journal article·2018-05

High-efficiency, single-crystalline, p- and n-type Si solar cells: Microstructure and chemical analysis of the glass layer

Praveen Kumar, Zainul Aabdin, Michael Pfeffer, Oliver Eibl

Publisher page

Abstract

Abstract Recent investigations of the front side metallization of high-efficiency mono-crystalline Si solar cells proved that the glass layer formed at the Si/metallization interface during the screen printing plays an essential role for the charge transport, both in n- and p-type cells. High-efficiency cells (~ 18.0% for p-type and ~ 20% for n-type cells) show similar microstructure of the glass layer and similar temperature dependence of the series resistance. From this it is concluded that the microstructure of the glass layer determines the series and contact resistance of the front side metallization. The glass layers of high-efficiency cells contain a high density of nano-Ag colloids and other precipitates which reduce the contact resistance. A percolation model was proposed and is best suited to describe the charge transport in a dirty semiconductor containing metallic precipitates. Quantitative chemical composition of the glass layer of p- and n-type cells was investigated by Energy Dispersive X-ray (EDX) microanalysis in SEM and TEM. The chemical composition of the glass layer showed (SiOx)Pb, as main constitutes and Zn, Ti, Al, Ag, P and B as minor constituents with mole fractions above the detection limit of EDX. The glass layer is therefore considered to be a dirty semiconductor rather than a perfect insulator. The mole fractions of Zn (~ 1 at%) and Al (~ 1 at%) were quantitatively analyzed. Such analyses are important to correlate microstructural features with electrical properties of the front side metallization. We could prove that in p-type cells the efficiency of the cells correlated with the chemical composition of the glass layer. In n-type cells, with Al-containing pastes EDX spectroscopy yielded Al beyond the detection limit in the glass layer, whereas for Al free pastes the Al mole fraction was below the detection limit of EDX and yielded reduced efficiencies. In p-type cells pastes with enhanced Zn mole fraction yielding zinc oxide phases in the bulk Ag finger and Zn mole fractions up to 5 at% in the glass layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Effect of glass frit chemistry on the physical and electrical properties of thick-film Ag contacts for silicon solar cells10.1007/s11664-006-0311-x ↗
2. High-temperature contact formation on n-Type silicon: basic reactions and contact model for Seed-Layer contacts10.1002/adfm.200901305 ↗
3. Physical understanding of printed thick-film front contacts of crystalline Si solar cells-review of existing models and recent developments10.1016/j.solmat.2006.03.040 ↗
4. Silver thick-film contacts on highly doped n-type silicon emitters: structural and electronic properties of the interface10.1063/1.1562338 ↗
5. Comprehensive analysis of advanced solar cell contacts consisting of printed fine-line seed layers thickened by silver plating10.1002/pip.855 ↗
6. Contact formation of front side metallization in p-type, single crystalline Si solar cells: microstructure, temperature dependent series resistance and percolation model10.1016/j.solmat.2015.10.042 ↗
7. Combined microstructural and electrical characterization of metallization layers in industrial solar cells10.1016/j.egypro.2015.03.285 ↗
8. N-type single-crystalline Si solar cells: front side metallization for solar cells reaching 20% efficiency10.1016/j.solmat.2016.05.027 ↗
9. The nature of screen printed front side silver contacts−results of the project mikrosol10.1016/j.egypro.2013.11.085 ↗
10. Electron microscopy study of front-side Ag contact in crystalline Si solar cells10.1063/1.3086663 ↗
11. Microstructure characterization and current conduction mechanisms of front-side contact of n-type crystalline Si solar cells with Ag/Al pastes10.1063/1.4921544 ↗
12. R. Kopecek, T. Buck, J. Libal, R. Petres, K. Wambach, R. Kinderman, et al., Large area N-type multicrystalline silicon solar cells with b- emitter: efficiencies exceeding 14%, in: Proceedings of the International Photovoltaic Science and Engineering Conference, 2005, pp. 3–4.10.1109/WCPEC.2006.279319 ↗
13. Screen printing metallization of B emitters10.1002/pip.933 ↗
14. Formation of Ag/Al screen-printing contacts on B emitters10.1109/JPHOTOV.2014.2364117 ↗
15. Contacting boron emitters on n-type silicon solar cells with aluminium-free silver screen-printing pastes10.1002/pssr.201510443 ↗
16. Electrochemical nature of contact firing reactions for screen-printed silicon solar cells: origin of “gray finger” phenomenon10.1002/pip.2783 ↗
17. Electronic properties of nanoscale silver crystals at the interface of silver thick film contacts on n-type silicon10.1063/1.3508950 ↗
18. Experimental evidence of direct contact formation for the current transport in silver thick film metallized silicon emitters10.1063/1.3665718 ↗
19. Schottky barrier height—do we really understand what we measure?10.1116/1.586967 ↗
20. High efficiency, crystalline Si solar cells with screen printed front side metallization: a percolation model for explaning the current path10.1007/s11664-016-4818-5 ↗
21. Mechanism underlying the beneficial effect of forming gas annealing on screen-printed Ag contacts of crystalline Si solar cells10.1016/j.actamat.2014.02.023 ↗
22. Mechanism for the formation of Ag crystallites in the Ag thick-film contacts of crystalline Si solar cells10.1016/j.solmat.2008.10.021 ↗
23. Understanding the formation and temperature dependence of thick-film Ag contacts on high-sheet-resistance Si emitters for solar cells10.1149/1.2001507 ↗
24. Ohmic contact of conductive silver paste to silicon solar cells
25. Conductivity in transparent oxide semiconductors
26. Effect of the interface glass on electrical performance of screen printed Ag thick-film contacts of Si solar cells10.1016/j.tsf.2010.03.112 ↗
27. V.D. Mihailetchi, J. Jourdan, A. Edler, R. Kopecek, R. Harney, D. Stichtenoth, J. Lossen, T.S. Böscke, H.-.J. Krokoszinsk, Screen printed n-type silicon solar cells for industrial application, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference and Exhibition, 2010, pp. 6–10. doi:〈http://doi.org/10.4229/25thEUPVSEC2010-2DO.2.2〉.
28. Quantitative EDX microanalysis of Bi2Te3 in the TEM10.1002/pssa.200622579 ↗
29. Ternary, single-crystalline Bi2 (Te, Se)3 nanowires grown by electrodeposition10.1016/j.actamat.2016.11.057 ↗
30. PbSe mid-IR photoconductive thin films (Part I): phase analysis of the functional layer10.1016/j.jallcom.2017.06.330 ↗
31. Screen-printable silver pastes with metallic nano-zinc and nano-zinc alloys for crystalline silicon photovoltaic cells10.1021/am1011996 ↗
32. A.F. Carroll, K.W. Hang, B.J. Laughlin, K.R. Mikeska, Conductive compositions and processes for use in the manufacture of semiconductor devices: flux materials inventors, E.I. Dupont De Nemours and Company, United States patent US 8,187,505, 2012, May 29.
33. Direct imaging of dopant distributions across the Si-metallization interfaces in solar cells: correlative nano-analytics by electron microscopy and NanoSIMS10.1016/j.solmat.2016.11.004 ↗