Understanding the performance and loss-mechanisms in donor–acceptor polymer based solar cells: Photocurrent generation, charge separation and carrier transport
Source abstract
Abstract
Advances in bandgap and molecular spectral engineering have led to color-tunable donor–acceptor (DA) polymers for use in esthetically colored bulk-heterojunction (BHJ) photovoltaic devices where control and optimization of the physical processes governing their operation is necessary to realize high efficiency. We detail a study of the processes of photogeneration of charge carriers, their separation at the DA heterojunctions and their transport in solar cells fabricated from a series of dioxythiophene–benzothiadiazole (DOT–BTD) copolymers (PG1–PG3) as the electron donor and methanofullerene (PCBM) derivatives as the electron acceptor. We also examine the effect of the blend composition on carrier transport and photoresponse. The photogeneration of carriers and their dissociation increases with increase in concentration of the acceptor and peaks at ∼88% of PCBM. Measurements on single-carrier devices show that hole mobility in the polymer phase of the blends is enhanced by up to two orders at compositions having >80% of PCBM by weight. However, even at the optimized composition, the electron mobility in the blend is two orders of magnitude higher than the hole mobility. This largely imbalanced carrier transport results in the build-up of space-charges, limiting the efficiency of charge separation at short-circuit (∼53%) and the fill factor (<45%). To highlight the importance of attaining charge balance in BHJ DA blends for photovoltaics, we further investigate and compare solar cells from two model polymers, a low bandgap DA polymer (PSBTBT) and poly-3-hexylthiophene (P3HT), blended with PCBM. Our findings indicate that, in contrast to the DOT–BTD copolymers, carrier transport is significantly more balanced in these model systems, preventing space-charge build-up and reducing recombination, which results in a markedly improved charge separation efficiency and fill factor.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
2. A model to determine financial indicators for organic solar cells10.1016/j.solener.2009.07.009 ↗
3. Manufacture, integration and demonstration of polymer solar cells in a lamp for the “Lighting Africa” initiative10.1039/b918441d ↗
4. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
5. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
6. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
7. High photovoltaic performance of a low-bandgap polymer10.1002/adma.200600160 ↗
8. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
9. Synthesis, characterization, and photovoltaic properties of a low band gap polymer based on silole-containing polythiophenes and 2,1,3-benzothiadiazole10.1021/ja806687u ↗
10. Highly efficient solar cell polymers developed via fine-tuning of structural and electronic properties10.1021/ja901545q ↗
11. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
12. The donor–acceptor approach allows a black-to-transmissive switching polymeric electrochrome10.1038/nmat2272 ↗
13. Efficient green solar cells via a chemically polymerizable donor–acceptor heterocyclic pentamer10.1021/am900116p ↗
14. Green dioxythiophene-benzothiadiazole donor–acceptor copolymers for photovoltaic device applications10.1021/cm903495b ↗
15. Combined effects of MoO3 interlayer and PC70BM on polymer photovoltaic device performance10.1016/j.orgel.2010.02.006 ↗
16. Photoinduced electron transfer from a conducting polymer to buckminsterfullerene10.1126/science.258.5087.1474 ↗
17. Compositional dependence of the performance of poly(p-phenylene vinylene):methanofullerene bulk-heterojunction solar cells10.1002/adfm.200400345 ↗
18. Device physics of polymer:fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗
19. Organic bulk heterojunction solar cells using poly(2,5-bis(3-tetradecyllthiophen-2-yl)thieno[3,2,-b]thiophene)10.1063/1.2899996 ↗
20. Low-bandgap alternating fluorene copolymer/methanofullerene heterojunctions in efficient near-infrared polymer solar cells10.1002/adma.200600124 ↗
21. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
22. Influence of the bridging atom on the performance of a low-bandgap bulk heterojunction solar cell10.1002/adma.200900529 ↗
23. R.D. McCullough, R.S. Loewe, Method of forming poly-(3-substituted) thiophenes, US Patent 6,166,172
24. S.P. Williams, D.W. Laird, T.D. Hammond, A.W. Hannah, E.E. Sheina, S. Jia, Heteroatomic regioregular poly(3-substitutedthiophenes) for photovoltaic cells, US Patent application 20060076050
25. R.D. McCullough, Improving materials, structure, and morphology in organic photovoltaic devices. Materials Research Society fall meeting, 2009. S7.1.
26. Hole transport in poly(phenylene vinylene)/methanofullerene bulk-heterojunction solar cells10.1002/adfm.200305156 ↗
27. Charge transport and photocurrent generation in poly(3-hexylthiophene): methanofullerene bulk-heterojunction solar cells10.1002/adfm.200500420 ↗
28. Recombination-limited photocurrents in low bandgap polymer/fullerene solar cells10.1002/adfm.200801514 ↗
29. Efficient polyfluorene based solar cells10.1016/S0379-6779(02)01182-7 ↗
30. Relating substitution to single-chain conformation and aggregation in poly(p-phenylene vinylene) films10.1021/nl034317j ↗
31. Bimolecular crystals of fullerenes in conjugated polymers and the implications of molecular mixing for solar cells10.1002/adfm.200801684 ↗
32. Relating the morphology of poly(p-phenylene vinylene)/methanofullerene blends to solar-cell performance10.1002/adfm.200305049 ↗
33. Double extraction of uniformly generated electron-hole pairs from insulators with noninjecting contacts10.1063/1.1660633 ↗
34. Space-charge limited photocurrent10.1103/PhysRevLett.94.126602 ↗
35. Photocurrent generation in polymer-fullerene bulk heterojunctions10.1103/PhysRevLett.93.216601 ↗
36. Device model for the operation of polymer/fullerene bulk heterojunction solar cells10.1103/PhysRevB.72.085205 ↗
37. Numerical analysis of transient photoconductivity in insulators10.1063/1.330111 ↗
38. On the pseudo-symmetric current–voltage response of bulk heterojunction solar cells10.1039/b718563d ↗
39. Photocurrent in bulk heterojunction solar cells10.1103/PhysRevB.81.085203 ↗
40. Interface state recombination in organic solar cells10.1103/PhysRevB.81.205307 ↗