journal article·2019-04

Tailoring solubility of methylammonium lead halide with non-stoichiometry molar ratio in perovskite solar cells: Morphological and electrical relationships for high current generation

Byung Gi Kim, Woongsik Jang, Jae Sang Cho, Dong Hwan Wang

Publisher page

Abstract

Abstract Recent studies have shown a highly efficient performance of perovskite solar cells (PSCs) of 22.7%. Although a number of efforts have been made to reproduce flat, uniform, and dense perovskite films using a stoichiometric ratio of 'CH3NH3I: PbI2: DMSO = 1:1:1′, several complicated processes are required to achieve a regular grain-to-grain uniformity. Therefore, it was difficult to reproduce. This is because the conventional ratio of 'CH3NH3I: PbI2: DMSO = 1:1:1′ can cause the CH3NH3I-PbI2-DMSO intermediate phase and the CH3NH3PbI3 crystal phase to coexist in solution. As a result, the CH3NH3PbI3 crystals in the solution may deteriorate the quality of the thin film. In this study, the non-stoichiometric molar ratio among CH3NH3I:PbI2:DMSO solutions was applied to control the quality of the perovskite layers. We successfully fabricated uniform and dense CH3NH3PbI3 PSCs, by simply manipulating CH3NH3PbI3 solubility with the different DMSO molar amounts. Further, a homogeneous grain size and a regular inter-grain arrangement with scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses were obtained in the optimized solubility. We also confirmed that the PSCs with the optimized condition exhibited higher Jsc (Current density) and PCE (Power Conversion Efficiency), due to the Lamer model effect on the enhancement of the internal light absorption. Furthermore, the device with the optimized solubility exhibited enhanced electrical properties. Especially, the improved-electrical properties of the charge carrier-separation, mobility, collection, generation, and resistances were confirmed by photoluminescence (PL) quenching/mapping of the space-charge limited current (SCLC), the photo current density as a function of internal voltage (Jph–Vint) characteristic, and the impedance. Consequently, it was shown that tailoring the solubility of CH3NH3PbI3 can have a critical effect on the production of high quality perovskite thin films. These films will have an appropriate particle size and uniformity that will have a promising approach for generating high current densities.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Performance improvement of perovskite solar cells through enhanced hole extraction: the role of iodide concentration gradient10.1016/j.solmat.2018.05.025 ↗
2. Performance improvement of perovskite solar cells by employing a CdSe quantum dot/PCBM composite as an electron transport layer10.1039/C7TA00203C ↗
3. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
4. Low-temperature processed meso-superstructured to thin-film perovskite solar cells10.1039/c3ee40810h ↗
5. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
6. Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells10.1038/ncomms8747 ↗
7. Efficiency-chart.png (1382×766), (n.d.). 〈https://www.nrel.gov/pv/assets/images/efficiency-chart.png〉 (accessed 8 March 2018).
8. A universal method to produce low-work function electrodes for organic electronics10.1126/science.1218829 ↗
9. Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers10.1039/C4EE01138D ↗
10. Efficient inorganic–organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors10.1038/nphoton.2013.80 ↗
11. Organic-inorganic hybrid materials as semiconducting channels in thin-film field-effect transistors10.1126/science.286.5441.945 ↗
12. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
13. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
14. Improving the efficiency of perovskite solar cells through optimization of the CH3NH3PbI3 film growth in solution process method10.1016/j.apsusc.2015.10.132 ↗
15. Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques10.1038/nphoton.2013.342 ↗
16. Perovskite solar cells employing organic charge-transport layers10.1038/nphoton.2013.341 ↗
17. Enhanced photovoltaic performance of CH 3 NH 3 PbI 3 perovskite solar cells through interfacial engineering using self-assembling monolayer10.1021/ja512518r ↗
18. Solvent annealing of perovskite-induced crystal growth for photovoltaic-device efficiency enhancement10.1002/adma.201401685 ↗
19. High performance perovskite solar cells by hybrid chemical vapor deposition10.1039/C4TA04385E ↗
20. Planar heterojunction perovskite solar cells via vapor-assisted solution process10.1021/ja411509g ↗
21. Influence of air annealing on high efficiency planar structure perovskite solar cells10.1021/cm5041997 ↗
22. Efficient methylammonium lead iodide perovskite solar cells with active layers from 300 to 900 nm
23. Temperature-dependent hysteresis effects in perovskite-based solar cells10.1039/C4TA04969A ↗
24. Formation of organic–inorganic mixed halide perovskite films by thermal evaporation of PbCl 2 and CH 3 NH 3 I compounds10.1039/C4RA17316C ↗
25. Photovoltaic devices employing vacuum-deposited perovskite layers10.1557/mrs.2015.170 ↗
26. Electroluminescence from an organic−inorganic perovskite incorporating a quaterthiophene dye within lead halide perovskite layers10.1021/cm990561t ↗
27. Thin film deposition of organic−inorganic hybrid materials using a single source thermal ablation technique10.1021/cm9811139 ↗
28. Effect of thermal annealing on the optical and morphological properties of (AETH)PbX4 (X = Br, I) perovskite films prepared using single source thermal ablation
29. Compositional engineering of perovskite materials for high-performance solar cells10.1038/nature14133 ↗
30. A. Ariyarit, Process improvement of thin film photovoltaic devices with studies on the effect of electron transporting layer(本文). 〈https://ci.nii.ac.jp/naid/500001040705/〉 (accessed 8 March 2018), 2017.
31. Influence of void-free perovskite capping layer on the charge recombination process in high performance CH 3 NH 3 PbI 3 perovskite solar cells10.1039/C5NR06362K ↗
32. Effect of precursor solution aging on the crystallinity and photovoltaic performance of perovskite solar cells10.1002/aenm.201602159 ↗
33. The physics of photon induced degradation of perovskite solar cells
34. Colloidal engineering for monolayer CH 3 NH 3 PbI 3 films toward high performance perovskite solar cells10.1039/C7TA08761F ↗
35. Modulated CH3NH3PbI3−xBrx film for efficient perovskite solar cells exceeding 18%10.1038/srep44603 ↗
36. Ternary solvent for CH3NH3PbI3 perovskite films with uniform domain size10.1039/C6CP06709C ↗
37. Solution-processed Cu 2 ZnSnS 4 absorbers prepared by appropriate inclusion and removal of thiourea for thin film solar cells10.1039/C3RA45441J ↗
38. Methodologies toward highly efficient perovskite solar cells10.1002/smll.201704177 ↗
39. Enhanced perovskite electronic properties via a modified lead(II) chloride Lewis acid–base adduct and their effect in high-efficiency perovskite solar cells10.1039/C6TA11139D ↗
40. Recombination in perovskite solar cells: significance of grain boundaries, interface traps, and defect ions10.1021/acsenergylett.7b00236 ↗
41. Control of the morphology of PbI 2 films for efficient perovskite solar cells by strong Lewis base additives10.1039/C7TC01973D ↗
42. Understanding perovskite formation through the intramolecular exchange method in ambient conditions10.1117/1.JPE.7.022002 ↗
43. Anti-solvent crystallization strategies for highly efficient perovskite solar cells10.3390/cryst7100291 ↗
44. Enhanced crystallinity of CH 3 NH 3 PbI 3 by the pre-coordination of PbI 2 –DMSO powders for highly reproducible and efficient planar heterojunction perovskite solar cells10.1039/C7RA12304C ↗
45. Making and breaking of lead halide perovskites10.1021/acs.accounts.5b00455 ↗
46. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange10.1126/science.aaa9272 ↗
47. A molecularly engineered hole-transporting material for efficient perovskite solar cells10.1038/nenergy.2015.17 ↗
48. Crystal Structure Formation of CH3NH3PbI3-xClx Perovskite10.3390/ma9030123 ↗
49. Retrograde solubility of formamidinium and methylammonium lead halide perovskites enabling rapid single crystal growth10.1039/C5CC06916E ↗
50. Crystallization: key thermodynamic, kinetic and hydrodynamic aspects10.1007/s12046-013-0195-4 ↗
51. Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells10.1038/nmat4014 ↗
52. Conversion of single crystalline PbI 2 to CH 3 NH 3 PbI 3: structural relations and transformation dynamics10.1021/acs.chemmater.6b01747 ↗
53. Nanoscale Critical kinetic control of non-stoichiometric intermediate phase transformation for effi cient perovskite solar cells Critical kinetic control of non-stoichiometric intermediate phase transformation for efficient perovskite solar cells10.1039/C6NR00488A ↗
54. Enhanced photovoltaic performance of the inverted planar perovskite solar cells by using mixed-phase crystalline perovskite film with trace amounts of PbI 2 as an absorption layer10.1021/acs.jpcc.7b04338 ↗
55. Modeling nucleation, growth, and ostwald ripening in crystallization processes: a comparison between population balance and kinetic rate equation10.1021/cg4010714 ↗
56. From nanostructural evolution to dynamic interplay of constituents: perspectives for perovskite solar cells10.1002/adma.201704208 ↗
57. Perovskite solar cells: In pursuit of efficiency and stability10.1016/j.matdes.2017.09.037 ↗
58. Retarding crystallization during facile single coating of NaCl-incorporated precursor solution for efficient large-area uniform perovskite solar cells10.1021/acsami.6b08783 ↗
59. Schneller · 2013
60. Progress on Perovskite Materials and Solar Cells with Mixed Cations and Halide Anions10.1021/acsami.7b06001 ↗
61. Structures and Electronic Properties of Different CH3NH3PbI3/TiO2 Interface: a First-Principles Study10.1038/srep20131 ↗
62. Thermodynamic origin of instability in hybrid halide perovskites10.1038/srep37654 ↗
63. Z. Song, Solution Processed High Efficiency Thin Film Solar Cells: from Copper Indium Chalcogenides to Methylammonium Lead Halides. 〈https://etd.ohiolink.edu/pg_10?0::NO:10:P10_ACCESSION_NUM:toledo1470403462〉 (accessed 8 March 2018), 2016.
64. Humidity resistant fabrication of CH3NH3PbI3 perovskite solar cells and modules10.1016/j.nanoen.2017.06.039 ↗
65. Switching Off Hysteresis in Perovskite Solar Cells by Fine-Tuning Energy Levels of Extraction Layers10.1002/aenm.201703376 ↗
66. Hysteresis phenomena in perovskite solar cells: the many and varied effects of ionic accumulation10.1039/C6CP06989D ↗
67. Hysteresis in organic-inorganic hybrid perovskite solar cells10.1016/j.solmat.2016.06.025 ↗
68. Highly stable and efficient inverted organic solar cells based on low-temperature solution-processed PEIE and ZnO bilayers10.1039/C6TA00957C ↗
69. Enhanced Performance of Perovskite Solar Cells with Zinc Chloride Additives10.1021/acsami.7b15310 ↗
70. Standardization of photoelectrode area of dye-sensitized solar cells10.1039/c2ra22047d ↗
71. Photoprecursor approach as an effective means for preparing multilayer organic semiconducting thin films by solution processes10.1038/srep07151 ↗
72. A crystal engineering approach for scalable perovskite solar cells and module fabrication: a full out of glove box procedure10.1039/C7TA08038G ↗
73. Thin single crystal perovskite solar cells to harvest below-bandgap light absorption10.1038/s41467-017-02039-5 ↗
74. Annealing induced re-crystallization in CH3NH3PbI3−xClx for high performance perovskite solar cells10.1038/srep46724 ↗
75. AFM studies on surface morphology, topography and texture of nanostructured zinc aluminum oxide thin films
76. S.A. Speakman, Estimating Crystallite Size Using XRD, (n.d.). 〈http://prism.mit.edu/xray〉 (accessed 8 March 2018).
77. Synthesis and crystal chemistry of the hybrid perovskite (CH3NH3)PbI3 for solid-state sensitised solar cell applications10.1039/c3ta10518k ↗
78. Material nucleation/growth competition tuning towards highly reproducible planar perovskite solar cells with efficiency exceeding 20%10.1039/C7TA00027H ↗
79. 〈https://en.wikipedia.org/wiki/Scherrer_equation〉, (n.d.).
80. Progress on perovskite materials and solar cells with mixed cations and halide anions10.1021/acsami.7b06001 ↗
81. Large-area, high-quality organic–inorganic hybrid perovskite thin films via a controlled vapor–solid reaction10.1039/C6TA03180C ↗
82. Nucleation and growth of TiO2 nanoparticles
83. Morphological engineering via processing additive in thin film bulk-heterojunction photovoltaic cells: a systematic understanding of crystal size and charge transport10.1016/j.cap.2016.07.003 ↗
84. ARTICLE Long-term efficient organic photovoltaics based on quaternary bulk heterojunctions10.1038/ncomms14068 ↗
85. Humidity-induced grain boundaries in MAPbI 3 perovskite films10.1021/acs.jpcc.6b00335 ↗
86. Preparation of CH3NH3PbI3 thin films with tens of micrometer scale at high temperature10.1038/s41598-017-09109-0 ↗
87. A feasible and effective post-treatment method for high-quality CH3NH3PbI3 films and high-efficiency perovskite solar cells10.3390/cryst8010044 ↗
88. Direct calorimetric verification of thermodynamic instability of lead halide hybrid perovskites10.1073/pnas.1607850113 ↗
89. Thermal degradation of CH 3 NH 3 PbI 3 perovskite into NH 3 and CH 3 I gases observed by coupled thermogravimetry–mass spectrometry analysis10.1039/C6EE02016J ↗
90. Dry-stamping-transferred PC 71 BM charge transport layer via an interface-controlled polyurethane acrylate mold film for efficient planar-type perovskite solar cells10.1021/acsami.7b01282 ↗
91. Performance enhancement of mesoporous TiO2-based perovskite solar cells by ZnS ultrathin-interfacial modification layer10.1016/j.jallcom.2017.12.199 ↗
92. Direct measurement of the exciton binding energy and effective masses for charge carriers in organic–inorganic tri-halide perovskites10.1038/nphys3357 ↗
93. Device physics of polymer: fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗
94. High-performance integrated perovskite and organic solar cells with enhanced fill factors and near-infrared harvesting10.1002/adma.201504555 ↗
95. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
96. Enhanced spectral coverage in tandem organic solar cells10.1063/1.2336593 ↗
97. Solar cells. Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals10.1126/science.aaa2725 ↗
98. Space-charge limited photocurrent10.1103/PhysRevLett.94.126602 ↗
99. Photovoltaic performance of perovskite solar cells with different grain sizes10.1002/adma.201504144 ↗
100. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗