HI-assisted fabrication of Sn-doping TiO2 electron transfer layer for air-processed perovskite solar cells with high efficiency and stability
Source abstract
Abstract
Abstract Effective electron transport layers (ETLs) provide enhanced charge separation and transport, therefore as a vital part in improving the efficiency of planar perovskite solar cells (PSCs). Herein, we report a new synergistic strategy using HI to passivate TiO2 film and surface while incorporating tin element into TiO2 ETL. HI is first used to control the hydrolysis of TiO2 precursors and eliminate oxygen vacancies related trap states. Then, tin element is incorporated into HI-passivated TiO2 precursor solution to construct composite TiO2/SnO2 film, affording increased electron mobility and suitable energy level. Moreover, the entire preparation process is performed under uncontrolled environmental conditions at 150 °C temperatures. Benefiting from the improved quality of the ETLs, the unencapsulated PSCs achieve optimized power conversion efficiency (PCE) of 17.77% with greatly improved stability. After storage in ambient for 1450 h, the device still maintains 92% of its initial efficiency, while hold 79% PCE after 7 h of 1 sun exposure and 86% PCE after heating at 100 °C for 21 h.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. The National Renewable Energy Laboratory (Nrel)
3. Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations10.1038/nenergy.2017.102 ↗
4. Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells10.1039/c3ee43822h ↗
5. A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells10.1126/science.aad5845 ↗
6. Correlation of energy disorder and open-circuit voltage in hybrid perovskite solar cells10.1038/nenergy.2015.1 ↗
7. Perovskite solar cells: stability lies at interfaces10.1038/nenergy.2017.115 ↗
8. Morphological control for high performance, solution‐processed planar heterojunction perovskite solar cells10.1002/adfm.201302090 ↗
9. Ultraviolet-ozone modification on TiO2 surface to promote both efficiency and stability of low-temperature planar perovskite solar cells10.1016/j.cej.2020.124731 ↗
10. Enhanced short-circuit current density of perovskite solar cells using Zn-doped TiO2 as electron transport layer10.1016/j.solmat.2016.07.003 ↗
11. Metal oxide charge transport layers for efficient and stable perovskite solar cells10.1002/adfm.201900455 ↗
12. Synthesis of few-layer MoS2 nanosheets-coated TiO2 nanosheets on graphite fibers for enhanced photocatalytic properties10.1016/j.solmat.2017.07.027 ↗
13. Review on the application of SnO2 in perovskite solar cells10.1002/adfm.201802757 ↗
14. Enhanced electrical property of compact TiO2 layer via platinum doping for high‐performance perovskite solar cells10.1002/solr.201800149 ↗
15. Boosting the efficiency of perovskite solar cells with CsBr‐modified mesoporous TiO2 beads as electron‐selective contact10.1002/adfm.201705763 ↗
16. Efficient and stable solution-processed planar perovskite solar cells via contact passivation10.1126/science.aai9081 ↗
17. Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide10.1039/C6EE02390H ↗
18. SnO2: a wonderful electron transport layer for perovskite solar cells10.1002/smll.201801154 ↗
19. Enhanced efficiency and ambient stability of planar heterojunction perovskite solar cells by using organic-inorganic double layer electron transporting material10.1016/j.electacta.2018.10.138 ↗
20. Enhancing efficiency of planar structure perovskite solar cells using Sn-doped TiO2 as electron transport layer at low temperature10.1016/j.electacta.2017.12.108 ↗
21. Gradient Sn-doped heteroepitaxial film of faceted rutile TiO2 as an electron selective layer for efficient perovskite solar cells10.1021/acsami.9b04308 ↗
22. Green low-temperature-solution-processed in situ HI modified TiO2/SnO2 bilayer for efficient and stable planar perovskite solar cells build at ambient air conditions10.1016/j.electacta.2019.134924 ↗
23. An Er-doped TiO2 phase junction as an electron transport layer for efficient perovskite solar cells fabricated in air10.1039/C8TA04444A ↗
24. Low‐temperature fabrication of highly crystalline SnO2 nanorods10.1002/adma.200304899 ↗
25. Ultrasonic‐assisted wet chemistry synthesis of ultrafine SnO2 nanoparticles for the electron‐transport layer in perovskite solar cells10.1002/cssc.201801306 ↗
26. Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cells10.1038/nenergy.2016.177 ↗
27. A band‐edge potential gradient heterostructure to enhance electron extraction efficiency of the electron transport layer in high‐performance perovskite solar cells10.1002/adfm.201700878 ↗
28. Electronic structure and optical properties of amorphous Ge and Si10.1103/PhysRevB.8.2827 ↗
29. TiO2/SnO2 nanocomposites as electron transporting layer for efficiency enhancement in planar CH3NH3PbI3-based perovskite solar cells10.1021/acsaem.8b01331 ↗
30. Surface engineering of TiO2 ETL for highly efficient and hysteresis‐less planar perovskite solar cell (21.4%) with enhanced open‐circuit voltage and stability10.1002/aenm.201800794 ↗
31. Roles of fullerene‐based interlayers in enhancing the performance of organometal perovskite thin‐film solar cells10.1002/aenm.201402321 ↗
32. Enhanced efficiency and stability of inverted perovskite solar cells using highly crystalline SnO2 nanocrystals as the robust electron‐transporting layer10.1002/adma.201600619 ↗
33. Defect states in perovskite solar cells associated with hysteresis and performance10.1063/1.4963760 ↗
34. Evidence for ion migration in hybrid perovskite solar cells with minimal hysteresis10.1038/ncomms13831 ↗
35. Iodine migration and its effect on hysteresis in perovskite solar cells10.1002/adma.201503832 ↗
36. Can slow-moving ions explain hysteresis in the current–voltage curves of perovskite solar cells?10.1039/C5EE02740C ↗
37. Understanding the relationship between ion migration and the anomalous hysteresis in high-efficiency perovskite solar cells: a fresh perspective from halide substitution10.1016/j.nanoen.2016.05.052 ↗
38. Hysteresis-less inverted CH3NH3PbI3 planar perovskite hybrid solar cells with 18.1% power conversion efficiency10.1039/C5EE00120J ↗
39. High-performance perovskite solar cells engineered by an ammonia modified graphene oxide interfacial layer10.1021/acsami.6b02064 ↗
40. Hysteresis-free low-temperature-processed planar perovskite solar cells with 19.1% efficiency10.1039/C6EE01037G ↗
41. Ionic additive engineering toward high‐efficiency perovskite solar cells with reduced grain boundaries and trap density10.1002/adfm.201801985 ↗
42. High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO210.1038/s41467-018-05760-x ↗
43. Reduced defects of MAPbI3 thin films treated by FAI for high‐performance planar perovskite solar cells10.1002/adfm.201805810 ↗
44. Hysteresis‐suppressed high‐efficiency flexible perovskite solar cells using solid‐state ionic‐liquids for effective electron transport10.1002/adma.201600446 ↗
45. Additive enhanced crystallization of solution‐processed perovskite for highly efficient planar‐heterojunction solar cells10.1002/adma.201400231 ↗
46. Enhanced photovoltaic performance of CH3NH3PbI3 perovskite solar cells through interfacial engineering using self-assembling monolayer10.1021/ja512518r ↗
47. Defects in perovskite-halides and their effects in solar cells10.1038/nenergy.2016.149 ↗
48. Recombination in perovskite solar cells: significance of grain boundaries, interface traps, and defect ions10.1021/acsenergylett.7b00236 ↗
49. Efficient and air‐stable mixed‐cation lead mixed‐halide perovskite solar cells with n‐doped organic electron extraction layers10.1002/adma.201604186 ↗
50. A strategy toward air-stable and high-performance ZnO-based perovskite solar cells fabricated under ambient conditions10.1016/j.cej.2017.11.189 ↗
51. Improved the long-term air stability of ZnO-based perovskite solar cells prepared under ambient conditions via surface modification of the electron transport layer using an ionic liquid10.1016/j.electacta.2018.02.103 ↗
52. Ethyl acetate green antisolvent process for high-performance planar low-temperature SnO2-based perovskite solar cells made in ambient air10.1016/j.cej.2019.122298 ↗
53. Low-temperature SnO2-based electron selective contact for efficient and stable perovskite solar cells10.1039/C5TA01207D ↗
54. Mesoporous SnO2 electron selective contact enables UV-stable perovskite solar cells10.1016/j.nanoen.2016.10.055 ↗
55. Alternative electron transport layer based on Al-doped ZnO and SnO2 for perovskite solar cells: impact on microstructure and stability10.1021/acsaem.9b01160 ↗