Improvement in power conversion efficiency and long-term lifetime of organic photovoltaic cells by using bathophenanthroline/molybdenum oxide as compound cathode buffer layer
Source abstract
Abstract
We demonstrate response and lifetime improvements for organic photovoltaic (OPV) by using organic bathophenanthroline (Bphen) and inorganic molybdenum oxide (MoO3) as a compound cathode buffer layer (CBL). Not only power conversion efficiency (PCE) increases by 27% but also working and storage lifetimes extend at least 10 and 60 times respectively comparing with PV cell with 5 nm thick Bphen as CBL. The optimized PV structure is ITO/CuPc (20 nm)/C60 (40 nm)/Bphen (2 nm)/MoO3 (5 nm)/Al and the CBL of the reference device is 5 nm Bphen without MoO3 layer. The achievement of PV performance and lifetime improvement by introducing such a compound CBL is attributed to appropriate level alignment between C 60, Bphen and MoO3, and stable inorganic MoO3 can prevent from superior oxygen and moisture diffusion into the C60 acceptor layer. The detailed working mechanism of the compound Bphen/MoO 3 CBL in the OPV cells is also argued. 2013 Elsevier B.V.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Two-layer organic photovoltaic cell10.1063/1.96937 ↗
2. Highly efficient GaAs solar cells by limiting light emission angle10.1038/lsa.2013.1 ↗
3. Surface plasmon resonance of layer-by-layer gold nanoparticles induced photoelectric current in environmentally-friendly plasmon-sensitized solar cell10.1038/lsa.2012.14 ↗
4. Operation stability enhancement in organic photovoltaic device by a metal doped organic exciton blocking layer10.1063/1.3497007 ↗
5. Stability enhancement in organic photovoltaic device by using polymerized fluorocarbon anode buffer layer10.1063/1.3610553 ↗
6. Role of buffer in organic solar cells using C60 as an acceptor10.1063/1.2695733 ↗
7. On the function of a bathocuproine buffer layer in organic photovoltaic cells10.1063/1.2362624 ↗
8. Efficient photon harvesting at high optical intensities in ultrathin organic double–hetero-structure photovoltaic diodes10.1063/1.126433 ↗
9. Efficient organic photovoltaic devices using a combination of exciton blocking layer and anodic buffer layer10.1063/1.2363649 ↗
10. Lifetimes of organic photovoltaics: combining chemical and physical characterisation techniques to study degradation mechanisms10.1016/j.solmat.2006.04.009 ↗
11. Analysis of the failure mechanism for a stable organic photovoltaic during 10,000h of testing10.1002/pip.794 ↗
12. Metal oxides as a hole-injecting layer for an organic electroluminescent device10.1088/0022-3727/29/11/004 ↗
13. The origin of the hole injection improvements at indium tin oxide/molybdenum trioxide/N,N′-bis(1-naphthyl)-N,N′-diphenyl-1,1′-biphenyl- 4,4′-diamine interfaces10.1063/1.2965120 ↗
14. The effect of molybdenum oxide interlayer on organic photovoltaic cells10.1063/1.3220064 ↗
15. The effect of a MoOx hole-extracting layer on the performance of organic photovoltaic cells based on small molecule planar heterojunctions10.1016/j.orgel.2010.09.014 ↗
16. Role of the deep-lying electronic states of MoO3 in the enhancement of hole-injection in organic thin films10.1063/1.3231928 ↗
17. Co-evaporated bulk heterojunction solar cells with >6.0% efficiency10.1002/adma.201200234 ↗
18. Enhanced hole injection and transport in molybdenum-dioxide-doped organic hole-transporting layers10.1063/1.2836972 ↗
19. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
20. Open circuit voltage enhancement due to reduced dark current in small molecule photovoltaic cells10.1063/1.3072807 ↗
21. Bulk heterojunction photovoltaic cells with low donor concentration10.1002/adma.201102173 ↗
22. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
23. Organic Schottky barrier photovoltaic cells based on MoOx/C6010.1063/1.3415497 ↗
24. Efficient organic photovoltaic devices using a combination of exciton blocking layer and anodic buffer layer10.1063/1.2363649 ↗
25. Small molecular weight organic thin-film photodetectors and solar cells10.1063/1.1534621 ↗
26. Enhanced open-circuit voltage in subphthalocyanine/C60 organic photovoltaic cells10.1021/ja061655o ↗
27. All-organic tunnel junctions as connecting units in tandem organic solar cell10.1063/1.3033485 ↗
28. Role of transition metal oxides in the charge recombination layer used in tandem organic photovoltaic cells10.1039/c2jm30272a ↗
29. Ambient effects on fullerene/copper phthalocyanine photovoltaic interface10.1063/1.3118580 ↗
30. Effects of oxygen and illumination on the in situ conductivity of C60 thin films10.1103/PhysRevB.47.10873 ↗
31. Effect of water and oxygen on the electronic structure of the organic photovoltaic
32. Device lifetime improvement of polymer-based bulk heterojunction solar cells by incorporating copper oxide layer at Al cathode10.1063/1.3580629 ↗
33. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗