Optimum design of ordered bulk heterojunction organic photovoltaics
Source abstract
Abstract
Abstract Organic photovoltaics (OPVs) have recently received increasing attention as alternatives to inorganic solar cells because of their light weight, compatibility with flexible electronics, and low production cost. In this work, an ideal device structure for ordered bulk heterojunction (OBHJ) organic photovoltaics is proposed. Also suggested is a parameter related to the power conversion efficiency (PCE) of the devices. Such a parameter could serve as a rule of thumb for researchers. For cases in which it is difficult to reduce the pillar size and spacing, the proposed parameter dictates that an increase in the active layer thickness could be one way to increase the PCE of an OBHJ. To generate maximum PCE, (1) the pillar size and spacing must be two to three times less than the exciton diffusion length and (2) the thickness of the active layer has to be greater than half of the photon mean free path, which is the inverse of the absorption coefficient.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
2. A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules10.1016/j.solmat.2009.07.015 ↗
3. Using light-induced thermocleavage in a Roll-to-roll process for polymer solar cells10.1021/am900858x ↗
4. Two-layer organic photovoltaic cell10.1063/1.96937 ↗
5. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
6. High quantum efficiency polythiophene/C-60 photodiodes10.1002/(SICI)1521-4095(199807)10:10<774::AID-ADMA774>3.0.CO;2-J ↗
7. Reappraising the need for bulk heterojunctions in polymer-fullerene photovoltaics: the role of carrier transport in all-solution-processed P3HT/PCBM bilayer solar cells10.1021/jp9050897 ↗
8. Efficient photodiodes from interpenetrating polymer networks10.1038/376498a0 ↗
9. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
10. Network structure organic photovoltaic devices prepared by electrochemical copolymerization10.1016/j.solmat.2008.09.005 ↗
11. Thienyl-substituted methanofullerene derivatives for organic photovoltaic cells10.1039/B916597E ↗
12. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
13. Controlling nanoscale morphology in polymer photovoltaic devices10.1016/j.nantod.2010.05.004 ↗
14. Conjugated polymer photovoltaic cells10.1021/cm049654n ↗
15. Imprinted large-scale high density polymer nanopillars for organic solar cells10.1116/1.2981076 ↗
16. Poly(3-hexylthiophene) nanorods with aligned chain orientation for organic photovoltaics10.1002/adfm.200901760 ↗
17. Nanostructured interfaces in polymer solar cells10.1063/1.3458809 ↗
18. Formation of well-ordered heterojunctions in polymer: PCBM photovoltaic devices10.1002/adfm.201000573 ↗
19. Design of nanostructured heterojunction polymer photovoltaic devices10.1021/nl034810v ↗
20. Modeling bilayer polymer/fullerene photovoltaic devices10.1063/1.1759786 ↗
21. Morphological device model for organic bulk heterojunction solar cells10.1021/nl901511a ↗
22. Modeling the short-circuit current density of polymer solar cells based on P3HT:PCBM blend10.1016/j.solmat.2006.10.019 ↗
23. Optimization of thickness and morphology of active layer for high performance of bulk-heterojunction organic solar cells10.1016/j.solmat.2010.02.041 ↗
24. Modeling photocurrent action spectra of photovoltaic devices based on organic thin films10.1063/1.370757 ↗
25. Dynamical Monte Carlo modelling of organic solar cells: the dependence of internal quantum efficiency on morphology10.1021/nl051098o ↗
26. Dynamic Monte Carlo simulation for highly efficient polymer blend photovoltaics10.1021/jp907167u ↗
27. Influence of P3HT:PCBM blend preparation on the active layer morphology and cell degradation10.1016/j.microrel.2010.09.016 ↗
28. Device annealing effect in organic solar cells with blends of regioregular poly(3-hexylthiophene) and soluble fullerene
29. Origin of the open circuit voltage of plastic solar cells10.1002/1616-3028(200110)11:5<374::AID-ADFM374>3.0.CO;2-W ↗
30. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
31. Efficiency enhancement in organic solar cells with ferroelectric polymers10.1038/nmat2951 ↗
32. Optical constants of conjugated polymer/fullerene based bulk-heterojunction organic solar cells10.1080/713738799 ↗
33. Stable solutions of doped thiophene oligomers10.1016/0379-6779(93)90483-D ↗
34. Dopant-induced crossover from 1 to 3D charge transport in conjugated polymers10.1103/PhysRevLett.83.3904 ↗
35. Charge transport in doped organic semiconductors10.1103/PhysRevB.68.081204 ↗
36. K. Petritsch, Organic Solar Cell Architectures, Thesis, 2000.
37. Offset energies at organic semiconductor heterojunctions and their influence on the open-circuit voltage of thin-film solar cells10.1103/PhysRevB.75.115327 ↗
38. The limits to organic photovoltaic cell efficiency10.1557/mrs2005.5 ↗
39. Sub-10nm imprint lithography and applications10.1116/1.589752 ↗
40. Formation of nanopatterned polymer blends in photovoltaic devices10.1021/nl904098m ↗