journal article·2019-05

Controlling dislocation gliding and propagation in quasi-single crystalline silicon by using <110>-oriented seeds

Fang Zhang, Xuegong Yu, Dongli Hu, Shuai Yuan, Liang He, Runguang Hu, Deren Yang

Publisher page

Abstract

Dislocations originating from the seed junctions are the most harmful defects in quasi-single crystalline silicon (QSC-Si). In traditional <100>-oriented QSC-Si ingots, dislocations easily develop into cascade shape, or even further form sub-grain boundaries as the ingot grows. In this paper, we have developed a novel <110>-oriented QSC-Si ingot to control the gliding and propagation of dislocations. It is found that the cascade shape is absent and dislocations only aggregate in the {100}/{100} boundary planes of <110>-oriented seeds, revealed by the minority carrier lifetime mapping and photoluminescence image. Accordingly, the internal quantum efficiency of <110>-oriented QSC-Si solar cells is obviously higher than that of the traditional <100>-oriented ones. Nevertheless, it should be noticed that the average photoelectric conversion efficiency of <110>-oriented QSC-Si solar cells could be 0.6% lower than that of traditional ones if the {100}/{100} boundary is included in the solar cell, due to a higher reverse leakage current. This problem can be involved by enlarging the size of seed crystals or adopting better seed arrangement. These results provide a new promising method for the development of high quality QSC-Si in photovoltaic industry.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Casting single crystal silicon: novel defect profiles from BP solar's Mono2 TM wafers
2. Nucleation and bulk growth control for high efficiency silicon ingot casting10.1016/j.jcrysgro.2010.10.103 ↗
3. Seed-assisted cast quasi-single crystalline silicon for photovoltaic application: towards high efficiency and low cost silicon solar cells10.1016/j.solmat.2012.02.024 ↗
4. Influence of an insulation partition on a seeded directional solidification process for quasi-single crystalline silicon ingot for high-efficiency solar cells10.1016/j.solmat.2012.01.024 ↗
5. Mono-crystalline growth in directional solidification of silicon with different orientation and splitting of seed crystals10.1016/j.jcrysgro.2012.04.035 ↗
6. Control of grain boundary propagation in mono-like Si: utilization of functional grain boundaries10.7567/APEX.6.025505 ↗
7. Mono-like silicon growth using functional grain boundaries to limit area of multicrystalline grains10.1109/JPHOTOV.2013.2281730 ↗
8. Influence of grain boundaries intentionally induced between seed plates on the defect generation in quasi-mono-crystalline silicon ingots10.1002/crat.201400226 ↗
9. Mono-like silicon ingots grown on low angle misoriented seeds: defect characterization by synchrotron X-ray diffraction imaging10.1016/j.actamat.2015.01.012 ↗
10. D.Y., X. Gu, X. Yu, K. Guo, Z. Yuan, Influence of dislocations on the performance of the cast quasi-single crystalline silicon solar cells, in: Proceedings of the 5th International Workshop on the Crystalline Silicon Solar Cells, Boston, MA, 2011.
11. D. Hu, T. Zhang, L. He, H. Chen, D. Zhong, S. Cao, J. Gao, Y. Wan, The characteristics of sub-grains in the mono-like silicon crystals grown with directional solidification method, in: Proceedings of the 22nd International Photovoltaic Science and Engineering Conference, 2012, pp. 002735–002738.10.1109/PVSC.2012.6318159 ↗
12. Floating cast method to realize high-quality Si bulk multicrystals for solar cells10.1016/j.jcrysgro.2008.10.098 ↗
13. Analysis of intra-grain defects in multicrystalline silicon wafers by photoluminescence mapping and spectroscopy10.1143/JJAP.45.L641 ↗
14. Effect of subgrains on the performance of mono-like crystalline silicon solar cells10.1155/2013/713791 ↗
15. Generation mechanism of dislocations during directional solidification of multicrystalline silicon using artificially designed seed10.1016/j.jcrysgro.2010.01.011 ↗
16. Effect of sub-grains and crystal defects on monolike Si solar cell performance
17. Characterization of defects in mono-like silicon wafers and their effects on solar cell efficiency10.1016/j.solmat.2013.09.020 ↗
18. Seed manipulation for artificially controlled defect technique in new growth method for quasi-monocrystalline Si ingot based on casting10.7567/APEX.8.105501 ↗
19. Higher quality mono-like cast silicon with induced grain boundaries10.1016/j.solmat.2015.03.027 ↗
20. Effect of seed arrangements on the quality of n-type monolike silicon grown by directional solidification10.1021/acs.cgd.6b01317 ↗
21. Dislocation etch for (100) planes in silicon10.1149/1.2404374 ↗
22. Comparison of defect formations in solar silicon growth from small random and large oriented seeds10.1016/j.jcrysgro.2015.02.087 ↗
23. Structure and dislocation development in mono-like silicon10.1002/pssa.201532105 ↗
24. Influence of dislocations on electrical properties of large grained polycrystalline silicon cells. II. Experimental results10.1063/1.344393 ↗