journal article·2011-03

Sheet resistance characterization of laser-doped lines on crystalline silicon wafers for photovoltaic applications

Kee Soon Wang, Budi S. Tjahjono, Johnson Wong, Ashraf Uddin, Stuart R. Wenham

Publisher page

Abstract

Abstract An improved technique of measuring the upper sheet resistance ( R sheet ) limit of a single laser-doped (LD) line has been presented. Probing pads of a structure based on the transfer length method (TLM) principle are formed by laser doping without any further metallization step, forming a fast, simple, and inexpensive measurement technique that is applicable to both textured and planar silicon wafers with or without any silicon nitride (SiN x ) dielectric. It has been demonstrated that within the scope of using a laser to form lines with R sheet less than 15 Ω/□, this TLM method seems to be an accurate and reliable method to characterize the sheet resistance of a single laser-doped line. Investigations here also suggest that the sheet resistance of a laser-doped rectangular area (LD box) formed by overlapping multiple laser-doped lines on crystalline silicon wafers and measured using the four-point probe cannot accurately or reliably represent the sheet resistance of a single LD line that is laser doped under the same laser-scribing condition. This is mainly because of (1) the tendency of the high power laser to introduce electrically detrimental cracks onto the laser-doped box, (2) the unknown appropriate spacing between adjacent LD lines that should be used when forming the LD box, and (3) the ambiguity of overdoping that makes an LD box unsuitable to represent a single LD line at all. The TLM method proposed here not only avoids these problems but is also able to self-justify its own predicted upper limit values.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Integrated Circuits and Semiconductor Failure Analysis · Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. B.S. Tjahjono, J.H. Guo, Z. Hameiri, L. Mai, A. Sugianto, S. Wang, S.R. Wenham, High efficiency solar cell structures through the use of laser doping, in: Proceedings of the 22nd European PVSEC, 3–7 September 2007, Milan, Italy, pp. 966–969.
2. B.S. Tjahjono, S. Wang, A. Sugianto, L. Mai, Z. Hameiri, N. Borojevic, A. Ho-Baillie, S.R. Wenham, Application of laser doped contact structure on multicrystalline solar cells, in: Proceedings of the 23rd European PVSEC, 1–4 September 2008, Valencia, Spain, pp. 1995–2000.
3. Investigation of laser-fired rear-side recombination properties using an analytical model10.1002/pip.660 ↗
4. U. Besi-Vetrella, L. Pirozzi, E. Salza, G. Ginocchietti, F. Ferrazza, L. Ventura, A. Slaoui, J.C. Muller, Large area, screen printed silicon solar cells with selective emitter made by laser overdoping and RTA spin-on glasses, in: Proceedings of the IEEE 26th IEEE Photovoltaic Specialists Conference, June 1997, Anaheim, CA, USA, pp. 135–138.10.1109/PVSC.1997.654047 ↗
5. Laser assisted selective emitters & the role of laser doping
6. D. Kray, M. Alemán, A. Fell, S. Hopman, K. Mayer, M. Mesec, R. Müller, G.P. Willeke, S.W. Glunz, B. Bitnar, D.-H. Neuhaus, R. Ludemann, T. Schlenker, D. Manz, A. Bentzen, E. Sauar, A. Pauchard, B. Richerzhagen, Laser-doped silicon solar cells by laser chemical processing (LCP) exceeding 20% efficiency, in: Proceedings of the IEEE Photovoltaic Specialists Conference, 12–16 May 2008, San Diego, CA, pp. 1–3.10.1109/PVSC.2008.4922848 ↗
7. S. Hopman, A. Fell, K. Mayer, M. Aleman, M. Mesec, R. Muller, D. Kray, G. Willeke, Characterization of laser doped silicon wafers with laser chemical processing, in: Proceedings of the 22nd European PVSEC, 3–7 Sep 2007, Milan, Italy, pp. 1257–1261.
8. M. Abbott, Advanced laser processing and photoluminescence characterisation of high efficiency silicon solar cells, Ph.D. Thesis, School of Photovoltaic and Renewable Energy Engineering, University of New South Wales, Australia, 2006.10.1109/WCPEC.2006.279399 ↗
9. M. Morilla, R. Russell, J. Fernandez, Laser induced ablation and doping processes on high efficiency silicon solar cells, in: Proceedings of the 23rd European PVSEC, 1–4 September 2008, Valencia, Spain, pp. 1506–1509.
10. A. Sugianto, J. Bovatsek, S. Wenham, B. Tjahjono, G. Xu, Y. Yao, B. Hallam, X. Bai, N. Kuepper, C.M. Chong, R. Patel, 18.5% laser-doped solar cell on cz p-type silicon, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, 20–25 June 2010, San Diego, CA, pp. 689–694.10.1109/PVSC.2010.5616914 ↗
11. A. Grohe, A. Knorz, J. Nekarda, U. Jäger, N. Mingirulli, R. Preu, Novel laser technologies for crystalline silicon solar cell production, in: Proceedings of the SPIE Laser-based Micro- and Nanopackaging and Assembly III, vol. 7202, 24 February 2009, pp. 1–12.
12. L. Valdes, Resistivity measurements on germanium for transistor, in: Proceedings of the IRE, vol. 42, February 1954, pp. 420–427.10.1109/JRPROC.1954.274680 ↗
13. Measurement of sheet resistivity with the four-point probe10.1002/j.1538-7305.1958.tb03883.x ↗
14. A. Rodofili, S. Hopman, A. Fell, K. Mayer, M. Mesec, F. Granek, S. Glunz, Characterization of doping via laser chemical processing, in: Proceedings of the 24th European PVSEC, 21–25 September 2009, Hamburg, Germany, pp. 1727–1731.
15. S. Wang, B.S. Tjahjono, B. Hallam, A. Sugianto, M. Eadie, L. Mai, Z. Hameiri, S.R. Wenham, The use of silicon oxynitride on laser doped multicrystalline solar cells, in: Proceedings of the 24th European PVSEC, 21–25 September 2009, Hamburg, Germany, pp. 1632–1635.
16. C. Carlsson, A. Esturo-Breton, M. Ametowobla, J. Köhler, J. Werner, Laser doping for selective silicon solar cell emitter, in: Proceedings of the 21st European PVSEC, 4–8 September 2006, Dresden, Germany, pp. 938–940.
17. The use of silicon nitride in buried contact solar cells10.1016/S0927-0248(00)00153-7 ↗
18. Obtaining the specific contact resistance from transmission line model measurements10.1109/EDL.1982.25502 ↗
19. Laser assisted doping for photovoltaic applications10.2961/jlmn.2009.02.0003 ↗
20. Transient 3D/2D simulation of laser-induced ablation of silicon10.1007/s00339-008-4598-8 ↗
21. Fast simulation code for heating, phase changes and dopant diffusion in silicon laser processing using the alternating direction explicit (ADE) method10.1007/s00339-009-5416-7 ↗