Degradation of multijunction photovoltaic gridlines induced via thermal cycling
Source abstract
Abstract
Abstract A well-known but heretofore uncharacterized failure mechanism in multijunction photovoltaic cells involves the development of cracks in the top cell directly adjacent to metal gridline structures. In this study, we systematically explore the potential evolution of stress, grain size, roughness, and hardness of metal gridlines during thermal cycling as it pertains to top cell cracking behavior. We discover that although top cells are found to crack after many cycles, this is not due to an accumulation of stress or damage, but rather a progression of strain hardening within the metal gridlines due to cyclic plastic deformations, quantified as an increase in hardness of as much as 57%. Furthermore, optical and topological characterization reveals morphology changes at the gridlines’ top surfaces, lending some insight to commonly observed bus bar wire-bonding issues. Ultimately this suite of characterization techniques not only reveals the underlying behavior leading to gridline-induced top cell cracking failures in multijunction photovoltaics, but also suggests a route forward for the development of improved gridline materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: solar cell performance optimization · Silicon and Solar Cell Technologies · Semiconductor Quantum Structures and Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. III–V multijunction solar cells for concentrating photovoltaics10.1039/B809257E ↗
2. The potential of III-V semiconductors as terrestrial photovoltaic devices10.1002/pip.715 ↗
3. Editorial: toward 100 gigawatts of concentrator photovoltaics by 203010.1109/JPHOTOV.2013.2270341 ↗
4. R.R. King, A. Boca, W. Hong, X.Q. Liu, D. Bhusari, D. Larrabee, K.M. Edmondson, D.C. Law, M. Fetzer, S. Mesropian, N.H. Karam, Band-gap-engineered architectures for high-efficiency multijunction concentrator solar cells, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference and Exhibition, 2009, pp. 1–7.
5. T.N.D. Tibbits, P. Beutel, M. Grave, C. Karcher, E. Oliva, G. Siefer, A. Wekkeli, M. Schachtner, F. Dimroth, A.W. Bett, R. Krause, M. Piccin, N. Blanc, M. Muñoz-rico, C. Arena, E. Guiot, C. Charles-alfred, C. Drazek, New efficiency frontiers with wafer-bonded multi-junctions solar cells, in: Proceedings of the European PV Solar Energy Conference and Exhhibition, 2014, pp. 1–4.
6. P.J. Verlinden, A. Lewandowski, C. Bingham, G.S. Kinsey, R.A. Sherif, J.B. Lasich, Performance and reliability of multijunction III-V modules for concentrator dish and central receiver applications, in: Proceedings of the Conference Record of the 2006 IEEE 4th World Conference on Photovoltaic Energy Conversion, WCPEC-4, 1, 2007, pp. 592–597.10.1109/WCPEC.2006.279526 ↗
7. Spectral response and energy output of concentrator multijunction solar cells10.1002/pip.875 ↗
8. M.A. Quintana, D.L. King, T.J. McMahon, C.R. Osterwald, Commonly observed degradation in field-aged photovoltaic modules, in: Proceedings of the Conference Record of the Twenty-Ninth IEEE Photovoltaic Specialists Conference, 2002, 2002, pp. 1436–1439.10.1109/PVSC.2002.1190879 ↗
9. A.M. Reis, N.T. Coleman, M.W. Marshall, P.A. Lehman, C.E. Chamberlin, Comparison of PV module performance before and after 11-years of field exposure, in: Proceedings of the Conference Record of the Twenty-Ninth IEEE Photovoltaic Specialists Conference, 2002, 2002, pp. 1432–1435.10.1109/PVSC.2002.1190878 ↗
10. Photovoltaic module performance and durability following long-term field exposure10.1063/1.58001 ↗
11. C. Algora, P. Espinet, M. Vázquez, N.S. Bosco, D.C. Miller, S.R. Kurtz, F. Rubio, R. McConnell, Reliability, in: Handbook of Concentrator Photovoltaic Technology, John Wiley & Sons Inc, Hoboken, 2016.10.1002/9781118755655.ch09 ↗
12. High-irradiance degradation tests on concentrator GaAs solar cells10.1002/pip.487 ↗
13. Reliability of III-V concentrator solar cells10.1016/j.microrel.2010.07.045 ↗
14. J.A. Tsanakas, M. Karoglou, E.T. Delegou, P.N. Botsaris, A. Bakolas, A. Moropoulou, Assessment of the Performance and Defect Investigation of PV Modules after Accelerated Ageing Tests, in: Proceedings of the International Conference on Renewable Energies and Power Quality, Bilbao, Spain, 2013.10.24084/repq11.472 ↗
15. A novel approach of accelerated ageing tests for high concentration III–V multijunction solar cells through rapid irradiation/thermal cycles10.1016/j.solener.2015.03.033 ↗
16. Failure analysis on lattice matched GaInP/Ga(In)As/Ge commercial concentrator solar cells after temperature accelerated life tests10.1002/pip.2818 ↗
17. Reliability concerns associated with PV technologies
18. N.G. Dhere, Reliability of PV modules and balance-of-system components, in: Proceedings of the Conference Record of the IEEE Photovoltaic Specialists Conference, 2005, pp. 1570–1576.10.1109/PVSC.2005.1488445 ↗
19. Fabrication of high-efficiency III-V on silicon multijunction solar cells by direct metal interconnect10.1109/JPHOTOV.2014.2313225 ↗
20. Crack detection in photovoltaic cells by interferometric analysis of electronic speckle patterns10.1016/j.solmat.2011.10.034 ↗
21. Fatigue in ceramics10.1007/BF02265214 ↗
22. Fracture toughness of pure and in-doped GaAs10.1016/S0036-9748(88)80100-5 ↗
23. Wohlgemuth, S. Kurtz, Photovoltaic Module Qualification Plus Testing, in: Proceedings of the IEEE 40th Photovoltaic Specialist Conference, 2014, pp. 3589–3594.10.1109/PVSC.2014.6924883 ↗
24. Plastic properties of thin films on substrates as measured by submicron indentation hardness and substrate curvature techniques10.1557/JMR.1986.0845 ↗
25. Principles and applications of wafer curvature techniques for stress measurements in thin films10.1557/PROC-130-41 ↗
26. Comparison of the telephone cord delamination method for measuring interfacial adhesion with the four-point bending method10.1016/j.actamat.2004.10.014 ↗
27. Image processing with imageJ
28. Methods of determining the hardness of very hard materials: the hardness of diamond
29. Engineering Toolbox, 〈http://www.engineeringtoolbox.com/linear-expansion〉.
30. A model for boundary diffusion controlled creep in polycrystalline materials10.1063/1.1702656 ↗
31. Finite element simulation of thermal residual stresses in joining ceramics with thin metal interlayers10.1111/j.1151-2916.1998.tb02630.x ↗
32. The strength of ceramics bonded with metals10.1016/0001-6160(88)90304-5 ↗
33. Stress concentration factors10.1115/1.3423544 ↗