Enhanced photocurrent generation by high molecular weight random copolymer consisting of benzothiadiazole and quinoxaline as donor materials
Source abstract
Abstract
Abstract We synthesized organic photovoltaic materials that have high molecular weight and good solubility. A new random copolymer named poly[carbazole-co-dithienylbenzothiadiazole-co-dithienylquinoxaline] (PC-TBT-TQ) was polymerized through the Suzuki coupling reaction. PC-TBT-TQ was dissolved in a common organic solvent, and its Mn indicates a high molecular weight of 216.2 kg/mol. According to the result of thermal analysis, very high thermal stability was observed, with an approximately 5 wt% weight loss at 440 °C. The optical band gap of PC-TBT-TQ (1.89 eV) is slightly higher than that of PCDTBT (1.87 eV). The HOMO and LUMO levels of PC-TBT-TQ (HOMO level: 5.45 eV, LUMO level: 3.56 eV) are similar to those of PCDTBT (HOMO level: 5.45 eV, LUMO level: 3.58 eV). The OPV properties of the polymer were assessed by fabricating bulk-heterojunction polymer solar cells in the ITO/PEDOT:PSS/active-layer/BaF2/Ba/Al structure. When PC-TBT-TQ and PC71BM were fabricated in a 1:4 ratio, the open-circuit voltage (VOC), short-circuit current (JSC), fill factor (FF) and power conversion efficiency (PCE) were 0.83 V, 9.5 mA/cm2, 43.3% and 3.5%, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Electroluminescence in conjugated polymers10.1038/16393 ↗
2. Polycondensation of dibromofluorene analogues with tetrafluorobenzene via direct arylation10.1021/ma1028517 ↗
3. Synthesis and electroluminescence properties of fluorene–anthracene based copolymers for blue and white emitting diodes10.1016/j.jiec.2011.02.038 ↗
4. Opto(electrical) properties of new aromatic polyazomethines with fluorene moieties in the main chain for polymeric photovoltaic devices10.1016/j.synthmet.2011.11.024 ↗
5. Efficient donor–acceptor type polymer semiconductors with well-balanced energy levels and enhanced open circuit voltage properties for use in organic photovoltaics10.1039/c1jm12145f ↗
6. Synthesis of quinoxaline-based donor−acceptor narrow-band-gap polymers and their cyclized derivatives for bulk-heterojunction polymer solar cell applications10.1021/ma1027164 ↗
7. Product integration of compact roll-to-roll processed polymer solar cell modules: Methods and manufacture using flexographic printing, slot-die coating and rotary screen printing10.1039/c0jm01178a ↗
8. Synthesis of novel narrow-band-gap copolymers based on [1,2,5]thiadiazolo[3,4-f]benzotriazole and their application in bulk-heterojunction photovoltaic devices10.1016/j.polymer.2012.02.014 ↗
9. Ito-free flexible polymer solar cells: from small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
10. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
11. Alignment and field-effect transistor behavior of an alternative π-conjugated copolymer of thiophene and 4-alkylthiazole10.1021/cm049825o ↗
12. New coplanar (aba)n-type donor−acceptor π-conjugated copolymers constituted of alkylthiophene (unit a) and pyridazine (unit b): synthesis using hexamethylditin, self-organized solid structure, and optical and electrochemical properties of the copolymers10.1021/cm051561y ↗
13. Poly(diketopyrrolopyrrole−terthiophene) for ambipolar logic and photovoltaics10.1021/ja907506r ↗
14. Prominent short-circuit currents of fluorinated quinoxaline-based copolymer solar cells with a power conversion efficiency of 8.0%10.1021/cm302861s ↗
15. Low band-gap polymers based on quinoxaline derivatives and fused thiophene as donor materials for high efficiency bulk-heterojunction photovoltaic cells10.1039/b823536h ↗
16. Synthesis and photovoltaic properties of a low-band-gap copolymer of dithieno[3,2-b:2′,3′-d]thiophene and dithienylquinoxaline10.1021/ma102722d ↗
17. Toward a rational design of poly(2,7-carbazole) derivatives for solar cells10.1021/ja0771989 ↗
18. Enhanced device performance of polymer solar cells by planarization of quinoxaline derivative in a low-bandgap polymer10.1039/c1jm10877h ↗
19. Conjugated polymer consisting of quinacridone and benzothiadiazole as donor materials for organic photovoltaics: coplanar property of polymer backbone10.1021/ma301466m ↗
20. The synthesis and electroluminescent properties of dithienylquinacridone-based copolymers for white light-emitting diodes10.1016/j.synthmet.2011.09.026 ↗
21. Photovoltaic response to structural modifications on a series of conjugated polymers based on 2-aryl-2h-benzotriazoles10.1002/pola.24959 ↗
22. Conjugated donor−acceptor copolymer semiconductors with large intramolecular charge transfer: synthesis, optical properties, electrochemistry, and field effect carrier mobility of thienopyrazine-based copolymers10.1021/ma061861g ↗
23. An easy and effective method to modulate molecular energy level of poly(3-alkylthiophene) for high-voc polymer solar cells10.1021/ma902197a ↗
24. Crystalline low-band gap polymers comprising thiophene and 2,1,3-benzooxadiazole units for bulk heterojunction solar cells10.1021/ma201848z ↗
25. Synthesis, characterization, and transistor response of semiconducting silole polymers with substantial hole mobility and air stability. Experiment and theory10.1021/ja800424m ↗
26. Effects of side chains on thiazolothiazole-based copolymer semiconductors for high performance solar cells10.1002/aenm.201100215 ↗
27. A new donor–acceptor–donor polyfluorene copolymer with balanced electron and hole mobility10.1002/adfm.200700441 ↗
28. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
29. Conjugated polymers consisting of quinacridone and quinoxaline as donor materials for organic photovoltaics: orientation and charge transfer properties of polymers formed by phenyl structures with a quinoxaline derivative10.1039/c3ta10512a ↗
30. Electron and hole mobility in solution-processed small molecule-fullerene blend: dependence on the fullerene content10.1063/1.4802922 ↗
31. Synthesis and photovoltaic properties of low-bandgap 4,7-dithien-2-yl-2,1,3-benzothiadiazole-based poly(heteroarylenevinylene)s10.1002/pola.24704 ↗
32. Dependence of regioregular poly(3-hexylthiophene) film morphology and field-effect mobility on molecular weight10.1021/ma047415f ↗