Low-temperature processed bipolar metal oxide charge transporting layers for highly efficient perovskite solar cells
Source abstract
Abstract
Abstract Metal oxide charge carrier transporting materials have been incorporated in many ways in perovskite solar cells (PSCs) because of their excellent chemical stability, wide band gaps, and reasonable mobilities. Herein, we report a low-temperature solution-processed intercalation method for introducing metal oxides displaying bipolar transporting capability into PSCs. We intercalated p-type nickel oxide (NiO) with cesium carbonate (Cs2CO3) to function as hole and electron transport layers for inverted (p–i–n) and conventional planar (n–i–p) PSCs, respectively. When compared with the corresponding NiO-only hole transporting layer, the Cs2CO3-intercalated NiO layer displayed enhanced electron extraction without sacrificing its hole extraction capability. The power conversion efficiencies of the inverted and conventional planar PSCs reached as high as 12.08 and 13.98%, respectively. This approach not only realizes the bipolar extraction capacity of Cs2CO3-intercalated p-type metal oxides but also opens up a possible route for preparing interconnecting layers for tandem optoelectronics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations10.1038/nenergy.2017.102 ↗
2. Efficient, stable and scalable perovskite solar cells using poly (3-hexylthiophene)10.1038/s41586-019-1036-3 ↗
3. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
4. Long-range balanced electron-and hole-transport lengths in organic-inorganic CH3NH3PbI310.1126/science.1243167 ↗
5. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
6. https://www.nrel.gov/pv/assets/pdfs/best-research-cell-efficiencies-190416.pdf.
7. Surface passivation of perovskite film for efficient solar cells, Nat
8. A novel ball milling technique for room temperature processing of TiO2 nanoparticles employed as the electron transport layer in perovskite solar cells and modules,10.1039/C8TA00303C ↗
9. Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency10.1039/C5EE03874J ↗
10. PEDOT: PSS monolayers to enhance the hole extraction and stability of perovskite solar cells10.1039/C8TA05234D ↗
11. CH3NH3PbI3 perovskite/fullerene planar-heterojunction hybrid solar cells10.1002/adma.201301327 ↗
12. Doped hole transport layer for efficiency enhancement in planar heterojunction organolead trihalide perovskite solar cells10.1016/j.nanoen.2015.04.029 ↗
13. Perovskite-based hybrid solar cells exceeding 10% efficiency with high reproducibility using a thin film sandwich approach10.1002/adma.201304803 ↗
14. Recent progress in electron transport layers for efficient perovskite solar cells10.1039/C5TA09011C ↗
15. Moisture assisted perovskite film growth for high performance solar cells10.1063/1.4901510 ↗
16. Facile synthesis of composite tin oxide nanostructures for high-performance planar perovskite solar cells10.1016/j.nanoen.2019.03.044 ↗
17. Solution-processible crystalline NiO nanoparticles for high-performance planar perovskite photovoltaic cells10.1038/srep30759 ↗
18. High-efficiency low-temperature ZnO based perovskite solar cells based on highly polar, nonwetting self-assembled molecular layers10.1002/aenm.201701683 ↗
19. Solution-processed Cu2O and CuO as hole transport materials for efficient perovskite solar cells10.1002/smll.201501330 ↗
20. CuSCN-based inverted planar perovskite solar cell with an average PCE of 15.6%10.1021/acs.nanolett.5b00116 ↗
21. Ammoniated aqueous precursor ink processed copper iodide as hole transport layer for inverted planar perovskite solar cells, Solar Energy Mater
22. Room-temperature and solution-processed copper iodide as the hole transport layer for inverted planar perovskite solar cells10.1039/C6NR04288K ↗
23. Novel CdS hole-blocking layer for photostable perovskite solar cells10.1021/acsami.5b12336 ↗
24. Cu-based quaternary chalcogenide Cu2BaSnS4 thin films acting as hole transport layers in inverted perovskite CH3NH3PbI3 solar cells10.1039/C6TA08426E ↗
25. Chemical management for colorful, efficient, and stable inorganic–organic hybrid nanostructured solar cells10.1021/nl400349b ↗
26. Efficient and air-stable planar perovskite solar cells formed on graphene-oxide-modified PEDOT: PSS hole transport layer10.1007/s40820-017-0140-x ↗
27. Stable inverted planar perovskite solar cells with low-temperature-processed hole-transport bilayer10.1002/aenm.201700763 ↗
28. Stability/degradation of polymer solar cells, Solar Energy Mater
29. Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers10.1038/nnano.2015.230 ↗
30. Over 1.1 ev workfunction tuning of cesium intercalated metal oxides for functioning as both electron and hole transport layers in organic optoelectronic devices10.1002/adfm.201401969 ↗
31. Li · MoOx and V2Ox as hole and electron transport layers through functionalized intercalation in normal and inverted organic optoelectronic devices, Light: Sci. Appl. · 2015 · 4
32. p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells10.1073/pnas.0711990105 ↗
33. Hydrothermal synthesis of α-MoO3 nanorods via acidification of ammonium heptamolybdate tetrahydrate10.1021/cm0206237 ↗
34. Doping of the metal oxide nanostructure and its influence in organic electronics10.1002/adfm.200801639 ↗
35. Phosphorescent hybrid organic–inorganic light-emitting diodes10.1002/adma.200904018 ↗
36. A.R. bin Mohd Yusoff, J.-H. Youn, J. Jang, Inverted quantum-dot light emitting diodes with cesium carbonate doped aluminium-zinc-oxide as the cathode buffer layer for high brightness10.1039/c3tc30505h ↗
37. Cesium doped NiOx as an efficient hole extraction layer for inverted planar perovskite solar cells10.1002/aenm.201700722 ↗
38. Cesium-doped vanadium oxide as the hole extraction layer for efficient perovskite solar cells10.1021/acsomega.7b01944 ↗
39. Cesium carbonate as a surface modification material for organic–inorganic hybrid perovskite solar cells with enhanced performance10.1039/C4RA08565E ↗
40. High-efficiency inverted polymer solar cells with transparent and work-function tunable MoO3-Al composite film as cathode buffer layer10.1002/adma.201200238 ↗
41. Aluminum doped zinc oxide for organic photovoltaics10.1063/1.3142423 ↗
42. Structural characterization of NiO doped with several caesium loadings10.1016/S1381-1169(96)00471-2 ↗
43. Efficacious engineering on charge extraction for realizing highly efficient perovskite solar cells10.1039/C7EE02685D ↗
44. A low-temperature, solution-processable, Cu-doped nickel oxide hole-transporting layer via the combustion method for high-performance thin-film perovskite solar cells, Adv
45. Breakthroughs in NiOx-HTMs towards stable, low-cost and efficient perovskite solar cells10.1016/j.nanoen.2018.06.082 ↗
46. Nickel oxide electrode interlayer in CH3NH3PbI3 perovskite/PCBM planar-heterojunction hybrid solar cells10.1002/adma.201306217 ↗
47. NiOx Electrode Interlayer and CH3NH2/CH3NH3PbBr3 Interface treatment to markedly advance hybrid perovskite-based light-emitting diodes10.1002/adma.201602974 ↗
48. Improvement of interfacial contacts for new small-molecule bulk-heterojunction organic photovoltaics10.1002/adma.201200963 ↗
49. Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%10.1038/nenergy.2016.142 ↗
50. Manipulating the mixed-perovskite crystallization pathway unveiled by in situ GIWAXS10.1002/adma.201901284 ↗
51. Unraveling the impacts induced by organic and inorganic hole transport layers in inverted halide perovskite solar cells10.1021/acsami.8b20924 ↗
52. Highly efficient thermally stable perovskite solar cells via Cs:NiOx/CuSCN double-inorganic hole extraction layer interface engineering10.1016/j.mattod.2019.01.017 ↗
53. Controlled synthesis of spin glass nickel oxide nanoparticles and evaluation of their potential antimicrobial activity: a cost effective and eco friendly approach10.1039/c3ra42628a ↗
54. Enhancing thermal oxidation stability of silver nanowire transparent electrodes by using a cesium carbonate-incorporated overcoating layer10.3390/ma12071140 ↗
55. Using a low temperature crystallization process to prepare anatase TiO2 buffer layers for air-stable inverted polymer solar cells10.1039/b922373h ↗
56. Highly efficient inverted bulk-heterojunction solar cells with a gradiently-doped ZnO layer10.1039/C5EE03045E ↗
57. Mixed solvents for the optimization of morphology in solution-processed, inverted-type perovskite/fullerene hybrid solar cells10.1039/c4nr00130c ↗
58. Planar p–n homojunction perovskite solar cells with efficiency exceeding 21.3%10.1038/s41560-018-0324-8 ↗
59. P-type mesoscopic nickel oxide/organometallic perovskite heterojunction solar cells10.1038/srep04756 ↗
60. A.B. Djurišić, J.A. Zapien, C. Surya, Characterization of low-frequency excess noise in CH3NH3PbI3-based solar cells grown by solution and hybrid chemical vapor deposition techniques10.1021/acsami.7b10091 ↗
61. Low temperature and rapid formation of high quality metal oxide thin film via a hydroxide-assisted energy conservation strategy10.1039/C8TC03544J ↗
62. Synthesis and characterization of nickel oxide doped barium strontium titanate ceramics10.1590/S0366-69132012000100016 ↗