituent layers on the performance of inverted organic solar cells10.1016/j.solmat.2013.03.027 ↗
12. Effects of bulk and interfacial charge accumulation on fill factor in organic solar cells, Appl
13. The effects of donor : acceptor intermolecular mixing and acceptor crystallization on the composition ratio of blended, spin coated organic thin films10.1039/C6TC01458E ↗
14. Additive-morphology interplay and loss channels in “all-small-molecule” bulk-heterojunction (BHJ) solar cells with the nonfullerene acceptor IDTTBM10.1002/adfm.201705464 ↗
15. Efficient non-fullerene organic solar cells employing sequentially deposited donor–acceptor layers10.1039/C8TA06860G ↗
16. Impact of donor–acceptor interaction and solvent additive on the vertical composition distribution of bulk heterojunction polymer solar cells
17. Sequential deposition of organic films with eco‐compatible solvents improves performance and enables over 12%‐efficiency nonfullerene solar cells10.1002/adma.201808153 ↗
18. Charge transport and extraction of PTB7:PC 71 BM organic solar cells: effect of film thickness and thermal-annealing10.1039/C9RA02877C ↗
19. Elucidation of donor:acceptor phase separation in nonfullerene organic solar cells and its implications on device performance and charge carrier mobility10.1021/acsaem.9b01534 ↗
20. Impact of charge transport on current-voltage characteristics and power-conversion efficiency of organic solar cells10.1038/ncomms7951 ↗
21. Fundamentals of bulk heterojunction organic solar cells: an overview of stability/degradation issues and strategies for improvement10.1016/j.rser.2017.12.008 ↗
22. Balance between light absorption and recombination losses in solution-processed small molecule solar cells with normal or inverted structures10.1002/aenm.201801807 ↗
23. Ideal diode equation for organic heterojunctions. I. Derivation and application
24. Observation of the subgap optical absorption in polymer-fullerene blend solar cells10.1063/1.2171492 ↗
25. Sub-bandgap absorption in organic solar cells: experiment and theory10.1039/c3cp42236d ↗
26. Carrier capture kinetics at electrical defects in poly [2-methoxy-5- (2′-ethyl-hexyloxy)-1,4-phenylenevinylene] (MEH-PPV) studied using charge transient spectroscopy10.1063/1.4891832 ↗
27. Charge recombination in conjugated polymer/fullerene blended films studied by transient absorption spectroscopy10.1021/jp027101z ↗
28. Ultrafast electron dynamics in solar energy conversion10.1021/acs.chemrev.6b00807 ↗
29. Defects in organic electronic devices10.1002/pssa.200776805 ↗
30. Investigation of defects in organic semiconductors by charge based Deep Level Transient Spectroscopy (Q-DLTS)
31. Determination of gap defect states in organic bulk heterojunction solar cells from capacitance measurements10.1063/1.3270105 ↗
32. Mobility determination using frequency dependence of imaginary part of impedance (Im Z) for organic and polymeric thin films10.1063/1.3544935 ↗
33. Defect states and their energetic position and distribution in organic molecular semiconductors10.1063/1.4801636 ↗
34. Direct determination of defect density of states in organic bulk heterojunction solar cells10.1063/1.4962827 ↗
35. Origin of negative capacitance in bipolar organic diodes10.1103/PhysRevLett.120.116602 ↗
36. Impedance spectroscopy for emerging photovoltaics10.1021/acs.jpcc.9b00892 ↗
37. Impedance spectroscopy on degradation analysis of polymer/fullerene solar cells10.1016/j.solener.2018.12.024 ↗
38. Measurement of contact surface photo-voltage from forward bias C-V characteristics of P3HT:PCBM based BHJ solar cells10.1016/j.solmat.2017.07.010 ↗
39. Analytical description of the current-voltage relationship in organic-semiconductor diodes10.1063/1.5021989 ↗
40. Capacitance spectroscopy of light induced trap states in organic solar cells10.1021/acs.jpcc.6b06561 ↗
41. Photoinduced bulk polarization and its effects on photovoltaic actions in perovskite solar cells10.1021/acsnano.7b06413 ↗
42. Do capacitance measurements reveal light-induced bulk dielectric changes in photovoltaic perovskites?10.1021/acs.jpcc.7b11703 ↗
43. Quantifying interface states and bulk defects in high-efficiency solution-processed small-molecule solar cells by impedance and capacitance characteristics10.1002/pip.2586 ↗
44. Band unpinning and photovoltaic model for P3HT:PCBM organic bulk heterojunctions under illumination10.1016/j.cplett.2008.09.035 ↗
45. Relation between the barrier interface and the built-in potential in pentacene/C60 solar cell10.1063/1.3456393 ↗
46. Sensitivity of the mott-Schottky analysis in organic solar cells10.1021/jp300397f ↗
47. Built-in potential and validity of the Mott-Schottky analysis in organic bulk heterojunction solar cells10.1103/PhysRevB.84.153201 ↗
48. Determination of injection barriers in organic semiconductor devices from capacitance measurements10.1103/PhysRevLett.100.086802 ↗
49. Diffusive capacitance in space charge limited organic diodes: analysis of peak in capacitance-voltage characteristics10.1063/1.4812487 ↗
50. Determination of defect distributions from admittance measurements and application to Cu(In,Ga)Se 2 based heterojunctions10.1063/1.363401 ↗
51. Midgap states in a ‐Si:H and a ‐SiGe:H p ‐ i ‐ n solar cells and Schottky junctions by capacitance techniques10.1063/1.350444 ↗
52. Transport effects on capacitance-frequency analysis for defect characterization in organic photovoltaic devices10.1103/PhysRevApplied.6.064020 ↗
53. Capacitance methodology for investigating defect states in energy gap of organic semiconductor10.1016/j.orgel.2018.09.025 ↗