Time-resolved fluorescence anisotropy study of organic lead halide perovskite
Source abstract
Abstract
The photoluminescent polarization properties of organic halide perovskites are of great importance for the fundamental understanding and for device fabrication, while limited relevant work has been published. In this work we investigate the fluorescence polarization properties of the CH3NH3PbI3, CH3NH3PbI3−xClx, and CH3NH3PbBr3 perovskites which have been used in some of the highly efficient solar device to date. Time-resolved fluorescence anisotropy measurements were conducted on these perovskites fabricated by different methods, and with or without the capping hole transport layer. We demonstrate that CH3NH3PbBr3 perovskite exhibits isotropic fluorescence polarization while CH3NH3PbI3 and CH3NH3PbI3−xClx perovskites exhibit anisotropic fluorescence polarization. The composition influences significantly fluorescence anisotropy dynamics while fabrication has relatively weaker influence. The hole transport capping layer can accelerate the decay of the fluorescence anisotropy. The symmetry of perovskite structure is proposed to be the key factor to impact the fluorescence anisotropy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Solid-state spectroscopy and crystallography · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Perovskites: the emergence of a new era for low-cost, high-efficiency solar cells10.1021/jz4020162 ↗
2. The emergence of perovskite solar cells10.1038/nphoton.2014.134 ↗
3. Perovskite solar cells: an emerging photovoltaic technology10.1016/j.mattod.2014.07.007 ↗
4. Perovskite solar cells: from materials to devices10.1002/smll.201402767 ↗
5. Small photocarrier effective masses featuring ambipolar transport in methylammonium lead iodide perovskite: a density functional analysis10.1021/jz4023865 ↗
6. Structure of methylammonium lead iodide within mesoporous titanium dioxide: active material in high-performance perovskite solar cells10.1021/nl403514x ↗
7. Synthesis and crystal chemistry of the hybrid perovskite (CH3NH3)PbI3 for solid-state sensitised solar cell applications10.1039/c3ta10518k ↗
8. First-principles study on the electronic and optical properties of cubic ABX3 halide perovskites10.1016/j.physleta.2013.11.018 ↗
9. Organometallic halide perovskites: sharp optical absorption edge and its relation to photovoltaic performance10.1021/jz500279b ↗
10. Arising applications of ferroelectric materials in photovoltaic devices10.1039/C3TA14188H ↗
11. Semiconducting tin and lead iodide perovskites with organic cations: phase transitions, high mobilities, and near-infrared photoluminescent properties10.1021/ic401215x ↗
12. Chemical management for colorful, efficient, and stable inorganic–organic hybrid nanostructured solar cells10.1021/nl400349b ↗
13. First-principles modeling of mixed halide organometal perovskites for photovoltaic applications10.1021/jp4048659 ↗
14. Hybrid lead halide iodide and lead halide bromide in efficient hole conductor free perovskite solar cell10.1021/jp5023407 ↗
15. The classification of tilted octahedra in perovskites10.1107/S0567740872007976 ↗
16. Perovskite oxides for visible-light-absorbing ferroelectric and photovoltaic materials10.1038/nature12622 ↗
17. Optical properties of CH3NH3PbX3 (X=halogen) and their mixed-halide crystals10.1023/A:1016584519829 ↗
18. Crystal structures, optical properties, and effective mass tensors of CH3NH3PbX3(X=I and Br) phases predicted from HSE0610.1021/jz500480m ↗
19. Halide perovskite materials for solar cells: a theoretical review10.1039/C4TA05033A ↗
20. Structural and electronic properties of hybrid perovskites for high-efficiency thin-film photovoltaics from first-principles10.1063/1.4824147 ↗
21. Stark effect in perovskite/TiO2 solar cells: evidence of local interfacial order10.1021/nl500544c ↗
22. Atomistic origins of high-performance in hybrid halide perovskite solar cells10.1021/nl500390f ↗
23. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells10.1038/ncomms6784 ↗
24. Anomalous hysteresis in perovskite solar cells10.1021/jz500113x ↗
25. Charge selective contacts, mobile ions and anomalous hysteresis in organic–inorganic perovskite solar cells10.1039/C4MH00238E ↗
26. Anomalously large interface charge in polarity-switchable photovoltaic devices: an indication of mobile ions in organic–inorganic halide perovskites10.1039/C4EE04064C ↗
27. Elucidation of perovskite film micro-orientations using two-photon total internal reflectance fluorescence microscopy10.1021/acs.jpclett.5b01474 ↗
28. High photoluminescence efficiency and optically pumped lasing in solution-processed mixed halide perovskite semiconductors10.1021/jz5005285 ↗
29. Impact of microstructure on local carrier lifetime in perovskite solar cells10.1126/science.aaa5333 ↗
30. Morphology and carrier extraction study of organic–inorganic metal halide perovskite by one- and two-photon fluorescence microscopy10.1021/jz502014r ↗
31. Lakowicz · 2006
32. Time-resolved fluorescence anisotropy measurements made simple10.1023/A:1022995327718 ↗
33. S.S. Vogel, C. Thaler, P.S. Blank, S.V. Koushik, Time resolved fluorescence anisotropy, In: FLIM Microscopy in Biology and Medicine, vol. 1, 2009, pp. 245–288.10.1201/9781420078916.ch10 ↗
34. Fluorescence anisotropy applied to biomolecular interactions10.1016/0076-6879(95)46014-4 ↗
35. Luminescence polarization of CdSe microcrystals10.1103/PhysRevB.46.7448 ↗
36. Identification of single molecules in aqueous solution by time-resolved fluorescence anisotropy10.1021/jp9833597 ↗
37. Fluorescence anisotropy: rapid, quantitative assay for protein-DNA and protein–protein interaction10.1016/S0076-6879(96)74039-9 ↗
38. Fluorescence anisotropy and crystal structure of individual semiconductor nanocrystals10.1021/jp027800b ↗
39. Absorption and fluorescence anisotropies of monoclinic crystals: the case of Nd:YCOB10.1364/OE.16.007997 ↗
40. Structural order of lipids and proteins in membranes - evaluation of fluorescence anisotropy data10.1073/pnas.76.12.6361 ↗
41. Gas-assisted preparation of lead iodide perovskite films consisting of a monolayer of single crystalline grains for high efficiency planar solar cells10.1016/j.nanoen.2014.08.015 ↗
42. Morphological control for high performance, solution-processed planar heterojunction perovskite solar cells10.1002/adfm.201302090 ↗
43. Methylammonium lead bromide perovskite-based solar cells by vapor-assisted deposition10.1021/jp512936z ↗
44. A review of the analysis of complex time-resolved fluorescence anisotropy data10.1088/2050-6120/3/2/022001 ↗
45. Modified two-step deposition method for high-efficiency TiO2/CH3NH3PbI3 heterojunction solar cells10.1021/am502131t ↗
46. Low-temperature solution-processed perovskite solar cells with high efficiency and flexibility10.1021/nn406020d ↗
47. Efficient planar heterojunction perovskite solar cells based on formamidinium lead bromide10.1021/jz501237m ↗
48. Defect trapping states and charge carrier recombination in organic–inorganic halide perovskites10.1039/C5TC03109E ↗
49. Electron–hole diffusion lengths exceeding 1μm in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
50. Structure and properties of CaTiO310.1107/S0365110X57000675 ↗
51. MAPbl(3–x)Cl–x mixed halide perovskite for hybrid solar cells: the role of chloride as dopant on the transport and structural properties10.1021/cm402919x ↗
52. Role of chloride in the morphological evolution of organo-lead halide perovskite thin films10.1021/nn5041922 ↗
53. Direct observation of an inhomogeneous chlorine distribution in CH3NH3PbI3−xClx layers: surface depletion and interface enrichment10.1039/C5EE00403A ↗
54. Polaronic exciton binding energy in iodide and bromide organic–inorganic lead halide perovskites10.1063/1.4936418 ↗
55. Additive enhanced crystallization of solution-processed perovskite for highly efficient planar-heterojunction solar cells10.1002/adma.201400231 ↗
56. MAPbI3−xClx mixed halide perovskite for hybrid solar cells: the role of chloride as dopant on the transport and structural properties10.1021/cm402919x ↗
57. Chloride in lead chloride-derived organo-metal halides for perovskite-absorber solar cells10.1021/cm503828b ↗
58. The role of chlorine in the formation process of “CH3NH3PbI3−xClx” perovskite10.1002/adfm.201401872 ↗