18.7% Efficient inline-diffused screen-printed silicon wafer solar cells with deep homogeneous emitter etch-back
Source abstract
Abstract
Abstract One of the critical fabrication processes of silicon wafer solar cells is the emitter formation. Tube based diffusion, using phosphorus oxychloride as the dopant source, is the standard in the photovoltaic industry. Inline-diffusion, using phosphoric acid as a dopant source, is a potentially low-cost alternative; however it typically results in lower solar cell efficiency. This paper presents an improved etch-back process, ‘SERIS etch’, for inline-diffused emitters, which achieves batch average efficiency of 18.6% using 156 mm pseudo-square industrial-grade p-type Cz mono-silicon wafers with conventional screen-printed metallisation and aluminium back surface field (Al-BSF). The best cell is 18.7% efficient, with an open-circuit voltage of 631 mV and a fill factor of 80.6%. These high efficiencies were achieved by co-optimisation of the emitter dopant profile and the emitter etch-back process. A variety of characterisation techniques, such as scanning electron microscopy, effective lifetime measurement, dopant profile analyser, photo- and electroluminescence images, and current–voltage (dark and illuminated) measurements were employed in this work.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. A. Ebong, B. Rounsaville, I.B. Cooper, K. Tate, A. Upadhyaya, A. Rohatgi, B. Bunkenburg, J. Cathey, S. Kim, D. Ruf, Optimizing the in-line emitters for higher high efficiency silicon solar cells, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC), Hamburg, 2009, pp. 1937–1940.
2. High efficiency in-line diffused emitter (ILDE) solar cells on mono-crystalline CZ silicon10.1002/pip.982 ↗
3. P.J. Richter, F.J. Bottari, D.C. Wong, PSG trapping of metal contaminants during belt furnace in-line phosphorous diffusion in crystalline Si wafers, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference (IEEE PVSC), Honolulu, 2010, pp. 3593–3597.10.1109/PVSC.2010.5614375 ↗
4. J. Hoornstra, W. Van Strien, M. Lamers, K. Tool, A. Weeber, High throughput in-line diffusion: emitter and cell results, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC), Milan, 2007, pp. 1586–1589.
5. J. Horzel, B. Schum, A. Lachowicz, J. Rossa, K. Vaas, M. Jahn, Y. Gassenbauer, H. Von Campe, H. Boubekeur, G. Blendin, U. Weber, A. Seidl, A. Armigliato, F. Seidel, T. Hantsche, On anomalous emitter regions forming during phosphorus diffusion processing of crystalline silicon solar cells, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference (EU PVSEC), Valencia, 2010, pp. 1882–1891.
6. C. Voyer, D. Biro, K. Wagner, J. Benick, R. Preu, Fabrication of textured solar cells using sprayed phosphoric acid as the dopant source for the in-line diffusion, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference (EU PVSEC), Dresden, 2006, pp. 1157–1160.
7. A.F. Stassen, M. Koppes, Y. Komatsu, A. Weeber, J. Hoogboom, J. Oosterholt, S. Ritmeijer, L. Groenewoud, Further improvements in surface modification of mc silicon solar cells: comparison of different post-PSG cleans suitable for in-line emitters, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference (EU PVSEC), Hamburg, 2009, pp. 1657–1659.
8. B. Rounsaville, A. Ebong, D.S. Kim, I.B. Cooper, A. Rohatgi, Tailoring the in-line diffused emitter (ILDE) profiles for high efficiency screen-printed silicon solar cells, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC), Valencia, 2010, pp. 2408–2411.
9. P.K. Basu, M.B. Boreland, V. Shanmugam, D. Sarangi, Non-acidic isotropic etch-back method for silicon wafer solar cells, US Prov. Appl. no. 61/644,730 2012.
10. 19% Efficient inline-diffused large-area screen-printed Al-LBSF silicon wafer solar cells10.1016/j.egypro.2012.07.091 ↗
11. Regulated low cost pre-treatment step for surface texturization of large area industrial single crystalline silicon solar cell10.1016/j.solmat.2010.02.025 ↗
12. Liquid silicate additive for alkaline texturing of mono-Si wafers to improve process bath lifetime and reduce IPA consumption10.1016/j.solmat.2013.01.037 ↗
13. F. Book, S. Braun, A. Herguth, A. Dastgheib-Shirazi, B. Raabe, G. Hahn, The etchback selective emitter technology and its application to multicrystalline silicon, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference (IEEE PVSC), Honolulu, 2010, pp. 1309–1314.10.1109/PVSC.2010.5614267 ↗
14. Series resistance effects on solar cell measurements10.1016/0365-1789(63)90063-8 ↗
15. Lumps, humps and bumps: three detrimental effects in the current–voltage curve of silicon solar cells