journal article·2017-08Open access

Tailoring anatase nanotubes for the photovoltaic device by the anodization process on behalf of microstructural features of titanium thin film

V. Mandić, M. Plodinec, I. Kereković, K. Juraić, V. Janicki, D. Gracin, A. Gajović, A. Moguš-Milanković, M.G. Willinger

Abstract

We prepared the anatase nanotubes (NT) and other nanostructured titania as electron accepting/transmitting layers in solar cells, using titanium anodization. Upon gaining control over the anodization, the parameters were held constant in order to observe the role of the deposited layers (by electron beam evaporation and magnetron sputtering) on the NT yield. The structural and microstructural parameters were investigated using FIB-FEG-SEM, XRD, Raman and GIXRD. Differences in the titanium layers play a significant role on the type of titania nanostructures achieved. Only dense homogeneous titanium layer surface, uniform in thickness and without cracks at macroscale, with uniformly seized isotropic nanoparticles, will enable uniform electrochemical etching and thus favourable, reproducible formation of the titania NT, and upon thermal treatment the anatase NT. Transparent conductive oxide (TCO) layers, which are not in direct contact to the NT, can also exhibit influence on the morphology of the titania NT charge transfer layer. In order to reach large uniform areas of nanotubes, which is required for solar cell application, the preparation of titanium layer has to be tailored.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Quantum Dots Synthesis And Properties · Ga2O3 and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Parameter estimation of solar photovoltaic (PV) cells: a review10.1016/j.rser.2016.03.049 ↗
2. Novel combination of efficient perovskite solar cells with low temperature processed compact TiO2 layer via anodic oxidation10.1021/acsami.6b02706 ↗
3. High-efficiency perovskite solar cells based on anatase TiO2 nanotube arrays10.1016/j.tsf.2015.12.001 ↗
4. Titanium dioxide nanomaterials: synthesis, properties, modifications, and applications10.1021/cr0500535 ↗
5. Review on dye-sensitized solar cells (DSSC): fundamental concepts and novel materials10.1016/j.rser.2012.04.044 ↗
6. Tuning photoresponse through size and shape control of CdSe-TiO2 architecture10.1021/ja0782706 ↗
7. Enhanced charge-collection efficiencies and light scattering in dye-sensitized solar cells using oriented TiO2 nanotubes arrays10.1021/nl062000o ↗
8. A critical review of recent developments in nanomaterials for photoelectrodes in dye sensitized solar cells10.1016/j.jpowsour.2016.03.016 ↗
9. Solar cell efficiency tables (version 44)
10. Synthesis, characterization and ab initio investigation of a panchromatic ullazine–porphyrin photosensitizer for dye-sensitized solar cells10.1038/nchem.1861 ↗
11. Photoelectrochemical properties of heterojunction CdTe/TiO2 electrodes constructed using highly ordered TiO2 nanotube arrays10.1021/cm8010666 ↗
12. Controlled growth of TiO2 nanotubes on conducting glass10.1021/cm102389m ↗
13. Kinetics of titania nanotube formation by anodization of titanium films10.1016/j.tsf.2010.10.004 ↗
14. Dye-sensitization of self-assembled titania nanotubes prepared by galvanostatic anodization of Ti sputtered on conductive glass10.1088/0957-4484/20/36/365601 ↗
15. TiO2 nanotube arrays by anodization of titanium film on conducting glass substrate
16. Fast formation of thick and transparent titania nanotubular films from sputtered Ti10.1016/j.elecom.2009.05.001 ↗
17. A facile route to aligned TiO2 nanotube arrays on transparent conducting oxide substrates for dye-sensitized solar cells10.1039/c0jm03689g ↗
18. General strategy for fabricating transparent TiO2 nanotube arrays for dye-sensitized photoelectrodes: illumination geometry and transport properties10.1021/nn200440u ↗
19. TiO2 nanotubes: self-organized electrochemical formation, properties and applications10.1016/j.cossms.2007.08.004 ↗
20. Self-organized TiO2 nanotubes prepared in ammonium fluoride containing acetic acid electrolytes10.1016/j.elecom.2005.04.008 ↗
21. Anodization fabrication of highly ordered TiO2 nanotubes10.1021/jp903037f ↗
22. TiO2 nanotubes: synthesis and application10.1002/anie.201001374 ↗
23. Anodic oxidation of titanium and TA6V alloy in chromic media. An electrochemical approach10.1016/S0013-4686(99)00283-2 ↗
24. Self-ordering electrochemistry: a review on growth and functionality of TiO2 nanotubes and other self-aligned MOx structures10.1039/b822726h ↗
25. TiO2 nanotubes: tailoring the geometry in H3PO4/HF electrolytes10.1016/j.elecom.2006.05.030 ↗
26. High-aspect-ratio TiO2 nanotubes by anodization of titanium10.1002/anie.200462459 ↗
27. 250 µm long anodic TiO2 nanotubes with hexagonal self-ordering10.1002/pssr.200600069 ↗
28. TiO2 nanotube arrays of 1000 μm length by anodization of titanium foil: phenol red diffusion10.1021/jp075258r ↗
29. Fabrication of complete titania nanoporous structures via electrochemical anodization of Ti10.1186/1556-276X-6-332 ↗
30. Impedance behavior of TiO2 nanotubes formed by anodization in NaF electrolytes10.1149/1.2898503 ↗
31. Effect of electric field strength on the length of anodized titania nanotube arrays10.1016/j.jelechem.2009.09.023 ↗
32. Influence of different fluoride containing electrolytes on the formation of self-organized titania nanotubes by Ti anodization10.1007/s10832-006-3904-0 ↗
33. Fabrication of highly ordered TiO2 nanotube arrays using an organic electrolyte10.1021/jp052736u ↗
34. Anodic formation of ordered TiO2 nanotube arrays: effects of electrolyte temperature and anodization potential10.1021/jp811201x ↗
35. Temperature influence on the anodic growth of self-aligned Titanium dioxide nanotube arrays10.1016/j.jmmm.2007.02.021 ↗
36. Effect of ultrasonic waves on the formation of TiO2 nanotubes by electrochemical anodization of titanium in glycerol and NH4F10.1380/ejssnt.2009.84 ↗
37. Influence of anodisation voltage on the dimension of titania nanotubes10.1016/j.jallcom.2009.12.093 ↗
38. Mechanistic aspects of the self-organization process for oxide nanotube formation on valve metals10.1149/1.3049342 ↗
39. Long vertically aligned titania nanotubes on transparent conducting oxide for high efficient solar cells10.1038/nnano.2009.226 ↗
40. Synthesis and applications of electrochemically self-assembled titania nanotube arrays10.1039/b924125f ↗
41. Recent advances in the use of TiO2 nanotube and nanowire arrays for oxidative photoelectrochemistry10.1021/jp809385x ↗
42. Application of non-metal doped titania for inverted polymer solar cells10.1063/1.4770490 ↗
43. Porous anodic alumina: fabrication, characterization and applications10.1016/S0040-6090(96)09440-0 ↗
44. Fabrication of tapered, conical-shaped titania nanotubes10.1557/JMR.2003.0362 ↗
45. Initiation and growth of self-organized TiO2 nanotubes anodically formed in NH4F/(NH4)2SO4 electrolytes10.1149/1.2008980 ↗
46. Formation of double-walled TiO2 nanotubes and robust anatase membranes10.1002/adma.200801189 ↗
47. Anodization of sputtered metallic films: the microstructural connection10.1016/j.scriptamat.2015.04.017 ↗
48. Solar-light photoamperometric and photocatalytic properties of quasi-transparent TiO2 nanoporous thin films10.1021/am100579g ↗
49. Application of highly-ordered TiO2 nanotube arrays in heterojunction dye sensitized solar cells10.1088/0022-3727/39/12/005 ↗
50. Raman spectrum of anatase, TiO210.1002/jrs.1250070606 ↗
51. Preparation of TiO2 nanotube on glass by anodization of Ti films at room temperature10.1016/S1003-6326(08)60251-4 ↗
52. Microstructural characterizations of magnetron sputtered Ti films on glass substrate10.1016/j.jmatprotec.2008.08.004 ↗
53. Properties of titanium thin films deposited by dc magnetron sputtering10.1016/j.msea.2006.06.020 ↗
54. Effects of radio-frequency plasma on structure and properties in Ti film deposition by dc and pulsed dc magnetron sputtering10.1016/j.tsf.2009.03.055 ↗
55. Influence of film thickness on texture and electrical properties of room temperature deposited nanocrystalline V2O5 thin films10.1063/1.2844438 ↗
56. Transparent highly ordered TiO2 nanotube arrays via anodization of titanium thin films10.1002/adfm.200500096 ↗
57. Synthesis of c-axis-oriented AlN thin films on high-conducting layers: al, Mo, Ti, TiN, and Ni10.1109/TUFFC.2005.1504003 ↗
58. Titanium film deposition by high-power impulse magnetron sputtering: influence of pulse duration10.1016/j.vacuum.2012.06.003 ↗
59. A lithographic approach to determine volume expansion factors during anodization: using the example of initiation and growth of TiO2-nanotubes10.1016/j.electacta.2009.05.064 ↗
60. Transparent titania nanotubes of micrometer length prepared by anodization of titanium thin film deposited on ITO10.1016/j.apsusc.2011.02.087 ↗
61. Anodization of Ti thin film deposited on ITO10.1021/la802456r ↗
62. Metallurgical aspects on the formation of self-organized anodic oxide nanotube layers10.1016/j.electacta.2009.02.038 ↗