Comprehensive energy balance analysis of photon-enhanced thermionic power generation considering concentrated solar absorption distribution
Source abstract
Abstract
The present article reports a comprehensive energy balance analysis of a photon-enhanced thermionic emission (PETE) device when it is used for concentrated solar power (CSP) generation. To this end, we consider a realistic PETE device composed of a boron-doped silicon emitter on glass and a phosphorus-doped diamond collector on tungsten separated by the inter-electrode vacuum gap. Depth-dependent spectral solar absorption and its photovoltaic and photothermal energy conversion processes are rigorously calculated to predict the PETE power output and energy conversion efficiency. Our calculation predicts that when optimized, the power output of the considered PETE device can reach 1.6 W/cm$^2$ with the energy conversion efficiency of $\sim$18 \% for 100$\times$ solar concentration, which is substantially lower than those predicted in previous works under ideal conditions. In addition, the photon-enhancement ratio is lower than 10 and decreases with the increasing solar concentration due to the photothermal heating of the emitter, suggesting that PETE may be an adequate energy conversion process for low-to-medium CSP below $\sim$100$\times$ concentration. These observations signify the importance of a rigorous energy balance analysis based on spectral and spatial solar absorption distribution for the accurate prediction of PETE power generation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal Radiation and Cooling Technologies · solar cell performance optimization · Advanced Thermodynamics and Statistical Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Hatsopoulos · 1973 · vol. 1
2. Hatsopoulos · 1979 · vol. 2
3. Photon-enhanced thermionic emission for solar concentrator systems10.1038/nmat2814 ↗
4. Nelson · 2003
5. General temperature dependence of solar cell performance and implications for device modelling10.1002/pip.496 ↗
6. Photon-enhanced thermionic emission from heterostructures with low interface recombination10.1038/ncomms2577 ↗
7. Thermally enhanced photoinduced electron emission from nitrogen-doped diamond films on silicon substrates10.1103/PhysRevB.90.121302 ↗
8. GaAs film for photon-enhanced thermionic emission solar harvesters10.1016/j.mssp.2013.10.009 ↗
9. Photon-enhanced thermionic emission from p-GaAs with nonequilibrium Cs overlayers10.1063/1.4904986 ↗
10. Temperature dependence of photon-enhanced thermionic emission from GaAs surface with nonequilibrium Cs overlayers10.1016/j.apsusc.2016.05.057 ↗
11. Diffusion-emission theory of photon enhanced thermionic emission solar energy harvesters10.1063/1.4747905 ↗
12. A model for emission yield from planar photocathodes based on photon-enhanced thermionic emission or negative-electron-affinity photoemission10.1063/1.4764106 ↗
13. GaAs, and InP as cathode materials for photon-enhanced thermionic emission solar cells10.1016/j.solmat.2014.12.021 ↗
14. Heterostructured cathode with graded bandgap window-layer for photon-enhanced thermionic emission solar energy converters10.1016/j.solmat.2014.09.027 ↗
15. High-efficiency AlxGa1-xAs/GaAs cathode for photon-enhanced thermionic emission solar energy converters10.1016/j.optcom.2017.12.027 ↗
16. Temperature-dependent analysis of solid-state photon-enhanced thermionic emission solar energy converter10.3390/en13071554 ↗
17. Efficiency of photon enhanced thermionic emission solar converters10.1016/j.solmat.2012.08.006 ↗
18. Loss mechanisms and back surface field effect in photon enhanced thermionic emission converters10.1063/1.4816256 ↗
19. Parametric optimum design of a photon-enhanced thermionic solar cell10.1016/j.solmat.2013.05.001 ↗
20. Material optimum choices and parametric design strategies of a photon-enhanced solar cell hybrid system10.1016/j.solmat.2014.04.038 ↗
21. Limit of efficiency for photon-enhanced thermionic emission vs. photovoltaic and thermal conversion10.1016/j.solmat.2015.05.001 ↗
22. Negative space charge effects in photon-enhanced thermionic emission solar converters10.1063/1.4926625 ↗
23. Photon-enhanced electron tunneling solar cells10.1016/j.energy.2016.05.083 ↗
24. Solar energy conversion with photon-enhanced thermionic emission10.1088/2040-8978/18/7/073001 ↗
25. Investigation of contact grid geometry for photon-enhanced thermionic emission (PETE) silicon based solar converters10.1016/j.solener.2016.03.066 ↗
26. Effects of nanoscale vacuum gap on photon-enhanced thermionic emission devices
27. Thermodynamic assessment of solar photon-enhanced thermionic conversion10.1016/j.apenergy.2018.04.044 ↗
28. Optimal design of the interelectrode space in a photon-enhanced thermionic emission solar cell10.1016/j.applthermaleng.2019.113758 ↗
29. Optically pumped cesium plasma neutralization of space charge in photon-enhanced thermionic energy converters10.1063/1.4767349 ↗
30. Space charge effects on the maximum efficiency and parametric design of a photon-enhanced thermionic solar cell10.1016/j.solmat.2013.11.008 ↗
31. Thermodynamics of photon-enhanced thermionic emission solar cells10.1063/1.4862535 ↗
32. Light-trapping in photon enhanced thermionic emitters10.1364/OE.23.0A1220 ↗
33. Fundamentals and applications of near-field radiative energy transfer10.5098/hmt.v4.1.3001 ↗
34. Effects of near-field photon tunneling on the performance of photon–enhanced thermionic emission energy conversion10.1016/j.jqsrt.2018.10.036 ↗
35. Performance analysis of near-field thermophotovoltaic devices considering absorption distribution10.1016/j.jqsrt.2007.08.022 ↗
36. Thermionic electron emission from low work-function phosphorus doped diamond films10.1016/j.diamond.2009.01.024 ↗
37. Poynting vector in transfer-matrix formalism for the calculation of light absorption profile in stratified isotropic optical media10.1364/OL.36.003960 ↗
38. Solution of near-field thermal radiation in one-dimensional layered media using dyadic Green's functions and the scattering matrix method10.1016/j.jqsrt.2009.05.010 ↗
39. Gubareff · 1960
40. Ultrasmall penetration depth in nanoscale thermal radiation10.1063/1.3238315 ↗
41. Patankar · 2018
42. Optical properties of soda lime silica glasses10.1016/0165-1633(85)90052-8 ↗
43. Nanoscale radiation heat transfer for silicon at different doping levels10.1016/j.ijheatmasstransfer.2005.09.037 ↗
44. Infrared properties of chemical-vapor deposition polycrystalline diamond windows10.1364/AO.37.005731 ↗
45. Optimal emitter-collector gap for thermionic energy converters10.1063/1.4707379 ↗
46. Thermophysical properties of quartz glass10.1007/BF00824797 ↗
47. Thermal conductivity of silicon from 300 to 1400 K10.1103/PhysRev.130.1743 ↗
48. Near-field enhanced thermionic energy conversion for renewable energy recycling10.1016/j.jqsrt.2017.04.033 ↗
49. Sze · 2006
50. The effect of space charge and initial velocities on the potential distribution and thermionic current between parallel plane electrodes10.1103/PhysRev.21.419 ↗
51. Electric tunnel effect between dissimilar electrodes separated by a thin insulating film10.1063/1.1729774 ↗
52. Refrigeration by combined tunneling and thermionic emission in vacuum: use of nanometer scale design10.1063/1.1365944 ↗
53. Transition voltage spectroscopy in vacuum break junction: the standard tunneling barrier model and beyond10.1002/pssb.201248034 ↗
54. Jensen · 2017
55. LEED, Auger and plasmon studies of negative electron affinity on Si produced by the adsorption of Cs and O10.1016/0039-6028(73)90216-1 ↗
56. Thermionic emission from the Si/Cs/O (100) surface10.1063/1.1663387 ↗
57. Further lowering of work function by oxygen adsorption on the K/Si (001) surface10.1103/PhysRevB.51.14802 ↗
58. Conversion of heat and light simultaneously using a vacuum photodiode and the thermionic and photoelectric effects10.1016/j.solmat.2004.01.020 ↗
59. Submicrometer-gap thermionic power generation based on comprehensive modeling of charge and thermal transport10.1103/PhysRevApplied.15.024062 ↗
60. Highly efficient selective metamaterial absorber for high-temperature solar thermal energy harvesting10.1016/j.solmat.2015.02.019 ↗
61. Metasurface broadband solar absorber10.1038/srep20347 ↗
62. Graphene-based highly efficient and broadband solar absorber10.1016/j.optmat.2019.109330 ↗
63. Colloid templated semiconductor meta-surface for ultra-broadband solar energy absorber10.1016/j.solener.2020.01.066 ↗
64. Six-junction III-V solar cells with 47.1% conversion efficiency under 143 Suns concentration10.1038/s41560-020-0598-5 ↗
65. Thermionic energy conversion for concentrating solar power10.1016/j.apenergy.2017.09.021 ↗
66. Thermionic emission and work function of multiwalled carbon nanotube yarns10.1103/PhysRevB.73.235412 ↗
67. Photo-thermionic effect in vertical graphene heterostructures10.1038/ncomms12174 ↗
68. Generalized high-energy thermionic electron injection at graphene interface10.1103/PhysRevApplied.12.014057 ↗
69. Graphene-based thermionic-thermoradiative solar cells: concept, efficiency limit, and optimum design10.1016/j.jclepro.2019.118444 ↗