journal article·2017-05Open access

Pathway for recovery of photo-degraded polymer solar cells by post degradation thermal anneal

J. Bhattacharya, P.H. Joshi, R. Biswas, V.L. Dalal

Abstract

Abstract The photo-degradation of polymer solar cells is a critical challenge preventing its commercial deployment. We experimentally fabricate organic solar cells and characterize their degradation under solar simulators in an environmental chamber under nitrogen flow, without exposure to oxygen and moisture. We have developed a thermally stable inverted organic solar cell architecture in which light induced degradation of device characteristics can be reversibly annealed to the pristine values. The stable inverted cells utilized MoO x layers that are thermally treated immediately after their deposition on the organic layer, and before metal cathode deposition. Organic solar cells that are photo-degraded in the presence of oxygen, however show irreversible degradation that cannot be thermally recovered. The decrease of organic solar cell characteristics correlates with increases in mid-gap electronic states, measured using capacitance spectroscopy and dark current. It is likely the photo-induced defect states caused by local H motion from the alkyl chains to the aromatic backbone, can be reversibly annealed at elevated temperatures after photo-degradation. Our results provide a pathway for improving the stability of organic photovoltaics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
2. Heliatek (Press Release), 〈www.heliatek.com/en/press/press-releases/details/heliatek-sets-new-organic-photovoltaic-world-record-efficiency-of-13-2〉, accessed (07/03/2016).
3. Analysis of the failure mechanism for a stable organic photovoltaic during 10000h of testing10.1002/pip.794 ↗
4. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
5. Degradation mechanism of organic solar cells with aluminum cathode10.1016/j.solmat.2011.07.020 ↗
6. Pathways for the degradation of organic photovoltaic P3HT:PCBM based devices10.1016/j.solmat.2008.01.020 ↗
7. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
8. Influence of oxygen on semitransparent organic solar cells with gas permeable electrodes10.1016/j.orgel.2009.08.001 ↗
9. Effects of long-term UV–visible light irradiation in the absence of oxygen on P3HT and P3HT:PCBM blend10.1016/j.solmat.2010.03.012 ↗
10. Oxygen doping-induced photogeneration loss in P3HT:PCBM solar cells10.1016/j.solmat.2012.01.012 ↗
11. Air stable polymer photovoltaics based on a process free from vacuum steps and fullerenes10.1016/j.solmat.2008.01.013 ↗
12. Oxygen doping of P3HT:PCBM blends: influence on trap states, charge carrier mobility and solar cell performance10.1016/j.orgel.2010.07.016 ↗
13. Degradation and stability of polymer and organic solar cells10.1016/j.solmat.2008.01.016 ↗
14. Light-induced degradation of the active layer of polymer-based solar cells10.1016/j.polymdegradstab.2009.11.021 ↗
15. Radiation induced recombination centers in organic solar cells10.1103/PhysRevB.85.205211 ↗
16. Recombination through different types of localized states in organic solar cells10.1002/adfm.201200031 ↗
17. Photo-induced changes in fundamental properties of organic solar cells10.1063/1.4711806 ↗
18. Light-induced degradation mechanism in poly(3-hexylthiophene)/fullerene blend solar cells10.1002/aenm.201600171 ↗
19. T. Yamanari, H. Ogo, T. Taima, J. Sakai, J. Tsukamoto, Y. Yoshida, Photo-degradation and its recovery by thermal annealing in polymer-based organic solar cells, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference (PVSC), 2010.10.1109/PVSC.2010.5616522 ↗
20. Out-door testing and long-term stability of plastic solar cells10.1051/epjap:2006159 ↗
21. Reversible degradation of inverted organic solar cells by concentrated sunlight10.1088/0957-4484/22/22/225401 ↗
22. Reversible degradation in ITO-containing organic photovoltaics under concentrated sunlight10.1039/C4CP05571C ↗
23. Enhanced regeneration of degraded polymer solar cells by thermal annealing10.1063/1.4878408 ↗
24. M. Prorok, T. Zdanowicz, M. Dusza, F. Granek, Degradation under illumination and partial recovery of performance parameters of the inverted organic solar cells (OPV) based on P3HT:PCBM, in: Proceedings of the 29th European Photovoltaic Solar Energy Conference and Exhibition, 2014.
25. Correlation between blend morphology and recombination dynamics in additive-added P3HT:PCBM solar cells10.1039/C5CP03762J ↗
26. The crucial role of confined residual additives on the photo stability of P3HT:PCBM active layers10.1021/acs.jpcc.5b01733 ↗
27. Effect of the end group of regio-regular poly(3-hexylthiophene) polymers on the performance of polymer/fullerene solar cells10.1021/jp072306z ↗
28. High-efficiency organic solar cells based on end-functional-group-modified poly(3-hexylthiophene)10.1002/adma.200902803 ↗
29. The influence of polymer purification on the efficiency of poly(3-Hexylthiophene):fullerene organic solar cells10.1038/srep23651 ↗
30. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
31. Identifying a threshold impurity level for organic solar cells: enhanced first-order recombination via well-defined PC84BM traps in organic bulk heterojunction solar cells10.1002/adfm.201100514 ↗
32. Radiation induced hydrogen rearrangement in Poly(3-alkylthiophene)10.7567/APEX.6.121601 ↗
33. Atomic pathways underlying light-induced changes in organic solar cell materials10.1021/acs.jpcc.5b05234 ↗
34. Reversible conductivity changes in discharge‐produced amorphous Si10.1063/1.89674 ↗
35. Silver diffusion in organic optoelectronic devices: deposition-related processes versus secondary ion mass spectrometry analysis artifacts10.1021/acs.jpcc.5b06860 ↗
36. The effect of post-annealing on the interface between the aluminum electrode and the active layer in polymer/fullerene solar cells10.1007/s00339-014-8550-9 ↗
37. MoO3 thickness, thermal annealing and solvent annealing effects on inverted and direct polymer photovoltaic solar cells10.3390/ma5122521 ↗
38. Modifying thermal transport in colloidal nanocrystal solids with surface chemistry10.1021/acsnano.5b05085 ↗
39. Photo induced degradation of polymer and polymer-fullerene active layers: experiment and theory10.1002/adfm.201001079 ↗