Simplified technique for calculating mismatch loss in mass production
Source abstract
Abstract
Abstract This paper describes a generalised approach to estimating mismatch loss for series connected cells, utilising the result that the deviation from maximum power as a function of deviation from maximum power–point–current is a relatively stable relationship for a wide range of cell performances. This Power–Current relationship can be used to verify the strong link between mismatch loss and the variance in the maximum power–point–current values for the cells being mixed together. The mismatch loss in a modern photovoltaic module is low – below 0.1% even when there is no cell sorting whatsoever. Cell-to-module variance effects need to be understood and controlled to ensure mismatch loss remains low in a finished module. Without the constraints of mismatch loss in module design, other motivations for cell sorting should be considered, such as for optimising the manufacturing system or meeting particular product requirements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photovoltaic System Optimization Techniques · Silicon and Solar Cell Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Power loss in photovoltaic arrays due to mismatch in cell characteristics10.1016/0038-092X(79)90121-X ↗
2. T.J. Lambarski, D.L. Kadlec, C.B. Rogers, Effects of cell sorting and module matching on array output, in: Conference Record of the IEEE Photovoltaic Specialists Conference, 1981, pp. 841–844.
3. R. Janoch, Analysis of solar cell mismatch losses at standard and non-standard conditions, in: Conference Record of the IEEE Photovoltaic Specialists Conference, 1984, pp. 558–562.
4. A.W.Y. Ho, S.R. Wenham, Intelligent strategies for minimising mismatch losses in photovoltaic modules and systems, in: 17th European Photovoltaic Solar Energy Conference, 2001, p. 406.
5. Computer simulation of the effects of electrical mismatches in photovoltaic cell interconnection circuits10.1016/0379-6787(88)90059-2 ↗
6. An investigation of mismatch losses in solar photovoltaic cell networks10.1016/j.energy.2006.06.017 ↗
7. Mismatch losses in series combinations of silicon solar cell modules10.1016/0379-6787(88)90018-X ↗
8. A.M. Gabor, H. Field, Optimization of binning schemes during Si-wafer based cell and module testing, in: 19th European Photovoltaic Solar Energy Conference, 2004, p. 2403.
9. H. Field, A.M. Gabor, Cell binning method analysis to minimize mismatch losses and performance variation in Si-based modules, in: Conference Record of the IEEE Photovoltaic Specialists Conference, 2002, pp. 418–421.10.1109/PVSC.2002.1190548 ↗
10. U.A. Yusufoglu, B. Min, T.M. Pletzer, J. van Moelken, H. Kurz, Simulation of solar modules with an extended approach to cell sorting considering optical and electrical parameters, in: 27th European Photovoltaic Solar Energy Conference and Exhibition, 2012, p. 3177.10.1016/j.egypro.2012.07.130 ↗
11. Simulation and analysis of PV module performance by innovative sorting methods10.1016/j.egypro.2012.07.130 ↗
12. Experimental study of mismatch and shading effects in the I–V characteristic of a photovoltaic module10.1016/j.solmat.2005.04.022 ↗
13. Effects of mismatch losses in photovoltaic arrays10.1016/0038-092X(94)00120-3 ↗
14. A study on the mismatch effect due to the use of different photovoltaic modules classes in large-scale solar parks10.1002/pip.2266 ↗
15. Analysis and control of mismatch power loss in photovoltaic arrays10.1002/pip.4670030204 ↗
16. I. Chung, H. Y. Son, H. Oh, U.I. Baek, N. Yoon, W.J. Lee, E.C. Cho, I.S. Moon, Light capturing film on interconnect ribbon for current gain of crystalline silicon PV modules, in: Conference Record of the IEEE Photovoltaic Specialists Conference, 2013, pp. 1478–1480.10.1109/PVSC.2013.6744424 ↗
17. Research on decrease of cell to module loss for crystalline silicon photovoltaic module10.1063/1.4821512 ↗
18. The influence of mismatch of solar cells on relative power loss of photovoltaic modules10.1016/j.solener.2013.08.004 ↗
19. A mathematical model for cell-to-module conversion considering mismatching solar cells and the resistance of the interconnection ribbon10.1016/j.solener.2014.01.032 ↗
20. K. Wilson, D.D. Ceuster, R.A. Sinton, Measuring the effect of cell mismatch on module output, in: Conference Record of the 2006 IEEE 4th World Conference on Photovoltaic Energy Conversion, WCPEC-4, vol. 1, 2007, pp. 916–919.10.1109/WCPEC.2006.279605 ↗
21. Wenham · 1994
22. K.R. McIntosch, Lumps, Humps and Bumps: Three Detrimental Effects in the Current–Voltage Curve of Silicon Solar Cells (Ph.D. thesis), UNSW, 2001.
23. www.pvlighthouse.com.au.
24. B. Li, J.A. Segui, C.J. Fountain, C.E. Dube, B. Tsefrekas, Effect of encapsulant on cell-to-module efficiency loss in PV modules with ion implant and POCL3 cells, in: Conference Record of the IEEE Photovoltaic Specialists Conference, 2012, pp. 2336–2341.10.1109/PVSC.2012.6318067 ↗
25. Performance of low series-resistance interconnections on the polycrystalline solar cells10.1016/j.solmat.2010.04.034 ↗
26. P. Sanchez-Illescas, P. Carpena, P. Bernaola-Galván, M.P. Rocha, J.C. Rubio, M.S. de Cardona, P. Sánchez-Friera, B. Lalaguna, Performance of photovoltaic modules with white reflective back sheets, in: Proceedings of the 23rd EUPVSEC, Valencia, Spain, 2008, pp. 346–349.
27. H. Wirth, Crystalline Silicon PV Module Technology, Semiconductors and Semimetals, vol. 89, 2013.10.1016/B978-0-12-381343-5.00003-3 ↗
28. Isotextured silicon solar cell analysis and modeling 110.1109/JPHOTOV.2012.2206569 ↗
29. Reduced fill factors in multicrystalline silicon solar cells due to injection-level dependent bulk recombination lifetimes10.1002/1099-159X(200007/08)8:4<363::AID-PIP328>3.0.CO;2-Y ↗
30. Method for module rsh determination and its comparison with standard methods10.1016/j.solener.2014.08.031 ↗