journal article·2014-01

Effect of replacing proton with alkoxy side chain for donor acceptor type organic photovoltaics

Kwan Wook Song, Min Hee Choi, Ho Jun Song, Soo Won Heo, Jang Yong Lee, Doo Kyung Moon

Publisher page

Abstract

Abstract Poly(quarterthiophene-alt-benzothiadiazole), PQT12oBT and PQT12BT, were synthesized through the Stille coupling reaction. The UV–visible absorption spectrum of PQT12oBT showed peaks at 535 nm; moreover, it exhibited a higher molar absorption coefficient ( e =44,000 M −1 cm −1 at 535 nm) than PQT12BT (3300 M −1 cm −1 ) in chloroform solution. The optical band gap of PQT12oBT was calculated 1.74 eV in solid state. The HOMO and LUMO energy levels of PQT12oBT were −5.18 and −3.44 eV, respectively. From the results of X-ray diffraction measurements, the lamellar d-spacing of PQT12oBT in out-of-plane direction was determined to be 21.6 A, and the π – π stacking distance between layers was found to be 4.09 A, with a slight edge-on orientation. Bulk heterojunction-type polymer solar cells were fabricated. With a 1:1 ratio of PQT12oBT and PC 71 BM, the values of open circuit voltage ( V oc ), short circuit current density ( J sc ), fill factor (FF), and power conversion efficiency (PCE) were found to be 0.77 V, 8.9 mA cm −1 , 62.4%, and 4.2%, respectively. In addition, PCE was increased up to 4.4% by the addition of 1-bromonaphthalene (1-BrNT) to the active layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Electroluminescence in conjugated polymers10.1038/16393 ↗
2. Flexible light-emitting diodes made from soluble conducting polymers10.1038/357477a0 ↗
3. Polybenzobisazoles are efficient electron transport materials for improving the performance and stability of polymer light-emitting diodes10.1021/cm020600s ↗
4. Polycondensation of dibromofluorene analogues with tetrafluorobenzene via direct arylation10.1021/ma1028517 ↗
5. Synthesis and electroluminescence properties of fluorene–anthracene based copolymers for blue and white emitting diodes10.1016/j.jiec.2011.02.038 ↗
6. Low band-gap polymers based on quinoxaline derivatives and fused thiophene as donor materials for high efficiency bulk-heterojunction photovoltaic cells10.1039/b823536h ↗
7. Efficient donor–acceptor type polymer semiconductors with well-balanced energy levels and enhanced open circuit voltage properties for use in organic photovoltaics10.1039/c1jm12145f ↗
8. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
9. Natural resource limitations to terawatt-scale solar cells10.1016/j.solmat.2011.06.013 ↗
10. Direct arylation polycondensation for the synthesis of bithiophene-based alternating copolymers10.1039/C2PY20917A ↗
11. Syntheses of new alternating CT-type copolymers of thiophene and pyrido[3,4-b]pyrazine units: their optical and electrochemical properties in comparison with similar CT copolymers of thiophene with pyridine and quinoxaline10.1021/ma981013o ↗
12. Liquid-crystalline semiconducting polymers with high charge-carrier mobility10.1038/nmat1612 ↗
13. Alignment and field-effect transistor behavior of an alternative π-conjugated copolymer of thiophene and 4-alkylthiazole10.1021/cm049825o ↗
14. New coplanar (ABA)n-type donor−acceptor π-conjugated copolymers constituted of alkylthiophene (Unit A) and pyridazine (Unit B): synthesis using hexamethylditin, self-organized solid structure, and optical and electrochemical properties of the copolymers10.1021/cm051561y ↗
15. Conjugated polymer consisting of quinacridone and benzothiadiazole as donor materials for organic photovoltaics: coplanar property of polymer backbone10.1021/ma301466m ↗
16. Integrated optoelectronic devices based on conjugated polymers10.1126/science.280.5370.1741 ↗
17. Thienyl analog of 1-(3-methoxycarbonyl)propyl-1-phenyl-[6,6]-methanofullerene for bulk heterojunction photovoltaic devices in combination with polythiophenes10.1063/1.2397003 ↗
18. Thiophene polymer semiconductors for organic thin-film transistors10.1002/chem.200701717 ↗
19. Controlled orientation of liquid-crystalline polythiophene semiconductors for high-performance organic thin-film transistors10.1063/1.1894597 ↗
20. Synthesis, characterization, and properties of regioregular conjugated polymers containing quaterthiophene and an acceptor repeating units10.1002/pola.23313 ↗
21. High-performance semiconducting polythiophenes for organic thin-film transistors10.1021/ja039772w ↗
22. Efficient bulk heterojunction solar cells from regio-regular- poly(3,3′′′-didodecyl quaterthiophene)/PC70BM blends10.1016/j.orgel.2008.04.005 ↗
23. Blend composition study of poly(3,3′-didodecylquaterthiophene)/[6,6]-phenyl C61 butyric acid methyl ester solution processed organic solar cells10.1063/1.3056386 ↗
24. Effect of polymer nanoparticle formation on the efficiency of polythiophene based “bulk-heterojunction” solar cells10.1021/jp8043016 ↗
25. Effects of selenophene substitution on the mobility and photovoltaic efficiency of polyquaterthiophene-based organic solar cells10.1016/j.orgel.2010.02.008 ↗
26. A side chain-modified quaterthiophene derivative for enhancing the performance of organic solar cell devices10.1039/c2jm32354k ↗
27. π-Conjugated polymers for organic electronics and photovoltaic cell applications10.1021/cm102419z ↗
28. Poly(oligothiophene-alt-benzothiadiazole)s: tuning the structures of oligothiophene units toward high-mobility “black” conjugated polymers10.1021/ma900906t ↗
29. Donor−acceptor polymers incorporating alkylated dithienylbenzothiadiazole for bulk heterojunction solar cells: pronounced effect of positioning alkyl chains10.1021/ma902241b ↗
30. Enhanced photovoltaic performance of low-bandgap polymers with deep LUMO levels10.1002/anie.201003357 ↗
31. Effects of π-conjugated bridges on photovoltaic properties of donor-π-acceptor conjugated copolymers10.1021/ma202656b ↗
32. Tuning the electronic coupling in a low-bandgap donor–acceptor copolymer via the placement of side-chains10.1063/1.3562936 ↗
33. Tailoring side chains of low band gap polymers for high efficiency polymer solar cells10.1016/j.polymer.2010.05.015 ↗
34. 9-Alkylidene-9H-fluorene-containing polymer for high-efficiency polymer solar cells10.1021/ma201477b ↗
35. Synthesis and characterization of low bandgap conjugated donor-acceptor polymers for polymer:PCBM solar cells10.1039/c0jm01641a ↗
36. Stabilized polymers with novel indenoindene backbone against photodegradation for leds and solar cells10.1021/ma801420e ↗
37. Scalable synthesis of fused thiophene-diketopyrrolopyrrole semiconducting polymers processed from nonchlorinated solvents into high performance thin film transistors10.1021/cm303953e ↗
38. Synthesis of novel triphenylene-based discotic liquid crystals with naphthalene moiety in the side chains for photo-polymerisation10.1016/j.jiec.2011.02.042 ↗
39. Thiophene–benzothiadiazole–thiophene (D–A–D) based polymers: effect of donor/acceptor moieties adjacent to D–A–D segment on photophysical and photovoltaic properties10.1039/c1jm10649j ↗
40. Synthesis and characterization of a fluorene–quinoxaline copolymer for light-emitting applications10.1166/jnn.2010.1542 ↗
41. Carbazole and thienyl benzo[1,2,5]thiadiazole based polymers with improved open circuit voltages and processability for application in solar cells10.1039/c1jm12089a ↗
42. Random copolymers based on 3-hexylthiophene and benzothiadiazole with induced π-conjugation length and enhanced open-circuit voltage property for organic photovoltaics10.1002/pola.24280 ↗
43. Synthesis, characterization, and transistor and solar cell applications of a naphthobisthiadiazole-based semiconducting polymer10.1021/ja210687r ↗
44. Direct observation of alkyl chain interdigitation in conjugated polyquarterthiophene self-organized on graphite surfaces10.1002/marc.200800012 ↗
45. Structurally ordered polythiophene nanoparticles for high-performance organic thin-film transistors10.1002/adma.200401660 ↗
46. Using bis(pinacolato)diboron to improve the quality of regioregular conjugated co-polymers10.1039/C0JM02359K ↗
47. New selenophene-based semiconducting copolymers for high performance organic thin-film transistors10.1039/b823082j ↗
48. Deep-red electroluminescent polymers: synthesis and characterization of new low-band-gap conjugated copolymers for light-emitting diodes and photovoltaic devices10.1021/ma047969i ↗
49. Synthesis and photovoltaic characterization of D/A structure compound based on N-substituted phenothiazine and benzothiadiazole10.1016/j.jiec.2012.08.033 ↗
50. Synthesis and characterization of new thieno[3,4-c]pyrrole-4,6-dione derivatives for photovoltaic applications10.1002/adfm.201001771 ↗