A critical look at organic photovoltaic fabrication methodology: Defining performance enhancement parameters relative to active area
Source abstract
Abstract
Abstract With the ever-increasing focus on obtaining higher device power conversion efficiencies (PCEs) for organic photovoltaics (OPV), there is a need to ensure samples are measured accurately. Reproducible results are required to compare data across different research institutions and countries and translate these improvements to real-world production. In order to report accurate results, and additionally find the best-practice methodology for obtaining and reporting these, we show that careful analysis of large data sets can identify the best fabrication methodology. We demonstrate which OPV outputs are most affected by different fabrication or measurement methods, and identify that masking effects can result in artificially-boosted PCEs by increasing fill factor and current densities, requiring care when selecting which mask to use. For example, our best performing devices (>6% efficiency) show that the smallest mask areas have not produced a surfeit of the highest performers, with only 11% of the top performing devices measured using a 0.032 cm 2 mask area, while 44% used the largest mask (0.64 cm 2 ). This trend holds true for efficiencies going down to 5%, showing that effective fabrication conditions are reproducible with increasing mask areas, and can be translated to even larger device areas. Finally, we emphasise the necessity for reporting the best PCE along with the average value in order to implement changes in real-world production.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. The case for organic photovoltaics10.1039/c3ra42989j ↗
2. Transferable graphene oxide by stamping nanotechnology: electron-transport layer for efficient bulk-heterojunction solar cells10.1002/anie.201209999 ↗
3. Y. Galagan, A. Manor, R. Andriessen, E.A. Katz, Analysis of light intensity dependence of organic photovoltaics: towards efficient large-area solar cells, in: Photovoltaic Specialists Conference (PVSC), 2012 38th IEEE, IEEE, 2012, pp. 002750–002752.10.1109/PVSC.2012.6318162 ↗
4. ITO-free flexible polymer solar cells: from small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
5. Hybrid graphene-metal oxide solution processed electron transport layers for large area high-performance organic photovoltaics10.1002/adma.201304780 ↗
6. Analytical model for the design principle of large-area solar cells10.1016/j.solmat.2011.08.016 ↗
7. Reduction of collection efficiency of charge carriers with increasing cell size in polymer bulk heterojunction solar cells10.1002/adfm.201001578 ↗
8. Organic–inorganic solar cells: recent developments and outlook, selected topics in quantum electronics
9. Hybrid carbon nanotube networks as efficient hole extraction layers for organic photovoltaics10.1021/nn304705t ↗
10. Photoluminescence quenching in carbon nanotube-polymer/fullerene films: carbon nanotubes as exciton dissociation centres in organic photovoltaics10.1002/adma.201101549 ↗
11. Inorganics-in-organics: recent developments and outlook for 4G polymer solar cells10.1039/c3nr02733c ↗
12. The state of organic solar cells—a meta analysis10.1016/j.solmat.2013.05.034 ↗
13. Additives for morphology control in high-efficiency organic solar cells10.1016/j.mattod.2013.08.013 ↗
14. Accurate characterization of OPVs: device masking and different solar simulators10.1016/j.solmat.2012.11.020 ↗
15. Accurate measurement a characterization of organic solar cells10.1002/adfm.200600489 ↗
16. How should you measure your excitonic solar cells?10.1039/c2ee03429h ↗
17. The perils of solar cell efficiency measurements10.1038/nphoton.2012.119 ↗
18. Organic solar cells: a new look at traditional models10.1039/c1ee01663f ↗
19. Area dependent efficiency of organic solar cells10.1063/1.2998540 ↗
20. Area-scaling of organic solar cells10.1063/1.3211850 ↗
21. Efficient large area semitransparent organic solar cells based on highly transparent and conductive ZTO/Ag/ZTO multilayer top electrodes10.1016/j.orgel.2011.06.015 ↗
22. The effect of the front contact sheet resistance on solar cell performance10.1016/j.solmat.2009.03.028 ↗
23. Large-area organic solar cells with metal subelectrode on indium tin oxide anode10.1063/1.3419925 ↗
24. Choice of electrode geometry for accurate measurement of organic photovoltaic cell performance10.1063/1.2895058 ↗
25. Characterization of organic solar cells: the importance of device layout10.1002/adfm.200700295 ↗
26. Improved high-efficiency organic solar cells via incorporation of a conjugated polyelectrolyte interlayer10.1021/ja2037673 ↗
27. Efficient, large area ITO-and-PEDOT-free organic solar cell sub-modules10.1002/adma.201104896 ↗
28. Fabrication and characterizations of PCDTBT:PC71BM bulk heterojunction solar cell using air brush coating method10.1007/s10853-012-7010-1 ↗
29. Effects of a bathophenanthroline exciton blocking layer on thermal annealing-free bulk heterojunction solar cells10.1016/j.synthmet.2013.04.007 ↗
30. Energy level alignment in PCDTBT:PC70BM solar cells: solution processed NiOx for improved hole collection and efficiency10.1016/j.orgel.2012.01.022 ↗
31. Air processed organic photovoltaic devices incorporating a MoOx anode buffer layer10.1063/1.4804294 ↗
32. Around robin study of polymer solar cells and small modules across China10.1016/j.solmat.2013.06.029 ↗
33. Photovoltaic characterization of concentrator solar cells by localized irradiation10.1063/1.2266161 ↗
34. Polymer solar cells with novel fullerene-based acceptor10.1016/j.tsf.2003.10.088 ↗
35. Photocurrent spectroscopy for the investigation of charge carrier generation and transport mechanisms in organic p/n-junction solar cells10.1016/S0927-0248(00)00018-0 ↗
36. Size-dependent behavior of polymer solar cells measured under partial illumination10.1016/j.solmat.2011.08.012 ↗
37. A.R. Burgers, J.A. Eikelboom, A. Schonecker, W.C. Sinke, Improved treatment of the strongly varying slope in fitting solar cell IV curves, in: Photovoltaic Specialists Conference, 1996, Conference Record of the Twenty Fifth IEEE, IEEE, 1996, pp. 569–572.10.1109/PVSC.1996.564070 ↗
38. Nanomorphology of PCDTBT:PC70BM bulk heterojunction solar cells10.1002/aenm.201100667 ↗
39. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
40. High throughput testing platform for organic solar cells10.1002/pip.836 ↗
41. Detection and role of trace impurities in high-performance organic solar cells10.1039/c3ee40556g ↗
42. High efficiency inverted polymeric bulk-heterojunction solar cells with hydrophilic conjugated polymers as cathode interlayer on ITO10.1016/j.solmat.2011.09.030 ↗
43. Oxidised carbon nanotubes as solution processable, high work function hole-extraction layers for organic solar cells10.1016/j.orgel.2008.12.013 ↗
44. Nanostructured copper phthalocyanine-sensitized multiwall carbon nanotube films10.1021/la070156d ↗
45. Carbon nanotubes: a multi-functional material for organic optoelectronics10.1039/b713527k ↗
46. Carbon nanotubes grown on In2O3: Sn glass as large area electrodes for organic photovoltaics10.1063/1.2431437 ↗
47. Interpenetrating multiwall carbon nanotube electrodes for organic solar cells10.1063/1.2357844 ↗
48. Water-soluble multiwall-carbon-nanotube-polythiophene composite for bilayer photovoltaics10.1063/1.2356115 ↗