journal article·2014-06

A thienylenevinylene-phthalimide copolymer based polymer solar cell with high open circuit voltage: Effect of additive concentration on the open circuit voltage

Juhwan Kim, Jun-Seok Yeo, Hyung-Gu Jeong, Jin-Mun Yun, Yeong-A Kim, Dong-Yu Kim

Publisher page

Abstract

Abstract Polymer solar cells (PSCs) based on alkyl-substituted thienylenevinylene and phthalimide-based D-A copolymer (PTVPhI-Eh) as a donor and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) as an acceptor were investigated with the intent of gaining high performance photovoltaic properties. PTVPhI-Eh had a deep highest-occupied molecular orbital (HOMO) level, ~0.3 eV lower than rr-P3HT. As a result, PTVPhI-Eh:PC71BM devices showed a high open circuit voltage (Voc) of 0.87 V, which is over 0.2 V higher compared to that of P3HT:PCBM-based PSCs. The maximum power conversion efficiency (PCE) of PSCs was 4.14% with Voc of 0.87 V, short circuit current (Jsc) of 7.32 mA/cm2, and fill factor (FF) of 65%, under optimized conditions of a 1:1 wt/wt ratio and treatment with a 2 vol% 1-chloronaphthalene solvent additive. The Voc and consequent photovoltaic performance of this PSC was significantly affected by the concentration of the solvent additive. To determine the relationship between Voc and concentration of solvent additive, PTVPhI-Eh:PC71BM devices were investigated with various analyses such as optical spectroscopy, transmission electron microscopy (TEM), and X-ray diffraction (XRD).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Polymer photovoltaic cells:enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Photoinduced electron transfer from a conducting polymer to buckminsterfullerene10.1126/science.258.5087.1474 ↗
3. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
4. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
5. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
6. Manufacture, integration and demonstration of polymer solar cells in a lamp for the “Lighting Africa” initiative10.1039/b918441d ↗
7. Economic assessment of solar electricity production from organic-based photovoltaic modules in a domestic environment10.1039/c1ee01766g ↗
8. Solar cells with one-day energy payback for the factories of the future10.1039/C1EE02728J ↗
9. Materials and applications for large area electronics: solution-based approaches10.1021/cr900150b ↗
11. Polymer-fullerene composite solar cells10.1002/anie.200702506 ↗
12. Alternating polyfluorenes collect solar light in polymer photovoltaics10.1021/ar900073s ↗
13. A new class of semiconducting polymers for bulk heterojunction solar cells with exceptionally high performance10.1021/ar1000296 ↗
14. New conjugated polymers for plastic solar cells10.1039/c1ee01072g ↗
15. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
16. “Plastic” solar cells: self-assembly of bulk heterojunction nanomaterials by spontaneous phase separation10.1021/ar900065j ↗
17. Influence of blend microstructure on bulk heterojunction organic photovoltaic performance10.1039/C0CS00045K ↗
18. A metal-oxide interconnection layer for polymer tandem solar cells with an inverted architecture10.1002/adma.201001033 ↗
19. Dual plasmonic nanostructures for high performance inverted organic solar cells10.1002/adma.201200120 ↗
20. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
21. Three-dimensional bulk heterojunction morphology for achieving high internal quantum efficiency in polymer solar cells10.1002/adfm.200900183 ↗
22. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
23. Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells10.1039/c2ee02806a ↗
24. Water-soluble polyfluorenes as an interfacial layer leading to cathode-independent high performance of organic solar cells10.1002/adfm.200902386 ↗
25. High-efficiency polymer photovoltaic cells using a solution-processable insulating interfacial nanolayer: the role of the insulating nanolayer10.1039/c2jm35016e ↗
26. Controlling surface enrichment in polymeric hole extraction layers to achieve high-efficiency organic photovoltaic cells10.1002/cssc.201200202 ↗
27. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
28. A new class of small bandgap organic polymer conductors10.1007/BF00558045 ↗
29. Processable low-bandgap polymers for photovoltaic applications10.1021/cm1021855 ↗
30. π-conjugated polymers for organic electronics and photovoltaic cell applications10.1021/cm102419z ↗
31. Optimal ambipolar charge transport of thienylenevinylene-based polymer semiconductors by changes in conformation for high-performance organic thin film transistors and inverters10.1021/cm303908f ↗
32. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
33. Synthetic principles for bandgap control in linear π-conjugated systems10.1021/cr950257t ↗
34. Soluble narrow band gap and blue propylenedioxythiophene-cyanovinylene polymers as multifunctional materials for photovoltaic and electrochromic applications10.1021/ja061274a ↗
35. Design, synthesis, and characterization of ladder-type molecules and polymers. Air-stable, solution-processable n-channel and ambipolar semiconductors for thin-film transistors via experiment and theory10.1021/ja809555c ↗
36. Introduction of a conjugated side chain as an effective approach to improving donor–acceptor photovoltaic polymers10.1039/c2ee23383e ↗
37. Diketopyrrolopyrrole-based semiconducting polymer for photovoltaic device with photocurrent response wavelengths up to 1.1μm10.1021/ma902398q ↗
38. Synthesis and photovoltaic properties of diketopyrrolopyrrole-based donor−acceptor copolymers10.1021/cm901487f ↗
39. Synthesis and photovoltaic properties of a novel low band gap polymer based on N-substituted dithieno[3,2-b:2′,3-d]pyrrole10.1021/ma802052w ↗
40. Synthesis and characterization of a low bandgap conjugated polymer for bulk heterojunction photovoltaic cells10.1002/1616-3028(200108)11:4<255::AID-ADFM255>3.0.CO;2-I ↗
41. High mobility organic thin film transistor and efficient photovoltaic devices using versatile donor–acceptor polymer semiconductor by molecular design10.1039/c1ee01213d ↗
42. Linear side chains in benzo[1,2-b:4,5-b′]dithiophene−thieno[3,4-c]pyrrole-4,6-dione polymers direct self-assembly and solar cell performance10.1021/ja400365b ↗
43. Bulk heterojunction solar cells using thieno[3,4-c]pyrrole-4,6-dione and dithieno[3,2-b:20,30-d]silole copolymer with a power conversion efficiency of 7.3%10.1021/ja200314m ↗
44. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
45. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
46. Dithienogermole as a fused electron donor in bulk heterojunction solar cells10.1021/ja204056m ↗
47. Synthesis of 5H-dithieno[3,2-b:2′,3′-d] pyran as an electron-rich building block for donor−acceptor type low-bandgap polymers10.1021/ma400452j ↗
48. Thermally stable efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
49. Morphology of polymer/fullerene bulk heterojunction solar cells10.1039/B510618B ↗
50. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
51. “Solvent annealing” effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes10.1002/adfm.200600624 ↗
52. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
53. Solvent additives and their effects on blend morphologies of bulk heterojunctions10.1039/C0JM01976C ↗
54. Improved performance of polymer bulk heterojunction solar cells through the reduction of phase separation via solvent additives10.1002/adma.200903677 ↗
55. Processing additives for improved efficiency from bulk heterojunction solar cells10.1021/ja710079w ↗
56. Enhanced open circuit voltage and efficiency of donor−acceptor copolymer solar cells by using indene-C60 bisadduct10.1021/cm300355e ↗
57. Bithiopheneimide−dithienosilole/dithienogermole copolymers for efficient solar cells: information from structure−property−device performance correlations and comparison to thieno[3,4-c]pyrrole-4,6-dione analogues10.1021/ja3081583 ↗
58. Improved performance of molecular bulk-heterojunction photovoltaic cells through predictable selection of solvent additives10.1002/adfm.201102456 ↗
59. Fast-grown interpenetrating network in poly(3-hexylthiophene): methanofullerenes solar cells processed with additive10.1021/jp810798z ↗
60. High efficiency polymer solar cells based on poly(3-hexylthiophene)/indene-C70 bisadduct with solvent additive10.1039/c2ee21481d ↗
61. Synthesis of an alternating thienylenevinylene–benzothiadiazole copolymer with high hole mobility for use in organic solar cells10.1016/j.orgel.2010.08.004 ↗
62. Bulk heterojunction organic solar cells based on soluble poly(thienylene vinylene) derivatives10.1016/j.orgel.2008.05.014 ↗
63. Synthesis and characterization of low-band-gap poly(thienylenevinylene) derivatives for polymer solar cells10.1039/c1jm10593k ↗
64. Efficient phthalimide copolymer-based bulk heterojunction solar cells: how the processing additive influences nanoscale morphology and photovoltaic properties10.1002/aenm.201100718 ↗
65. Tuning the properties of polymer bulk heterojunction solar cells by adjusting fullerene size to control intercalation10.1021/nl9023808 ↗
66. Bimolecular crystals of fullerenes in conjugated polymers and the implications of molecular mixing for solar cells10.1002/adfm.200801684 ↗
67. A new terthiophene-thienopyrrolodione copolymer-based bulk heterojunction solar cell with high open-circuit voltage10.1002/aenm.201200350 ↗
68. Time-dependent morphology evolution by annealing processes on polymer:fullerene blend solar cells10.1002/adfm.200800968 ↗
69. The relation between open-circuit voltage and the onset of photocurrent generation by charge-transfer absorption in polymer: fullerene bulk heterojunction solar cells10.1002/adfm.200800056 ↗
70. Free energy control of charge photogeneration in polythiophene/fullerene solar cells: the influence of thermal annealing on P3HT/PCBM blends10.1002/adfm.200800727 ↗