journal article·2019-10

Water diffusion simulation in photovoltaic module based on the characterization of encapsulant material using in-situ gravimetric technique

Akhilesh Dadaniya, Naresh Varma Datla

Publisher page

Abstract

Abstract Durability of photovoltaic (PV) module under outdoor exposure is predominantly controlled by the ambient humidity, temperature, and ultraviolet (UV) irradiation as well as the mechanical and thermal stresses. Outdoor exposure with multiple cycles of water absorption and desorption degrades the PV module materials as well as their interfaces. This water diffusion behavior, when characterized through reliable and realistic methods, can be used to accurately predict the water concentration within the PV module and thereby help to predict the water-induced degradation in PV module. An in-situ gravimetric method was used in this study to characterize the effects of temperature on the water diffusion behavior of ethylene vinyl acetate (EVA). Both water absorption and desorption in the EVA showed a simple Fickian behavior. The water diffusion and solubility coefficients determined from in-situ gravimetric experiments in the test range of 24°–50 °C reasonably fitted the Arrhenius rate equations with an activation energy of 30.64 kJ/mol and heat of solution −16.86 kJ/mol, respectively. Finally, the data from the in-situ gravimetric technique was used to simulate and compare the water diffusion within a glass-glass PV module laminate where exposed to accelerated and Delhi outdoor environments. Water penetration depth is limited to about 50 mm for the ten cycles of the humidity freeze test, while it extends to about 110 mm for both 1000 h of damp heat test and one-year outdoor environment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Building Energy and Comfort Optimization · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Degradation evaluation of crystalline-silicon photovoltaic modules after a few operation years in a tropical environment10.1016/j.solener.2014.02.006 ↗
2. Lifetime estimation of a photovoltaic module subjected to corrosion due to damp heat testing10.1115/1.4023101 ↗
3. Relation between degradation of polymeric components in a crystalline silicon PV module and climatic conditions: a literature review10.1016/j.solmat.2018.12.027 ↗
4. Analysis of degradation mechanisms of crystalline silicon PV modules after 12 years of operation in Southern Europe10.1002/pip.1083 ↗
5. Degradations of silicon photovoltaic modules: a literature review10.1016/j.solener.2013.07.005 ↗
6. Moisture transport, adhesion, and corrosion protection of PV module packaging materials10.1016/j.solmat.2006.04.003 ↗
7. Modeling of rates of moisture ingress into photovoltaic modules10.1016/j.solmat.2006.04.002 ↗
8. Simulation of water vapor ingress into PV-modules under different climatic conditions
9. Evaluation of moisture ingress from the perimeter of photovoltaic modules10.1002/pip.2374 ↗
10. Degradation of interfacial adhesion strength within photovoltaic mini-modules during damp-heat exposure
11. Accelerated and outdoor aging effects on photovoltaic module interfacial adhesion properties10.1002/pip.826 ↗
12. Encapsulation and backsheet adhesion metrology for photovoltaic modules10.1002/pip.2817 ↗
13. Adhesion strength study of EVA encapsulants on glass substrates
14. Adhesion and debonding kinetics of photovoltaic encapsulation in moist environments10.1002/pip.2657 ↗
15. Accelerated testing and failure of thin-film PV modules10.1002/pip.526 ↗
16. Environmental mechanisms of debonding in photovoltaic backsheets, Solar Energy Materials10.1016/j.solmat.2013.08.020 ↗
17. Characterization of ethylene vinyl acetate (EVA) encapsulant: effects of thermal processing and weathering degradation on its discoloration10.1016/0927-0248(92)90013-F ↗
18. Measurement of the glass transition temperature of crosslinked EVA encapsulant by thermal analysis for photovoltaic application10.1016/j.renene.2011.11.015 ↗
19. The effect of damp-heat and UV aging tests on the optical properties of silicone and EVA encapsulants10.1002/pip.1025 ↗
20. The causes and effects of degradation of encapsulant ethylene vinyl acetate copolymer (EVA) in crystalline silicon photovoltaic modules: a review10.1016/j.rser.2017.06.039 ↗
21. Encapsulation of PV modules using ethylene vinyl acetate copolymer as a pottant: a critical review10.1016/0927-0248(95)00150-6 ↗
22. Acetic acid production and glass transition concerns with ethylene-vinyl acetate used in photovoltaic devices10.1016/j.solmat.2006.10.009 ↗
23. Experimental characterization and simulation of water vapor diffusion through various encapsulants used in PV modules10.1016/j.solmat.2013.04.007 ↗
24. Temperature-dependent water vapour and oxygen permeation through different polymeric materials used in photovoltaic modules10.1002/pip.2273 ↗
25. Water sorption, desorption and transport in Nafion membranes10.1016/j.memsci.2007.06.022 ↗
26. Introduction to adhesion and adhesives10.1016/S1566-1369(01)80034-0 ↗
27. Simulation of water ingress into PV-modules: IEC-testing versus outdoor exposure10.1016/j.solener.2015.03.007 ↗
28. History of accelerated and qualification testing of terrestrial photovoltaic modules: a Literature Review10.1002/pip.861 ↗
29. Measurement of adhesive joint fracture properties as a function of environmental degradation10.1016/S0143-7496(98)00028-1 ↗
30. Humidity fixed points of binary saturated aqueous solutions
31. In-situ monitoring of moisture ingress in PV modules using digital humidity sensors10.1109/JPHOTOV.2016.2583779 ↗
32. Crank · 1979
33. ASTM F1249-13 · 2013
34. Assessing the outdoor operating temperature of photovoltaic modules10.1002/pip.813 ↗
35. Modeling of the nominal operating cell temperature based on outdoor weathering10.1016/j.solmat.2011.01.020 ↗
36. Measurement and modelling of water ingress into double-glass photovoltaic modules10.1002/pip.3069 ↗
37. A free‐volume interpretation of the influence of the glass transition on diffusion in amorphous polymers10.1002/app.1978.070220823 ↗
38. Experimental study of the effect of temperature on water solubility in natural rhyolite melt to 100 MPa10.1093/petroj/40.10.1497 ↗
39. Molecular modeling of the temperature dependence of solubility parameters for amorphous polymers10.1007/s00894-011-1249-3 ↗
40. Modelling of conditions for accelerated lifetime testing of Humidity impact on PV-modules based on monitoring of climatic data10.1016/j.solmat.2011.12.011 ↗
41. Hygrothermal degradation of two rubber-toughened epoxy adhesives: application of open-faced fracture tests10.1016/j.ijadhadh.2010.10.001 ↗