journal article·2021-10

Regulation of selenium composition by supercritical carbon dioxide for CZTSSe solar cells efficiency improvement

Hai-Qin Xiao, Wen-Hui Zhou, Dong-Xing Kou, Zheng-Ji Zhou, Yue-Na Meng, Ya-Fang Qi, Sheng-Jie Yuan, Li-Tao Han, Zhi Zheng, Si-Xin Wu

Publisher page

Abstract

Abstract Se-rich selenization offers remarkable benefits for grain growth of Cu2ZnSn(S,Se)4 (CZTSSe) absorber layers, which is critical for solar cells fabrication. However, low-activity selenium often forms Se-clusters and trapped in CZTSSe absorber layers. These trapped Se-clusters increase carrier recombination in CZTSSe absorber layers, thus decreasing efficiency of CZTSSe solar cells. Herein, supercritical carbon dioxide (SCCO2) treatment was demonstrated to regulate selenium composition of CZTSSe absorber layers for solar cells efficiency improvement. Compared with untreated CZTSSe absorber layers, selenium composition of CZTSSe absorber layers were significantly reduced by SCCO2 treatment. The open circuit voltage (VOC) and fill factor (FF) of CZTSSe solar cells improved pronouncedly due to carrier recombination reduction and carrier transport enhancement. As a consequence, the power conversion efficiency (PCE) was increased from 9.26 % (ref device) to 11.43 % (SCCO2 device). This unique SCCO2 treatment may offer new ideas for other selenization-based optoelectronic devices performance improvement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Investigation of low intensity light performances of kesterite CZTSe, CZTSSe, and CZTS thin film solar cells for indoor applications10.1039/D0TA04863A ↗
2. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
3. Zinc tin chalcogenide complexes and their evaluation as molecular precursors for Cu2ZnSnS4 (CZTS) and Cu2ZnSnSe4 (CZTSe)10.1021/acs.inorgchem.7b01697 ↗
4. Effect of solid-H2S gas reactions on CZTSSe thin film growth and photovoltaic properties of a 12.62% efficiency device10.1039/C9TA08310C ↗
5. 7.1% efficient co-electroplated Cu2ZnSnS4 thin film solar cells with sputtered CdS buffer layers10.1039/C5GC02057C ↗
6. High quality sustainable Cu2ZnSnSe4 (CZTSe) absorber layers in highly efficient CZTSe solar cells10.1039/C6GC02300B ↗
7. Engineering grain boundaries in Cu2ZnSnSe4 for better cell performance: a first-principle study10.1002/aenm.201300712 ↗
8. All solution-processed chalcogenide solar cells-from single functional layers towards a 13.8% efficient CIGS device10.1002/adfm.201402288 ↗
9. Significantly improving the crystal growth of a Cu2ZnSn(S,Se)4 absorber layer by air-annealing a Cu2ZnSnS4 precursor thin film10.1021/acsami.0c12630 ↗
10. 12.95% efficient Cu(In,Ga)Se2 solar cells by single-step atmospheric selenization, scaled to monolithically integrated modules10.1021/acsaem.0c02254 ↗
11. Growth and device characteristics of CZTSSe thin-film solar cells with 8.03% efficiency10.1021/acs.chemmater.5b01181 ↗
12. Influence of selenization atmosphere on the Cu2ZnSn(S,Se)4 thin films and its correlation to the performance of solar cells10.1016/j.materresbull.2017.05.053 ↗
13. Influence of H2Se concentration on Se-rich CZTSSe absorbers sputtered with a ceramic quaternary target10.1016/j.ceramint.2020.02.158 ↗
14. Equilibrium composition of selenium vapor; the thermodynamics of the vaporization of HgSe, CdSe, and SrSe10.1063/1.1727488 ↗
15. Comment on the composition of selenium vapor10.1063/1.1668677 ↗
16. Study on formation and characterization of CZTSSe-based absorber layer from a green solution based approach10.1016/j.solmat.2019.109959 ↗
17. Improved performance of Ge-alloyed CZTGeSSe thin-film solar cells through control of elemental losses10.1002/pip.2442 ↗
18. Modified back contact interface of CZTSe thin film solar cells: elimination of double layer distribution in absorber layer10.1002/advs.201700645 ↗
19. Uniform selenization of crack-free films of Cu(In,Ga)Se2 nanocrystals10.1021/acsaem.8b01800 ↗
20. Enhancing the performance of CZTSSe solar cells with Ge alloying10.1016/j.solmat.2012.05.039 ↗
21. Limiting effects of conduction band offset and defect states on high efficiency CZTSSe solar cell10.1016/j.nanoen.2017.12.031 ↗
22. Kinetics of the thermal decomposition of H2Se10.1016/0360-3199(81)90082-3 ↗
23. The influence of cracked selenium flux on CIGS thin film growth and device performance prepared by two-step selenization processes10.1016/j.solmat.2015.03.021 ↗
24. Performance enhancement of Cu2ZnSn(S,Se)4 solar cells by post selenization of absorber layer in thermal cracked selenium atmosphere10.1016/j.solmat.2020.110806 ↗
25. Engineered microbial biofuel production and recovery under supercritical carbon dioxide10.1038/s41467-019-08486-6 ↗
26. Supercritical CO2: a clean and low temperature approach to blending PDLLA and PEG10.1002/adfm.201101889 ↗
27. Clean block copolymer microparticles from supercritical CO2: universal templates for the facile and scalable fabrication of hierarchical mesostructured metal oxides10.1021/acs.nanolett.8b03044 ↗
28. Supercritical carbon dioxide-based technologies for the production of drug nanoparticles/nanocrystals-A comprehensive review10.1016/j.addr.2018.07.010 ↗
29. Ultra-violet light enhanced super critical fluid treatment in In-Ga-Zn-O thin film transistor10.1063/1.4883899 ↗
30. Enhancement of surface chemical and physical properties of germanium-sulfur thin film using a water-supplemented carbon dioxide supercritical fluid treatment technique10.1002/admi.201801105 ↗
31. Boosting the efficiency of solution-based CZTSSe solar cells by supercritical carbon dioxide treatment10.1039/D0GC01355B ↗
32. Persistent double-layer formation in kesterite solar cells: a critical review10.1021/acsami.0c10068 ↗
33. Rear-passivated ultrathin Cu(In,Ga)Se2 films by Al2O3 nanostructures using glancing angle deposition toward photovoltaic devices with enhanced efficiency10.1002/adfm.201905040 ↗
34. Synthesis of CZTS/Se and their solid solution from electrodeposited Cu–Sn–Zn metal precursor: a study of S and Se replacement reaction10.1021/acsaem.8b00527 ↗
35. Thermal-evaporated selenium as a hole-transporting material for planar perovskite solar cells10.1016/j.solmat.2018.05.022 ↗
36. Tuning the Se content in Cu2ZnSn(S,Se)4 absorber to achieve 9.7% solar cell efficiency from a thiol/amine-based solution process10.1021/acsaem.7b00146 ↗
37. Nanoscale electrical properties enhancement through antimony incorporation to pave the development of Cu2ZnSn(S,Se)4 solar cells towards low temperature10.1039/C8TA11783G ↗
38. Cu2ZnSnS4 decorated CdS nanorods for enhanced visible-light-driven photocatalytic hydrogen production10.1016/j.ijhydene.2018.09.161 ↗
39. Se-assisted performance enhancement of Cu2ZnSn(S,Se)4 quantum-dot sensitized solar cells via a simple yet versatile synthesis10.1021/acs.inorgchem.9b02154 ↗
40. Forming an ultrathin SnS layer on Cu2ZnSnS4 surface to achieve highly efficient solar cells with Zn(O,S) buffer10.1002/solr.202000010 ↗
41. stable6%-efficient Sb2Se3 solar cells with a ZnO buffer layer10.1038/nenergy.2017.46 ↗
42. AuNCs-catalyzed hydrogen selenide oxidation: mechanism and application for headspace fluorescent detection of Se(IV)10.1021/acs.analchem.9b00738 ↗
43. Self-organized back surface field to improve the performance of Cu2ZnSn(S,Se)4 solar cells by applying p-type MoSe2: Nb to the back electrode interface10.1021/acsami.9b08946 ↗
44. Towards understanding poor performances in spray-deposited Cu2ZnSnS4 thin film solar cells
45. Engineering of interface band bending and defects elimination via Ag-graded active layer for efficient (Cu,Ag)2ZnSn(S,Se)4 solar cells10.1039/C7EE01405H ↗
46. Theoretical models for the action spectrum and the current-voltage characteristics of microporous semiconductor films in photoelectrochemical cells10.1021/j100072a023 ↗
47. Interconnection between trait, structure, and composition of grain boundaries in Cu(In,Ga)Se2 thin-film solar cells10.1002/adfm.202001046 ↗
48. Elemental Se: fundamentals and its optoelectronic applications10.1039/C8TC05873C ↗