Anti-solvent treatment time approach to high efficiency perovskite solar cells with temperature of coating environmental
Source abstract
Abstract
The fabrication conditions of the light absorber layer (organic-inorganic halide perovskite) have a very large effect on the device performance in perovskite solar cells. In case of using the 1-step anti-solvent treatment (AST), their show very different characteristics depending on the AST time, amount, and temperature, etc. Here, we determined the optimal AST time for the synthesis of perovskite light absorber layer in relation to the turbidity point (TP) of the precursor solution during spin coating according to the temperature inside the glovebox. The TP was examined according to the fluid flow of the host solvent, and it depended on various conditions, such as the temperature and substrate. The measured TP was almost identical to the estimated TP, and both tended to decrease as the internal temperature increased. The AST time and the internal temperature of the glovebox significantly affected the crystallinity and device performance of the perovskite, and the best device performance of 18.9% for a methylammonium lead iodide (MAPbI 3 ) solar cell with n-i-p normal planar structure was achieved by applying an AST time of 9.5 s at 25 °C. Drive-level capacitance profiling and thermal admittance spectroscopy results confirmed that the optimal AST time of 9.5 s yielded a minimum trap density of 2.1 × 10 15/cm 3, which was related to the trap states of MAPbI 3.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. All-inorganic Sn-based perovskite solar cells: status, challenges, and perspectives10.1002/cssc.202001680 ↗
2. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
3. Room-temperature, hydrochloride-assisted, one-step deposition for highly efficient and air-stable perovskite solar cells10.1002/adma.201601881 ↗
4. Photovoltaic performance of perovskite solar cells with different grain sizes10.1002/adma.201504144 ↗
5. An up-scalable approach to CH3NH3PbI3 compact films for high-performance perovskite solar cells10.1016/j.nanoen.2015.05.027 ↗
6. Progress on perovskite materials and solar cells with mixed cations and halide anions10.1021/acsami.7b06001 ↗
7. Conformal quantum dot-SnO(2) layers as electron transporters for efficient perovskite solar cells10.1126/science.abh1885 ↗
8. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
9. A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells10.1002/anie.201405334 ↗
10. Photovoltaics. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
11. High-efficiency and stable perovskite solar cells prepared using chlorobenzene/acetonitrile antisolvent10.1021/acsami.9b12323 ↗
12. Protecting perovskite solar cells against moisture-induced degradation with sputtered inorganic barrier layers10.1021/acsaem.1c00816 ↗
13. Morphology-photovoltaic property correlation in perovskite solar cells: one-step versus two-step deposition of CH3NH3PbI310.1063/1.4891275 ↗
14. All sequential dip-coating processed perovskite layers from an aqueous lead precursor for high efficiency perovskite solar cells10.1038/s41598-018-20296-2 ↗
15. Air-assisted flow and two-step spin-coating for highly efficient CH3NH3PbI3perovskite solar cells10.7567/JJAP.55.02BF08 ↗
16. Steering the crystallization of perovskites for high-performance solar cells in ambient air10.1039/C9TA02566A ↗
17. Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers10.1126/science.aad1015 ↗
18. A general approach to high-efficiency perovskite solar cells by any antisolvent10.1038/s41467-021-22049-8 ↗
19. Perovskite solar cells fabricated by using an environmental friendly aprotic polar additive of 1,3-Dimethyl-2-imidazolidinone10.1186/s11671-017-2391-3 ↗
20. Accelerated formation and improved performance of CH3NH3PbI3-based perovskite solar cells via solvent coordination and anti-solvent extraction10.1039/C6TA10526B ↗
21. Dimethyl-sulfoxide-assisted improvement in the crystallization of lead-acetate-based perovskites for high-performance solar cells10.1039/C8TC01570H ↗
22. 20.8% slot-die coated MAPbI3 perovskite solar cells by optimal DMSO-content and age of 2-ME based precursor inks
23. Anti-solvent crystallization strategies for highly efficient perovskite solar cells10.3390/cryst7100291 ↗
24. Rapid hybrid perovskite film crystallization from solution10.1039/D0CS01272F ↗
25. Enhanced crystallization by methanol additive in antisolvent for achieving high-quality MAPbI3 perovskite films in humid atmosphere10.1002/cssc.201800625 ↗
26. Dynamics of antisolvent processed hybrid metal halide perovskites studied by in situ photoluminescence and its influence on optoelectronic properties10.1021/acsaem.9b02052 ↗
27. Understanding the effect of delay time of solvent washing on the performances of perovskite solar cells10.1021/acsomega.7b01026 ↗
28. From nano- to micrometer scale: the role of antisolvent treatment on high performance perovskite solar cells10.1021/acs.chemmater.6b05353 ↗
29. Characteristics of resist films produced by spinning10.1063/1.325357 ↗
30. Dynamics of polymer film formation during spin coating10.1063/1.4896674 ↗
31. From spin coating to roll-to-roll: investigating the challenge of upscaling lead halide perovskite solar cells10.1049/iet-rpg.2016.0683 ↗
32. Resolving spatial and energetic distributions of trap states in metal halide perovskite solar cells10.1126/science.aba0893 ↗
33. Unique properties of halide perovskites as possible origins of the superior solar cell performance10.1002/adma.201306281 ↗