Air-stable triarylamine-based amorphous polymer as donor material for bulk-heterojunction organic solar cells
Source abstract
Abstract
Abstract A new air-stable triarylamine-based amorphous polymer, TSP-T11, which consists of thiophene and triarylamine units, can be successfully utilized to fabricate bulk-heterojunction organic photovoltaics (OPVs) using PC60BM or PC70BM as acceptor materials. The highest level of performance of OPVs optimized at TSP-T11:PC70BM (weight ratios of 1:4) with thicknesses of 68 nm exhibited an open circuit voltage (Voc) of 0.75 V, a short circuit current (Jsc) of 8.03 mA cm−2, and a power-conversion efficiency (PCE) of 2.22% under simulated air mass 1.5 solar irradiation at 100 mW cm−2. Although TSP-T11 has a lower hole mobility (1.5×10−4 cm2 V−1 s−1) than P3HT, the use of amorphous film of TSP-T11 as a donor material for OPVs offers advantages over the use of polycrystalline film of P3HT in terms of its air-stability and pinhole-free homogeneous morphology.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Business, market and intellectual property analysis of polymer solar cells10.1016/j.solmat.2010.04.074 ↗
2. Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices10.1021/ar900061z ↗
3. Polymer solar cells: recent development and possible routes for improvement in the performance10.1016/j.solmat.2009.10.005 ↗
4. Solution-processed organic solar cells10.1557/mrs2008.138 ↗
5. Highly efficient inkjet-printed organic photovoltaic cells10.1143/JJAP.49.05EB03 ↗
6. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer10.1002/adma.200501825 ↗
7. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
8. Triphenylamine-fluorene alternating conjugated copolymers with pendant acceptor groups: synthesis, structure-property relationship, and photovoltaic application10.1021/ma900236h ↗
9. Synthesis and characterization of novel low-bandgap triphenylamine-based conjugated polymers with main-chain donors and pendant acceptors for organic photovoltaics10.1002/pola.24389 ↗
10. Benzothiadiazole-triphenylamine derivatives as donor materials for bulk-heterojunction organic solar cells10.2494/photopolymer.23.307 ↗
11. Solution processable donor materials based on thiophene and triphenylamine for bulk heterojunction solar cells10.1039/b9nj00431a ↗
12. Charge carrier transporting molecular materials and their applications in devices10.1021/cr050143+ ↗
13. Synthesis and carrier transport properties of triarylamine-based amorphous polymers for organic field-effect transistors10.1246/cl.2009.1040 ↗
14. TPA-PPEs - new alternating donor copolymers for potential application in photovoltaic devices10.1002/app.29184 ↗
15. Enhanced performance of bulk heterojunction solar cells using novel alternating phenylenevinylene copolymers of low band gap with cyanovinylene 4-nitrophenyls10.1021/ma100943t ↗
16. Alternating copolymers of carbazole and triphenylamine with conjugated side chain attaching acceptor groups: synthesis and photovoltaic application10.1021/ma101491c ↗
17. Organic field-effect transistors with gate dielectric films of poly-p-Xylylene derivatives prepared by chemical vapor deposition10.1143/JJAP.42.6614 ↗
18. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
19. Morphological study of P3HT:PCBM blend films prepared through solvent annealing for solar cell applications10.1016/j.solmat.2010.09.004 ↗
20. High-performance semiconducting polythiophenes for organic thin-film transistors10.1021/ja039772w ↗
21. Regiocontrolled synthesis of poly(3-alkylthiophenes) mediated by Rieke zinc: their characterization and solid-state properties10.1021/ja00106a027 ↗
22. Air stability of p-channel organic field-effect transistors based on oligo-p-phenylenevinylene derivatives10.1143/JJAP.47.1760 ↗
23. Origin of the open-circuit voltage of organic thin-film solar cells based on conjugated polymers10.1016/j.solmat.2008.09.022 ↗
24. Enhanced mobility of poly(3-hexylthiophene) transistors by spin-coating from high-boiling-point solvents10.1021/cm049617w ↗
25. Controlling electrical properties of conjugated polymers via a solution-based p-type doping10.1002/adma.200800735 ↗
26. Influence of processing conditions on the stability of poly(3-hexylthiophene)-based field-effect transistors10.1063/1.2208938 ↗
27. High performance polythiophene thin-film transistors doped with very small amounts of an electron acceptor10.1063/1.2883927 ↗
28. Organic complementary-like inverters employing methanofullerene-based ambipolar field-effect transistors10.1063/1.1812577 ↗
29. “Columnlike” structure of thecross-sectional morphology of bulk heterojunction materials10.1021/nl802821h ↗
30. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
31. An inter-laboratory stability study of roll-to-roll-coated flexible polymer solar modules10.1016/j.solmat.2011.01.010 ↗
32. Air stable polymer photovoltaics based on a process free from vacuum steps and fullerenes10.1016/j.solmat.2008.01.013 ↗
33. Thermocleavable low band gap polymers and solar cells therefrom with remarkable stability toward oxygen10.1021/ma801932a ↗
34. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
35. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
36. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
37. Water-induced degradation of polymer solar cells studied by H218O labeling10.1021/am800039w ↗
38. Lifetimes of organic photovoltaics: photochemistry, atmosphere effects and barrier layers in ITO-MEHPPV:PCBM-aluminium devices10.1016/j.solmat.2004.09.002 ↗
39. Effect of buffer layers on stability of polymer-based organic solar cells10.1143/JJAP.49.01AC02 ↗
40. Fullerene derivative acceptors for high performance polymer solar cells10.1039/C0CP01178A ↗