A stability study of roll-to-roll processed organic photovoltaic modules containing a polymeric electron-selective layer
Source abstract
Abstract
Abstract The stability of roll-to-roll processed organic photovoltaic modules having an inverted structure and incorporating polyethylenimine–ethoxylate (PEIE) as the electron-selective layer was investigated. Large-area modules were fabricated on ITO-coated PET substrates using roll-to-roll coating and printing methods. Modules were encapsulated with commercially-available ultra-high gas/vapor barrier films by employing new encapsulation protocols developed during this work. The operational lifetime of modules on storage in an environmental chamber at ambient temperature and relative humidity of 35 °C and 50%, respectively, and under continuous simulated AM1.5G illumination was found to increase by more than three orders of magnitude upon encapsulation. The chemical stability of the PEIE films under these storage conditions was also studied. Fracture tests were conducted on modules exposed to the same storage conditions to investigate the effects on inter- and intra-layer adhesion and cohesion. An increase in adhesive strength was found for the exposed devices indicating an absence of any substantial mechanical degradation of the deposited layers for the exposure conditions used during this work. The results described here demonstrate the potential utility of commercially-available PEIE as a convenient and effective organic electron-selective layer for the fabrication of durable roll-to-roll processed organic solar cell devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. An efficient triple-junction polymer solar cell having a power conversion efficiency exceeding 11%10.1002/adma.201402072 ↗
2. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
3. Roll-to-roll gravure printing of organic photovoltaic modulesinsulation of processing defects by an interfacial layer10.1002/pip.2508 ↗
4. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
5. Levelised cost of electricity for organic photovoltaics10.1016/j.solmat.2014.10.043 ↗
6. Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules10.1039/C4EE01223B ↗
7. 25th anniversary article: rise to power – OPV-based solar parks10.1002/adma.201302031 ↗
8. Degradation and stability of polymer-based solar cells10.1039/c2jm33645f ↗
9. New barrier encapsulation and lifetime assessment of printed organic photovoltaic modules
10. Over 2 years of outdoor operational and storage stability of ITO-free, fully roll-to-roll fabricated polymer solar cell modules10.1002/ente.201500086 ↗
11. Efficient solution-processed small-molecule solar cells with inverted structure10.1002/adma.201300295 ↗
12. Method to produce low-work function electrodes for organic electronics10.1126/science.1218829 ↗
13. High performance polymeric charge recombination layer for organic tandem solar cells10.1039/c2ee23294d ↗
14. Studies of the optimization of recombination layers for inverted tandem polymer solar cells10.1016/j.solmat.2012.08.004 ↗
15. 3D printer based slot-die coater as a lab-to-fab translation tool for solution-processed solar cells10.1002/aenm.201401539 ↗
16. Reverse gravure coating for roll-to-roll production of organic photovoltaics10.1016/j.solmat.2016.01.015 ↗
17. Influence of moisture out-gassing from encapsulant materials on the lifetime of organic solar cells10.1016/j.solmat.2014.09.030 ↗
18. Augmented double cantilever beam model for studying crack-propagation and arrest10.1007/BF00035958 ↗
19. The mechanism of burn-in loss in a high efficiency polymer solar cell10.1002/adma.201103010 ↗
20. Long-term stable polymer solar cells with significantly reduced burn-in loss10.1038/ncomms6688 ↗
21. Photooxidation of aliphatic amines under simulated atmospheric conditions: formation of nitrosamines, nitramines, amides, and photochemical oxidant10.1021/es60144a009 ↗
22. Photochemistry of aliphatic polyamides.4. Mechanisms of photooxidation of polyamide-6, polyamide-11, and polyamide-12 at long wavelengths10.1021/ma00157a015 ↗
23. S.R. Dupont, E. Voroshazi, P. Heremans, R.H. Dauskardt, The effect of anneal, solar irradiation and humidity on the adhesion/cohesion properties of P3HT:PCBM based inverted polymer solar cells, in: Proceedings of the Photovoltaic Specialists Conference (PVSC), 2012, pp. 003259–003262.10.1109/PVSC.2012.6318272 ↗
24. Thermal cycling effect on mechanical integrity of inverted polymer solar cells10.1016/j.solmat.2015.07.019 ↗
25. Interlayer adhesion in roll-to-roll processed flexible inverted polymer solar cells10.1016/j.solmat.2011.10.012 ↗
26. Molecular-controlled fracture and release of templated nanoporous organosilicate thin films10.1002/adma.200702665 ↗
27. Interfacial free energy driven nanophase separation in poly(3-hexylthiophene)/[6,6]-phenyl-c61-butyric acid methyl ester thin films10.1021/la300229u ↗
28. Surface characterization of photodegraded poly(ethylene terephthalate). The effect of ultraviolet absorbers10.1016/j.polymer.2004.02.003 ↗
29. Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene)10.1063/1.2008386 ↗
30. The consequences of interface mixing on organic photovoltaic device characteristics10.1002/adfm.201002014 ↗