journal article·2013-10

The influence of cadmium sulfide and contact annealing configuration on the properties of high-performance cadmium stannate

D.M. Meysing, J.M. Burst, W.L. Rance, M.O. Reese, T.M. Barnes, T.A. Gessert, C.A. Wolden

Publisher page

Abstract

Abstract The sensitivity of cadmium stannate (CTO) performance to both sputtering and annealing conditions was investigated. Films treated by the standard proximity anneal in contact with a CdS film displayed an electrical resistivity of ~2.2×10−4 Ω cm, high mobility (~57 cm2/V s), and >90% transmission throughout the near infrared (λ≤1350 nm). Film properties were insensitive to annealing temperature and sputtering ambient when O2 was present during deposition. Next, we demonstrated process modifications to the proximity anneal. CTO and CTO/CdS bilayer films were annealed either uncovered or covered with a bare glass plate. CTO/CdS bilayers annealed in the covered configuration had comparable or superior conductivity to the proximity anneal, with optimal performance achieved with 10 nm of CdS. The resistivity of uncovered films and films produced without CdS was insensitive to CdS thickness (~3×10−4 Ω cm), and displayed higher mobility and improved transparency, particularly in the near infrared. The electrical properties were well correlated with X-ray diffraction measurements of film crystallinity and purity. These high-conductivity films are promising for photovoltaic applications, transmitting 92–95% of solar radiation >1 eV.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic and Structural Properties of Oxides · ZnO doping and properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Perspectives on the pathways for cadmium telluride photovoltaic module manufacturers to address expected increases in the price for tellurium10.1016/j.solmat.2012.03.023 ↗
2. Recent developments in RF sputtered cadmium stannate films10.1016/S0040-6090(95)08527-0 ↗
3. Comparison of different conducting oxides as substrates for CdS/CdTe thin film solar cells10.1016/S0040-6090(03)00239-6 ↗
4. Prospects of novel front and back contacts for high efficiency cadmium telluride thin film solar cells from numerical analysis10.1016/j.solmat.2010.02.042 ↗
5. X. Wu, R. Dhere, D. Albin, T. Gessert, C. Dehart, J. Keane, A. Duda, T. Coutts, S. Asher, D. Levi, High-efficiency CTO/ZTO/CdS/CdTe polycrystalline thin-film solar cells, in: Proceedings of the NCPV Program Review Meeting, 2001.
6. Solar cell efficiency tables (Version 41)10.1002/pip.2352 ↗
7. Studies on micro-structural and electrical properties of spray-deposited fluorine-doped tin oxide thin films from low-cost precursor10.1016/j.tsf.2004.09.022 ↗
8. High-efficiency polycrystalline CdTe thin-film solar cells10.1016/j.solener.2004.06.006 ↗
9. Properties of transparent conducting oxides formed from CdO and ZnO alloyed with SnO2 and In2O310.1116/1.580429 ↗
10. Cadmium tin oxide thin films deposited by RF magnetron sputtering for photovoltaic applications10.1016/j.jallcom.2012.12.146 ↗
11. T. Meng, B.E. McCandless, W.A. Buchanan, R.W. Birkmire, C.T. Hamilton, B.G. Aitken, C.A.K. Williams, Effect of annealing atmosphere and temperature on the properties of Cd2SnO4 thin films, in: Proceedings of the 38th IEEE PVSC, 2012, pp. 1803–1806.10.1109/PVSC.2012.6317943 ↗
12. Search for improved transparent conducting oxides: a fundamental investigation of CdO, Cd2SnO4, and Zn2SnO410.1116/1.1290371 ↗
13. Sputter deposition and characterization of Cd2SnO4 films10.1016/0040-6090(78)90075-5 ↗
14. Optical and electrical properties of Cd2SnO4: a defect semiconductor10.1103/PhysRevB.6.453 ↗
15. A spinel form of cadmium stannate10.1107/S0021889878013321 ↗
16. Transparent conducting oxide thin films of Cd2SnO4 prepared by RF magnetron co-sputtering of the constituent binary oxides10.1016/j.tsf.2005.01.097 ↗
17. S.D. Feldman-Peabody, J.A. Drayton, R.D. Gossman, M. Sadeghi, Methods of Forming a Conductive Transparent Oxide Film Layer for use in a Cadmium Telluride Based Thin Film Photovoltaic Device, U.S. Patent Application Number 20110244251, Assignee Primestar Solar, Inc., 2011.
18. Corning, Inc., Corning Eagle XG AMLCD Glass Substrates Material Information. 〈http://www.corning.com/displaytechnologies/en/products/eaglexg/index.aspx〉, 2006 (accessed 30.11.12).
19. University of Chicago, Alkali free borosilicate: Corning 7059. 〈http://psec.uchicago.edu/glass/Corning7059Properties.pdf〉, (accessed 26.11.13).
20. High-temperature structures of the rutile-type oxides, TiO2 and SnO2
21. Field-effect transistors based on single semiconducting oxide nanobelts10.1021/jp0271054 ↗
22. Hawleyite, isometric cadmium sulphide, a new mineral
23. X. Wu, R. Dhere, Y. Yan, I. Romero, Y. Zhang, J. Zhou, C. DeHart, A. Duda, C. Perkins, B. To, High-efficiency polycrystalline CdTe thin-film solar cells with an oxygenated amorphous CdS (a-CdS:O) window layer, in: Proceedings of the 29th IEEE PVSC, 2002, pp. 531–534.10.1109/PVSC.2002.1190619 ↗
24. ASTM International, Article G-173-03, Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface, 2012.
25. National Renewable Energy Laboratory, Reference Solar Spectral Irradiance: ASTM G-173. 〈http://rredc.nrel.gov/solar/spectra/am1.5/ASTMG173/ASTMG173.html〉, (accessed 30.1.13).
26. New figure of merit for transparent conductors10.1063/1.323240 ↗
27. Comparing the fundamental physics and device performance of transparent, conductive nanostructured networks with conventional transparent conducting oxides10.1002/aenm.201100608 ↗