journal article·2022-10

Investigating the role of copper in arsenic doped Cd(Se,Te) photovoltaics

Eric Colegrove, Brian Good, Ali Abbas, Helio Moutinho, Steve Johnston, Chun-Sheng Jiang, Patrick O'Keefe, John Michael Walls, David S. Albin, Matthew O. Reese

Publisher page

Abstract

The open circuit voltage (V OC ) deficit in Cd(Se,Te)-based photovoltaics remains a critical obstacle for pushing the technology closer to theoretical performance limits. Arsenic doping has become a dominant and promising route to achieve the higher p-type carrier concentrations necessary for higher V OC , but challenges associated with this alternate defect chemistry and higher doping density have hindered progress. Here we show that while arsenic doping enables high carrier concentrations (>10 16 cm −3), co-doping with copper can provide a boost to V OC without a significant change to carrier concentration. A large data set is initially used to explore current-voltage and capacitance-voltage trends associated with arsenic doped devices with and without copper. A smaller subset is then used to probe these trends using a wide variety of characterization techniques. Copper is found to facilitate reduced interface recombination and potentially improved bulk absorber characteristics, though the mechanisms for these improvements are not yet clear. Despite the improved performance of co-doped devices, V OC is still far below its potential especially for highly doped devices. Low emitter doping in conjunction with high absorber doping seems to be a plausible cause for this significant deficit, though other device properties may exacerbate this problem.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Solar cell efficiency tables (version 48)10.1002/pip.2788 ↗
2. Detailed balance limit of efficiency of p‐n junction solar cells10.1063/1.1736034 ↗
3. The roles of carrier concentration and interface, bulk, and grain-boundary recombination for 25% efficient CdTe solar cells10.1063/1.4984320 ↗
4. Interface engineering for 25% CdTe solar cells
5. Back-surface recombination, electron reflectors, and paths to 28% efficiency for thin-film photovoltaics: a CdTe case study10.1063/1.5063799 ↗
6. The role of back buffer layers and absorber properties for >25\% efficient CdTe solar cells10.1021/acsaem.9b00367 ↗
7. Impact of carrier concentration and carrier lifetime on MgZnO/CdSeTe/CdTe solar cells10.1109/JPHOTOV.2020.3017741 ↗
8. Roles of bandgrading, lifetime, band alignment, and carrier concentration in high-efficiency CdSeTe solar cells10.1063/5.0013726 ↗
9. Exceeding 20% efficiency with in situ group V doping in polycrystalline CdTe solar cells10.1038/s41560-019-0446-7 ↗
10. Understanding what limits the voltage of polycrystalline CdSeTe solar cells10.1038/s41560-022-00985-z ↗
11. Passivation, conductivity, and selectivity in solar cell contacts: concepts and simulations based on a unified partial-resistances framework10.1063/1.5117201 ↗
12. Tailoring SnO2, (Mg,Zn)O, and Ga:(Mg,Zn)O electro-optical properties and stability for solar cells10.1088/1361-6463/abb901 ↗
13. Experimental and theoretical comparison of Sb, As, and P diffusion mechanisms and doping in CdTe10.1088/1361-6463/aaa67e ↗
14. Overcoming carrier concentration limits in polycrystalline CdTe thin films with in situ doping10.1038/s41598-018-32746-y ↗
15. Recombination velocity less than 100 cm/s at polycrystalline Al2O3/CdSeTe interfaces10.1063/1.5030870 ↗
16. Microsecond carrier lifetimes in polycrystalline CdSeTe heterostructures and in CdSeTe thin film solar cells
17. Identification of recombination Losses in CdSe/CdTe solar cells from spectroscopic and microscopic time-resolved photoluminescence10.1002/solr.202170042 ↗
18. Robust passivation of CdSeTe based solar cells using reactively sputtered magnesium zinc oxide10.1016/j.solmat.2021.111388 ↗
19. CdTe-based solar cells with variations in Mg concentration in the MgZnO emitter10.1002/solr.202100126 ↗
20. Development of Cu‐doped ZnTe as a back‐contact interface layer for thin‐film CdS/CdTe solar cells10.1116/1.580394 ↗
21. Carrier providers or killers: the case of Cu defects in CdTe10.1063/1.4986077 ↗
22. The nanoscale distribution of copper and its influence on charge collection in CdTe solar cells10.1016/j.nanoen.2021.106595 ↗
23. Thin-film solar cells with 19% efficiency by thermal evaporation of CdSe and CdTe10.1021/acsenergylett.9b02836 ↗
24. Study of thin film poly-crystalline CdTe solar cells presenting high acceptor concentrations achieved by in-situ arsenic doping10.1016/j.solmat.2019.02.025 ↗
25. Revealing the importance of front interface quality in highly doped CdSexTe1–x solar cells10.1021/acsenergylett.1c01846 ↗
26. Impact of dopant-induced optoelectronic tails on open-circuit voltage in arsenic-doped Cd(Se)Te solar cells10.1063/5.0018955 ↗
27. Low-temperature and effective ex situ group V doping for efficient polycrystalline CdSeTe solar cells10.1038/s41560-021-00848-z ↗
28. Comparative study of as and Cu doping stability in CdSeTe absorbers10.1016/j.solmat.2021.111012 ↗
29. Carrier density and lifetime for different dopants in single-crystal and polycrystalline CdTe10.1063/1.4966209 ↗
30. Numerical simulation of high-efficiency, scalable, all-back-contact Cd(Se,Te) solar cells10.1063/5.0009924 ↗
31. CdTe synthesis and crystal growth using the high-pressure Bridgman technique10.1016/j.jcrysgro.2019.125466 ↗
32. Determination of the impurity distribution in junction diodes from capacitance-voltage measurements
33. Electron backscatter diffraction and orientation imaging microscopy10.1179/mst.1997.13.1.69 ↗
34. Dual-wavelength time-resolved photoluminescence study of CdSexTe1-x surface passivation via MgyZn1-yO and Al2O310.1109/JPHOTOV.2021.3124169 ↗
35. Kelvin probe force microscopy10.1063/1.105227 ↗
36. Silicon pn junction imaging and characterizations using sensitivity enhanced Kelvin probe force microscopy10.1063/1.113780 ↗
37. Carrier separation and transport in perovskite solar cells studied by nanometre-scale profiling of electrical potential10.1038/ncomms9397 ↗
38. Effect of window-layer materials on p-n junction location in Cu(in,Ga)Se2 solar cells10.1109/JPHOTOV.2018.2874039 ↗
39. Electrical potential investigation of reversible metastability and irreversible degradation of CdTe solar cells10.1016/j.solmat.2022.111610 ↗
40. Deep Level Transient Fourier Spectroscopy (DLTFS)--A technique for the analysis of deep level properties10.1016/0038-1101(88)90071-8 ↗
41. Analysis of a novel CuCl2 back contact process for improved stability in CdTe solar cells10.1002/pip.3148 ↗
42. Direct evidence of enhanced chlorine segregation at grain boundaries in polycrystalline CdTe thin films via three-dimensional TOF-SIMS imaging10.1002/pip.2498 ↗
43. Kinetic simulations of Cu doping in chlorinated CdSeTe PV absorbers
44. Polycrystalline heterojunction solar cells: a device perspective10.1002/pssb.2221940105 ↗
45. Metastability and reliability of CdTe solar cells10.1088/1361-6463/aab1e1 ↗
46. Chemical trends of defect formation and doping limit in II-VI semiconductors: the case of CdTe10.1103/PhysRevB.66.155211 ↗
47. Research strategies toward improving thin-film CdTe photovoltaic devices beyond 20% conversion efficiency10.1016/j.solmat.2013.05.055 ↗
48. Beyond thermodynamic defect models: a kinetic simulation of arsenic activation in CdTe10.1103/PhysRevMaterials.2.103803 ↗
49. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗