journal article·2021-08Open access

Insights on the limiting factors of Cu2ZnGeSe4 based solar cells

I. Anefnaf, S. Aazou, Y. Sánchez, P. Vidal-Fuentes, R. Fonoll-Rubio, Kunal J. Tiwari, S. Giraldo, Z. Jehl Li-Kao, J. Andrade-Arvizu, M. Guc, E. Saucedo, Z. Sekkat

Abstract

Germanium-based wide band gap kesterite semiconductor Cu2ZnGe(S,Se)4 (CZGeSSe) is considered a very promising absorber compound as top cell in tandem devices. Autonomy to tailor the band gap from ~1.47 eV (Cu2ZnGeSe4-CZGeSe) to ~2.2 eV (Cu2ZnGeS4-CZGeS), as well as non-toxic constituents makes this compound a strong candidate for further scientific exploration. However, the record efficiency of Cu2ZnGeSe4 solar cells is still significantly lower than those of its predecessors Cu2ZnSn(SxSe1-x)4 (CZTSSe), Cu(In,Ga)Se2 (CIGS) and CdTe thin-film solar cells. The comprehensive understanding of the factors limiting the performance of Cu2ZnGeSe4 based solar cells is the purpose of this work, by combining a complete characterization of the morphological, structural, compositional and optoelectronic properties of Cu2ZnGeSe4 absorbers and devices. Besides, an in-depth investigation of the main limitations is carried out, specifically focusing on studying the origin of the large VOC deficit, the main recombination mechanisms, electric transport properties, band tails and possible Cu2ZnGeSe4/CdS band offset effects. The champion CZGeSe solar cell device reported in this work shows an efficiency of 6.5%, Voc of 606 mV, JSC of 17.8 mA/cm2 and FF of 60%. The results presented here demonstrate that the large voltage deficit of CZGeSe solar cells could be mainly ascribed to a Fermi level pinning at the interface, while modifications of the buffer layer to induce a “spike” at the p-n junction could be beneficial. Additionally, low carrier diffusion lengths and lifetimes, along with possible back contact recombination, are identified as the main culprits for the limited carrier collection for low-energy photons. Finally, some strategies are proposed to face and overcome most of these issues and to help improving the CZGeSe performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (78)

Show source-provided references
1. Emerging inorganic solar cell efficiency tables (Version 1)10.1088/2515-7655/ab2338 ↗
2. “Fabrication of 7.2% efficient CZTSSe solar cells using CZTS nanocrystals “10.1021/ja108427b ↗
3. Kesterite Cu2ZnSn(S,Se)4 solar cells with beyond 8% efficiency by a sol–gel and selenization process”10.1021/acsami.5b01151 ↗
4. Low band gap liquid-processed CZTSe solar cell with 10.1% efficiency10.1039/c2ee00056c ↗
5. Fabrication of a Cu2ZnSn(S,Se)4 photovoltaic device by a low-toxicity ethanol solution process”10.1021/am402558a ↗
6. “11.2% efficient solution processed kesterite solar cell with a low voltage deficit “10.1002/aenm.201500712 ↗
7. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
8. Why are kesterite solar cells not 20% efficient?10.1016/j.tsf.2012.12.089 ↗
9. Improving the open-circuit voltage of Cu2ZnSnSe4 thin film solar cells via interface passivation: open-circuit voltage of Cu2ZnSnSe4 thin film solar cells10.1002/pip.2864 ↗
10. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
11. Suns- V OC characteristics of high performance kesterite solar cells
12. The state and future prospects ofkesterite photovoltaics10.1039/c3ee41781f ↗
13. Prospects and performance limitations for Cu–Zn–Sn–S–Se photovoltaic technology
14. Classification of lattice defects in the KesteriteCu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
15. Progress and perspectives of thin film kesterite photovoltaic technology: a critical review10.1002/adma.201806692 ↗
16. Observation of antisite domain boundaries inCu2ZnSnS4 by atomic-resolution transmission electron microscopy10.1039/C6NR04185J ↗
17. Defect physics of the kesterite thin-film solar cell absorber Cu2ZnSnS4
18. Band tailing and efficiency limitation in kesterite solar cells”, Appl
19. The nature of electrostatic potential fluctuations in Cu2ZnSnS 4 and their role on photovoltaic device performance10.1088/1742-6596/471/1/012014 ↗
20. Modification of defects and potential fluctuations in slow-cooled and quenched Cu2ZnSnSe4 single crystals
21. On the origin of band-tails in kesterite10.1016/j.solmat.2017.11.005 ↗
22. “Cu-Zn disorder and band gap fluctuations in Cu2ZnSn(S,Se)4 : theoretical and experimental investigations: Cu-Zn disorder and band gap fluctuations in Cu2ZnSn(S,Se)4”10.1002/pssb.201552530 ↗
23. Loss mechanisms in hydrazine-processed Cu2ZnSn(Se,S)4 solar cells10.1063/1.3522884 ↗
24. “Reduced interface recombination in Cu2ZnSnS4 solar cells with atomic layer deposition Zn1−xSnxOy buffer layers”10.1063/1.4937998 ↗
25. Band alignments of different buffer layers (CdS, Zn(O,S), and In2S3) on Cu2ZnSnS410.1063/1.4873715 ↗
26. Lithium-doping inverts the nanoscale electric field at the grain boundaries in Cu 2 ZnSn(S,Se)4 and increases photovoltaic efficiency10.1039/C5CP04707B ↗
27. Towards a CdS/Cu2ZnSnS 4 solar cell efficiency improvement: a theoretical approach10.1063/1.4903826 ↗
28. Atomic-scale observation of oxygen substitution and its correlation with hole-transport barriers in Cu2ZnSnSe4 thin-film solar cells10.1002/aenm.201501902 ↗
29. Optical designs that improve the efficiency of Cu2ZnSn(S,Se)4 solar cells
30. A method to improve crystal quality of CZTSSe absorber layer10.1007/s10971-018-4708-9 ↗
31. Free-to-bound recombination in near stoichiometric Cu2ZnSnS4 single crystals10.1103/PhysRevB.86.045206 ↗
32. Cation substitution of solution-processed Cu2ZnSnS4 thin film solar cell with over 9% efficiency10.1002/aenm.201500682 ↗
33. Earth-abundant chalcogenide photovoltaic devices with over 5% efficiency based on a Cu2BaSn(S,Se) 4 absorber10.1002/adma.201606945 ↗
34. Photovoltaic materials and devices based on the alloyed kesterite absorber (Ag xCu 1- x)2 ZnSnSe 410.1002/aenm.201502468 ↗
35. Enhancement of open-circuit voltage of solution-processed Cu2ZnSnS4 solar cells with 7.2% efficiency by incorporation of silver”10.1021/acsenergylett.6b00509 ↗
36. V oc boosting and grain growth enhancing Ge-doping strategy for Cu2ZnSnSe4 photovoltaic absorbers10.1021/acs.jpcc.6b02315 ↗
37. How small amounts of Ge modify the formation pathways and crystallization of kesterites
38. Germanium alloyed kesterite solar cells with low voltage deficits10.1021/acs.chemmater.5b04806 ↗
39. Improved performance of Ge-alloyed CZTGeSSe thin-film solar cells through control of elemental losses: improved performance of CZTGeSSe solar cells10.1002/pip.2442 ↗
40. Cu2ZnSnSe4 -based solar cells with efficiency exceeding 10% by adding a superficial Ge nanolayer: the interaction between Ge and Na
41. Large efficiency improvement in Cu2ZnSnSe4 solar cells by introducing a superficial Ge nanolayer10.1002/aenm.201501070 ↗
42. Improvement of voltage deficit of Ge-incorporated kesterite solar cell with 12.3% conversion efficiency10.7567/APEX.9.102301 ↗
43. Ge-incorporated Cu2ZnSnSe4 thin-film solar cells with efficiency greater than 10%10.1016/j.solmat.2015.09.039 ↗
44. Optoelectronic properties of thin film Cu2ZnGeSe4 solar cells10.1016/j.solmat.2017.06.050 ↗
45. 7.6% CZGSe solar cells thanks to optimized CdS chemical bath deposition10.1002/pssa.201800043 ↗
46. Uncovering details behind the formation mechanisms of Cu2ZnGeSe4 photovoltaic absorbers10.1039/C9TC06728K ↗
47. Sn substitution by Ge: strategies to overcome the open-circuit voltage deficit of kesterite solar cells10.1021/acsaem.0c00763 ↗
48. Structural characterization of off-stoichiometric kesterite-type Cu2ZnGeSe4 compound semiconductors: from cation distribution to intrinsic point defect density10.1039/C7CE02090B ↗
49. Cu2ZnGeS4 thin films deposited by thermal evaporation: the impact of Ge concentration on physical properties10.1088/1361-6463/aaa7db ↗
50. Optimization of CdS buffer layer for high-performance Cu2ZnSnSe4 solar cells and the effects of light soaking: elimination of crossover and red kink: CdS and effects of light soaking: elimination of crossover and red kink10.1002/pip.2589 ↗
51. Discrimination and detection limits of secondary phases in Cu2ZnSnS4 using X-ray diffraction and Raman spectroscopy10.1016/j.tsf.2014.08.028 ↗
52. Point defects, compositional fluctuations, and secondary phases in non-stoichiometric kesterites
53. Air-stable in-plane anisotropic GeSe2 for highly polarization-sensitive photodetection in short wave regionz10.1021/jacs.8b01234 ↗
54. Raman scattering and infrared reflectivity in GeSe10.1016/0038-1098(76)90381-1 ↗
55. Growth of Ge microcrystals in SiO 2 thin film matrices: a Raman and electron microscopic study10.1143/JJAP.30.687 ↗
56. Optical properties of cubic-phase Cu2GeSe4 single crystal10.1063/1.4816051 ↗
57. Raman scattering and X-ray diffraction study in Cu2GeSe310.1016/j.ssc.2008.01.018 ↗
58. Polarized Raman scattering analysis of Cu2ZnSnSe4 and Cu2ZnGeSe4 single crystals10.1063/1.4830028 ↗
59. Fermi resonance in the phonon spectra of quaternary chalcogenides of the type Cu2ZnGeS410.1088/0953-8984/28/6/065401 ↗
60. “Optical properties of quaternary kesterite-type Cu2Zn(Sn1−xGex)S4 crystalline alloys: Raman scattering, photoluminescence and first-principle calculations”10.1039/C6RA13608G ↗
61. “ chemistry and dynamics of Ge in kesterite: toward band-gap-graded absorbers “10.1021/acs.chemmater.7b03416 ↗
62. Upper limit to the photovoltaic efficiency of imperfect crystals from first principles
63. Limitation factors for the performance of kesterite Cu2ZnSnS4 thin film solar cells studied by defect characterization10.1039/C5RA00069F ↗
64. “Theoretical analysis of effects of deep level, back contact, and absorber thickness on capacitance–voltage profiling of CdTe thin-film solar cells”10.1016/j.solmat.2012.01.003 ↗
65. “Bulk and metastable defects in CuIn1−xGaxSe2 thin films using drive-level capacitance profiling “10.1063/1.1633982 ↗
66. “ characterization of surface and heterointerface of Cu2ZnSn1– x Ge x Se4 for solar cell applications”10.1002/pssr.201900708 ↗
67. Cu2ZnSnSe4 solar cells with 10.6% efficiency through innovative absorber engineering with Ge superficial nanolayer: Cu2ZnSnSe4 solar cells with 10.6% efficiency10.1002/pip.2797 ↗
68. Over 10% efficient wide bandgap CIGSe solar cells on transparent substrate with Na predeposition treatment10.1002/solr.202000284 ↗
69. The recombination parameter J010.1016/j.egypro.2014.08.073 ↗
70. 10% Efficiency Cu2ZnSn(S,Se)4 thin film solar cells fabricated by magnetron sputtering with enlarged depletion region width10.1016/j.solmat.2016.02.002 ↗
71. Impact of Urbach energy on open-circuit voltage deficit of thin-film solar cells10.1016/j.solmat.2020.110502 ↗
72. Very small tail state formation in Cu2ZnGeSe410.1063/1.5031799 ↗
73. impact of Na dynamics at the Cu2ZnSn(S,Se)4/CdS interface during post low temperature treatment of absorbers10.1021/acsami.5b12243 ↗
74. CZTS solar cells and the possibility of increasing VOC using evaporated Al2O3 at the CZTS/CdS interface10.1016/j.solener.2020.02.009 ↗
75. “Achieving 11.95% efficient Cu2ZnSnSe4 solar cells fabricated by sputtering a Cu–Zn–Sn–Se quaternary compound target with a selenization process”10.1039/C9TA00385A ↗
76. “Temperature dependent current–voltage and admittance spectroscopy on heat-light soaking effects of Cu(In,Ga)Se2 solar cells with ALD-Zn(O,S) and CBD-ZnS(O,OH) buffer layers”10.1016/j.solmat.2015.06.044 ↗
77. Electronic properties of CuGaSe2-based heterojunction solar cells. Part I. Transport analysis
78. Thermally evaporated Cu2ZnSnS4 solar cells10.1063/1.3499284 ↗