Passivation via atomic layer deposition Al2O3 for the performance enhancement of quantum dot photovoltaics
Source abstract
Abstract
Abstract PbS colloidal quantum dot solar cells (CQDSCs) are promising photovoltaic devices with a broad spectral response, solution processability and long-term air stability. Recently, major progresses have been achieved in the performance enhancement of CQDSCs through the chemical surface passivation of CQDs and the device engineering. However, the p-type PbS-EDT hole extraction layer presents high surface-trap density, which induces charge recombination risk and blocks the hole extraction at the PbS-EDT/Au interface. Herein, we demonstrated a method to passivate the surface traps of PbS-EDT film by post-depositing an aluminum oxide (Al2O3) layer using atomic layer deposition (ALD) technology. The ALD progress was carefully controlled to ensure that ALD Al2O3 could overcoat and infill the PbS-EDT film at the same time. This ALD Al2O3 treatment efficiently passivated the surface traps of PbS-EDT and successfully kept the proper band alignment at PbS-TBAI/PbS-EDT interface for the fast hole extraction of CQDSCs. Consequently, this method allowed the efficient carrier extraction at the PbS-EDT/Au interface through suppressing trap-induced reverse Schottky barrier. A power conversion efficiency of 7.07% was finally obtained in the PbS CQDSCs with ALD Al2O3.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Enhancing quantum dot solar cells stability with a semiconducting single-walled carbon nanotubes interlayer below the top anode10.1002/admi.201801155 ↗
2. High-efficiency colloidal quantum dot photovoltaics via robust self-assembled monolayers10.1021/acs.nanolett.5b03677 ↗
3. Ligand-dependent exciton dynamics and photovoltaic properties of PbS quantum dot heterojunction solar cells10.1039/C6CP06561A ↗
4. Infrared colloidal quantum dots for photovoltaics: fundamentals and recent progress10.1002/adma.201001491 ↗
5. Passivation using molecular halides increases quantum dot solar cell performance10.1002/adma.201503657 ↗
6. Ligand cleavage enables formation of 1,2- ethanedithiol capped colloidal quantum dot solids10.1039/C9NR02708D ↗
7. PbS-quantum-dot-based heterojunction solar cells utilizing ZnO nanowires for high external quantum efficiency in the near-infrared region10.1021/jz4012299 ↗
8. Slow recombination in quantum dot solid solar cell using p-i-n architecture with organic p-type hole transport material10.1039/C5TA07111A ↗
9. Recombination suppression in PbS quantum dot heterojunction solar cells by energy-level alignment in the quantum dot active layers10.1021/acsami.7b06552 ↗
10. Hybrid passivated colloidal quantum dot solids10.1038/nnano.2012.127 ↗
11. Limiting factor of performance for solution-phase ligand-exchanged PbS quantum dot solar cell10.1016/j.solmat.2019.03.011 ↗
12. 2D matrix engineering for homogeneous quantum dot coupling in photovoltaic solids10.1038/s41565-018-0117-z ↗
13. Energy level modification in lead sulfide quantum dot thin films through ligand exchange10.1021/nn500897c ↗
14. Improved performance and stability in quantum dot solar cells through band alignment engineering10.1038/nmat3984 ↗
15. High-efficiency PbS quantum-dot solar cells with greatly simplified fabrication processing via “solvent-curing”10.1002/adma.201707572 ↗
16. Imbalanced charge carrier mobility and Schottky junction induced anomalous current-voltage characteristics of excitonic PbS colloidal quantum dot solar cells10.1016/j.solmat.2016.06.012 ↗
17. Quantification of deep traps in nanocrystal solids, their electronic properties, and their influence on device behavior10.1021/nl402803h ↗
18. Enhanced mobility-lifetime products in PbS colloidal quantum dot photovoltaics10.1021/nn2039164 ↗
19. The architecture of colloidal quantum dot solar cells: materials to devices10.1021/cr400299t ↗
20. 10.6% Certified colloidal quantum dot solar cells via solvent-polarity-engineered halide passivation10.1021/acs.nanolett.6b01957 ↗
21. Improved current extraction from ZnO/PbS quantum dot heterojunction photovoltaics using a MoO3 interfacial layer10.1021/nl201472u ↗
22. Eliminating fermi-level pinning in PbS quantum dots using an alumina interfacial layer10.1039/C5TC03945B ↗
23. Tailoring of the PbS/metal mnterface in qolloidal quantum dot solar cells for improvements of performance and air stability10.1039/C4EE00502C ↗
24. Role of defects and surface states in the carrier transport and nonlinearity of the diode characteristics in PbS/ZnO quantum dot solar cells10.1021/acsami.7b00141 ↗
25. Schottky solar cells based on colloidal nanocrystal films10.1021/nl802476m ↗
26. Graphene doping improved device performance of ZnMgO/PbS colloidal quantum dot photovoltaics10.1002/adfm.201505043 ↗
27. PbS colloidal quantum dot/ZnO‐based bulk‐heterojunction solar cells with high stability under continuous light soaking10.1002/pssr.201409461 ↗
28. Deposition mechanism of aluminum oxide on quantum dot films at atmospheric pressure and room temperature10.1021/acs.jpcc.5b11653 ↗
29. Highly efficient air-stable colloidal quantum dot solar cells by improved surface trap passivation10.1016/j.nanoen.2017.06.040 ↗
30. Suppressing deep traps in PbS colloidal quantum dots via facile iodide substitutional doping for solar cells with efficiency> 10%10.1021/acsenergylett.7b00091 ↗
31. Open-circuit voltage deficit, radiative sub-bandgap states, and prospects in quantum dot solar cells10.1021/acs.nanolett.5b00513 ↗
32. PbSe quantum dot field-effect transistors with air-stable electron mobilities above 7 cm2 V–1 s–110.1021/nl304753n ↗
33. The photothermal stability of PbS quantum dot solids10.1021/nn2033117 ↗
34. Robust, functional nanocrystal solids by infilling with atomic layer deposition10.1021/nl2028848 ↗
35. Electronic characterization of organic thin films by Kelvin probe force microscopy10.1002/adma.200501394 ↗
36. Scanning tunneling spectroscopy and Kelvin probe force microscopy investigation of Fermi energy level pinning mechanism on InAs and InGaAs clean surfaces10.1063/1.3462440 ↗
37. Influence of ligand exchange on the electrical transport properties of PbS nanocrystals10.1002/pssa.201532470 ↗
38. High performance PbS quantum dot/graphene hybrid solar cell with efficient charge extraction10.1021/acsami.6b02544 ↗
39. Colloidal quantum dot solar cells10.1021/acs.chemrev.5b00063 ↗
40. Interpretation of optoelectronic transient and charge extraction measurements in dye‐sensitized solar cells10.1002/adma.201201372 ↗
41. Improvement of photovoltaic performance of colloidal quantum dot solar cells using organic small molecule as hole-selective layer10.1021/acs.jpclett.7b00683 ↗
42. High reduction of interfacial charge recombination in colloidal quantum dot solar cells by metal oxide surface passivation10.1039/C4NR07521H ↗
43. The role of surface ligands in determining the electronic properties of quantum dot solids and their impact on photovoltaic figure of merits10.1039/C7NR06116A ↗